Jurassic plume-origin ophiolites in Japan: accreted fragments of oceanic plateaus

The Mikabu and Sorachi–Yezo belts comprise Jurassic ophiolitic complexes in Japan, where abundant basaltic to picritic rocks occur as lavas and hyaloclastite blocks. In the studied northern Hamamatsu and Dodaira areas of the Mikabu belt, these rocks are divided into two geochemical types, namely depleted (D-) and enriched (E-) types. In addition, highly enriched (HE-) type has been reported from other areas in literature. The D-type picrites contain highly magnesian relic olivine phenocrysts up to Fo_93.5, and their Fo–NiO trend indicates fractional crystallization from a high-MgO primary magma. The MgO content is calculated as high as 25 wt%, indicating mantle melting at unusually high potential temperature (T _p) up to 1,650 °C. The E-type rocks represent the enrichment in Fe and LREE and the depletion in Mg, Al and HREE relative to the D-type rocks. These chemical characteristics are in good accordance with those of melts from garnet pyroxenite melting. Volcanics in the Sorachi–Yezo belts can be divided into the same types as the Mikabu belt, and the D-type picrites with magnesian olivines also show lines of evidence for production from high T _p mantle. Evidence for the high T _p mantle and geochemical similarities with high-Mg picrites and komatiites from oceanic and continental large igneous provinces (LIPs) indicate that the Mikabu and Sorachi–Yezo belts are accreted oceanic LIPs that were formed from hot large mantle plumes in the Late Jurassic Pacific Ocean. The E- and D-type rocks were formed as magmas generated by garnet pyroxenite melting at an early stage of LIP magmatism and by depleted peridotite melting at the later stage, respectively. The Mikabu belt characteristically bears abundant ultramafic cumulates, which could have been formed by crystal accumulation from a primary magma generated from Fe-rich peridotite mantle source, and the HE-type magma were produced by low degrees partial melting of garnet pyroxenite source. They should have been formed later and in lower temperatures than the E- and D-type rocks. The Mikabu and Sorachi Plateaus were formed in a low-latitude region of the Late Jurassic Pacific Ocean possibly near a subduction zone, partially experienced high P/T metamorphism during subduction, and then uplifted in association with (or without, in case of Mikabu) the supra-subduction zone ophiolite. The Mikabu and Sorachi Plateaus may be the Late Jurassic oceanic LIPs that could have been formed in brotherhood with the Shatsky Rise.     

Emplacement ages and sources of kimberlites and related rocks in southern Africa: U–Pb ages and Sr–Nd isotopes of groundmass perovskite

Groundmass perovskite has been dated by LA-ICPMS in 135 kimberlites and related rocks from 110 localities across southern Africa. Sr and/or Nd isotopes have been analysed by LA-MC-ICPMS in a subset of these and integrated with published data. The age distribution shows peaks at 1,600–1,800, 1,000–1,200, 500–800 and 50–130 Ma. The major “bloom” of Group I kimberlites at ca 90 ± 10 Ma was preceded by a slow build-up in magmatic activity from ca 180 Ma. The main pulse of Group II kimberlites at 120–130 Ma was a distinct episode within this build-up. Comparison of the isotopic data with seismic tomography images suggests that metasomatized subcontinental lithospheric mantle (SCLM) with very low ε _Nd and high ⁸⁷Sr/⁸⁶Sr, (the isotopic signature of Group II kimberlites) was focused in low-Vs zones along translithospheric structures. Such metasomatized zones existed as early as 1,800 Ma, but were only sporadically tapped until the magmatic build-up began at ca 180 Ma, and contributed little to the kimberlitic magmas after ca 110 Ma. We suggest that these metasomatized volumes resided in the deep SCLM and that their low-melting point components were “burned off” by rising temperatures, presumably during an asthenospheric upwelling that led to SCLM thinning and a rise in the ambient geotherm between 120 and 90 Ma. The younger Group I kimberlites therefore rarely interacted with such SCLM, but had improved access to shallower volumes of differently metasomatized, ancient SCLM with low ⁸⁷Sr/⁸⁶Sr and intermediate ε _Nd (0–5). The kimberlite compositions therefore reflect the evolution of the SCLM of southern Africa, with metasomatic-enrichment events from as early as 1.8 Ga, through a major thermal and compositional change at ca 110 Ma, and the major kimberlite “bloom” around 90 Ma.     

Estimation of maximum magnitude (M max ): Impending large earthquakes in northeast region,India

In the present study, the cumulative seismic energy released by earthquakes (M _w ≥ 5) for a period of 1897 to 2009 is analyzed for northeast (NE) India. For this purpose, a homogenized earthquake catalogue in moment magnitude (M _w ) has been prepared. Based on the geology, tectonics and seismicity, the study region is divided into three source zones namely, 1: Arakan-Yoma Zone (AYZ), 2: Himalayan Zone (HZ) and 3: Shillong Plateau Zone (SPZ). The maximum magnitude (M _max ) for each source zone is estimated using Tsuboi’s energy blocked model. As per the energy blocked model, the supply of energy for potential earthquakes in an area is remarkably uniform with respect to time and the difference between the supply energy and cumulative energy released for a span of time, is a good indicator of energy blocked and can be utilized for the estimation of maximum magnitude (M _max ) earthquakes. The proposed process provides a more consistent model of gradual accumulation of strain and non-uniform release through large earthquakes can be applied in the assessment of seismic hazard. Energy blocked for source zone 1, zone 2 and zone 3 regions is 1.35×10¹⁷ Joules, 4.25×10¹⁷ Joules and 7.25×10¹⁷ Joules respectively and will act as a supply for potential earthquakes in due course of time. The estimated M _max for each source zone AYZ, HZ, and SPZ are 8.2, 8.6, and 8.7 respectively. M _max obtained from this model is well comparable with the results of previous workers from NE region.     

Estimation of specific yields of individual litho-units in a terrain with multiple litho-units: A water balance approach

In a terrