Bacterial flora and antibiotic resistance from eggs of green turtles Chelonia mydas: An indication of polluted effluents

Sea turtles migrate to various habitats where they can be exposed to different pollutants. Bacteria were collected from turtle eggs and their resistance to antibiotics was used as pollutant bio-indicators of contaminated effluents. Eggs were collected randomly from turtles when they were laying their eggs. A total of 90 eggs were collected and placed into sterile plastic bags (3 eggs/turtle) during June-December of 2003. The bacteria located in the eggshell, albumen and yolk were examined, and 42% of the eggs were contaminated with 10 genera of bacteria. Pseudomonas spp. were the most frequent isolates. The albumen was found to be the part of the egg to be the least contaminated by bacterial infection. Bacterial isolates tested with 14 antibiotics showed variations in resistance. Resistance to ampicillin was the highest. The presence of antibiotic resistant bacteria in eggs indicates that the green turtle populations were subjected to polluted effluents during some of their migratory routes and feeding habitats. Scanning electron microscopy revealed that Salmonella typhimurium penetrated all eggshell layers.     

Sand–Attapulgite Clay Mixtures as a Landfill Liner

Absrtract This paper investigates the potential use of sand–attapulgite (palygorskite) mixtures as a landfill liner. The sand and attapulgite clay used in this study were brought from Wahiba (eastern Oman) and Al-Shuwamiyah (southern Oman), respectively. Initially the basic properties of the sand and clay were determined. Then the attapulgite clay was added to the sand at 5, 10, 20 and 30% by dry weight of the sand. The sand–attapulgite clay mixtures were subjected to mineralogical, chemical, microfabric and geotechnical analyses. The X-ray diffraction (XRD) qualitative analysis showed that attapulgite is the major clay mineral. The chemical compounds, exchangeable cations and cation exchange capacity (CEC) for the␣samples were determined. The CEC for the sand–clay mixtures is low but increases with the increase in clay content. The scanning electron microscope (SEM) examination showed that the addition of clay developed coating between and around the sand grains which results in filling the voids and reducing the hydraulic conductivity of the sand–clay mixtures. The hydraulic conductivity values for the pure clay and sand + 30% clay mixture prepared at 2% above optimum water content are slightly higher than hydraulic conductivity requirements for landfill liners but can be acceptable. The geotechnical study which included grain size distribution, Atterberg limits, specific gravity, compaction, hydraulic conductivity and shear strength tests showed that the sand+30% clay mixture prepared at 2% above optimum water content can be considered to satisfy the requirements for landfill liners. For all sand–clay mixtures no swelling was recorded and the addition of clay to the sand improved the shear strength.     

X-Ray Spectral Study of AGN Sources Content in Some Deep Extragalactic XMM-Newton Fields

We undertake a spectral study of a sample of bright X-ray sources taken from six XMM-Newton fields at high galactic latitudes, where AGN are the most populous class. These six fields were chosen such that the observation had an exposure time more than 60 ksec, had data from the EPIC-pn detector in the full-Frame mode and lying at high galactic latitude |b|>25^∘. The analysis started by fitting the spectra of all sources with an absorbed power-law model, and then we fitted all the spectra with an absorbed power-law with a low energy black-body component model.The sources for which we added a black body gave an F-test probability of 0.01 or less (i.e. at 99% confidence level), were recognized as sources that display soft excess. We perform a comparative analysis of soft excess spectral parameters with respect to the underlying power-law one for sources that satisfy this criterion. Those sources, that do not show evidence for a soft excess, based on the F-test probability at a 99% confidence level, were also fitted with the absorbed power-law with a low energy black-body component model with the black-body temperature fixed at 0.1 and 0.2 keV. We establish upper limits on the soft excess flux for those sources at these two temperatures. Finally we have made use of Aladdin interactive sky atlas and matching with NASA/IPAC Extragalactic Database (NED) to identify the X-ray sources in our sample. For those sources which are identified in the NED catalogue, we make a comparative study of the soft excess phenomenon for different types of systems.     

Neotectonics from Geomorphic Indices: Highlights from Main Mantle Thrust (Pakistan)

Geotectonics - The collision of the Eurasian and Indian plates has resulted in two spatially offset subduction zones, the Makran subduction zone to the south and the Himalayan convergent margin to...     

http://www.sciencedirect.com/science/article/pii/S1674987111001265

Landscapes in tectonically active Hindu Kush（NW Pakistan and NE Afghanistan） result from a complex integration of the effects of vertical and horizontal crustal block motions as well as erosion and deposition processes.Active tectonics in this region have greatly influenced the drainage system and geomorphic expressions.The study area is a junction of three important mountain ranges （Hindu Kush-Karakorum-Himalayas） and is thus an ideal natural laboratory to investigate the relative tectonic activity resulting from the India-Eurasia collision.We evaluate active tectonics using DEM derived drainage network and geomorphic indices hypsometric integral（HI）,stream-length gradient （SL）.fractal dimension（FD）.basin asymmetry factor（AF）.basin shape index（B_s）,valley floor width to valley height ratio（Vf） and mountain front sinuosity(S_mf). The results obtained from these indices were combined to yield an index of relative active tectonics （IRAT） using CIS.The average of the seven measured geomorphic indices was used to evaluate the distribution of relative tectonic activity in the study area.We defined four classes to define the degree of relative tectonic activity:class 1 very high（1.0≤IRAT 1.3）;class 2-high（1.3≥IRAT<1.3）:class 3—moderate（1.5≥IRAT<1.8）;and class 4—low（l.8≥1RAT）.In view of the results.we conclude that this combinetl approach allows the identification of the highly deformed areas related to active tectonics.Landsat imagery and held observations also evidence the presence of active tectonics based on the dellected streams,deformed landforms.active mountain fronts and triangular facets.The indicative values of IRAT are consistent with the areas of known relative uplift rates,landforms and geology.     

Probabilistic tsunami hazard assessment along Oman coast from submarine earthquakes in the Makran subduction zone

The Sultanate of Oman is among the Indian Ocean countries that were subjected to at least two confirmed tsunamis during the twentieth and twenty-first centuries: the 1945 tsunami due to an earthquake in the Makran subduction zone in the Sea of Oman (near-regional field tsunami) and the Indian Ocean tsunami in 2004, caused by an earthquake from the Andaman Sumatra subduction zone (far - field tsunami). In this paper, we present a probabilistic tsunami hazard assessment for the entire coast of Oman from tectonic sources generated along the Makran subduction zone. The tsunami hazard is assessed taking into account the contribution of small- and large-event magnitudes. Results of the earthquake recurrence rate studies and the tsunami numerical modeling for different magnitudes were used through a logic-tree to estimate the tsunami hazard probabilities. We derive probability hazard exceedance maps for the Omani coast considering the exposure times of 100, 250, 500, and 1000 years. The hazard maps consist of computing the likelihood that tsunami waves exceed a specific amplitude. We find that the probability that a maximum wave amplitude exceeds 1 m somewhere along the coast of Oman reaches, respectively, 0.7 and 0.85 for 100 and 250 exposure times, and it is up to 1 for 500 and 1000 years of exposure times. These probability values decrease significantly toward the southern coast of Oman where the tsunami impact, from the earthquakes generated at Makran subduction zone, is low.     

Influence of size of granulated rubber on bearing capacity of fine-grained sand

Nowadays, in most of the advanced and developing countries, waste tires have caused serious environmental problems such as fire and environmental contamination. For reusing them in an appropriate and beneficial way, waste tires have been utilized as a lightweight fill material in geotechnical engineering applications such as highway embankments. In this study, Babolsar fine-grained sand and granulated rubber with sizes in the ranges of 1 to 4, 1 to 9, and 4 to 9 mm were used. A series of model footing tests on reinforced sand with different sizes of granulated rubber were carried out. According to the results, 4- to 9-mm granulated rubber had the highest effect on enhancement of bearing capacity and reduction of fine-grained sand settlement. The results showed that sand-granulated rubber mixtures with granulated rubber in the range of 4 to 9 mm and content of 10% by weight of mixture can increase the bearing capacity of sand up to 50%. In addition, for this mixture, a series of laboratory tests were conducted to determine the optimum width and depth of the reinforcement layer consisting of sand-granulated rubber mixture. The results indicate that the optimum width and the most effective depth of this mixture are 5B and 1B, respectively (where B is the footing width).     

Hydrocarbon potential of the Sargelu Formation,North Iraq

Microscopic and chemical analysis of 85 rock samples from exploratory wells and outcrops in northern Iraq indicate that limestone, black shale and marl within the Middle Jurassic Sargelu Formation contain abundant oil-prone organic matter. For example, one 7-m (23-ft.)-thick section averages 442 mg?HC/g S2 and 439 °C Tmax (Rock-Eval pyrolysis analyses) and 16 wt.% TOC. The organic matter, comprised principally of brazinophyte algae, dinoflagellate cysts, spores, pollen, foraminiferal test linings and phytoclasts, was deposited in a distal, suboxic to anoxic basin and can be correlated with kerogens classified as type A and type B or, alternatively, as type II. The level of thermal maturity is within the oil window with TAI?=?3^? to 3⁺, based on microspore colour of light yellowish brown to brown. Accordingly, good hydrocarbon generation potential is predicted for this formation. Terpane and sterane biomarker distributions, as well as stable isotope values, were determined for oils and potential source rock extracts to determine valid oil-to-source rock correlations. Two subfamily carbonate oil types—one of Middle Jurassic age (Sargelu) carbonate rock and the other of Upper Jurassic/Cretaceous age—as well as a different oil family related to Triassic marls, were identified based on multivariate statistical analysis (HCA and PCA). Middle Jurassic subfamily A oils from Demir Dagh oil field correlate well with rich, marginally mature, Sargelu source rocks in well MK-2 near the city of Baiji. In contrast, subfamily B oils have a greater proportion of R₂₈ steranes, indicating they were generated from Upper Jurassic/Lower Cretaceous carbonates such as those at Gillabat oil field north of Mansuriyah Lake. Oils from Gillabat field thus indicate a lower degree of correlation with the Sargelu source rocks than do oils from Demir Dagh field. One-dimension petroleum system models of key wells were developed using IES PetroMod Software to evaluate burial-thermal history, source-rock maturity and the timing and extent of petroleum generation; interpreted well logs served as input to the models. The oil-generation potential of sulphur-rich Sargelu source rocks was simulated using closed system type II-S kerogen kinetics. Model results indicate that throughout northern Iraq, generation and expulsion of oil from the Sargelu began and ended in the late Miocene. At present, Jurassic source rocks might have generated and expelled between 70 % and 100 % of their total oil.     

An assessment of paleodepositional environment and maturity of organic matter in sediments of the Setap Shale and Belait formations in West Sabah,East Malaysia by organic geochemical methods

The black shale samples collected from two Neogene formations in the Klias Peninsula area, West Sabah, have been assessed and characterized in details by gas chromatography, gas chromatography-mass spectrometry and a variety of organic geochemical parameters. The aims of this study are to describe the characteristics of organic matter of these sediments in terms of source/type of the organic matter, assess its thermal maturity and paleoenvironment of deposition, based primarily on biomarker distributions. The results of both formations do not reveal significant differences within the rock extracts. The gas chromatograms of the saturated hydrocarbon fractions of the Setap Shale and the Belait formations displayed monomodal n-alkane distributions and nearly identical regular sterane compositions with a predominance of C₂₇ regular steranes. These are consistent with open marine depositional environments dominated by marine biological matter. Another related feature of these rock extracts is the presence of a high relative abundance of gammacerane, indicating anoxic marine hypersaline source depositional environment. The relatively high abundance of common land plant-derived biomarkers, such as bicadinanes and oleananes, is a clear indication of a major terrigenous input to the source of the extractable organic matter. The predominance of oleanane biomarkers in both formations is indicative of angiospermis input and Tertiary source rocks. The high C₂₉/C₃₀ hopane ratios, moderate development of C₃₃–C₃₅ hopanes, high abundance of tricyclic terpanes and a slight predominance of C₂₇ regular sterane over C₂₈ and C₂₉ steranes are characteristic features tending to suggest a significant marine influence on these source rocks, thereby suggesting a mixed source input. The 22S/(22S+22R)C₃₂ hopane ratio has reached equilibrium, and this is supported by the high maturity level as indicated by the 22S/22SC_31–33 extended hopane ratios and 20S/(20S+20R)C₂₉ regular steranes ratios.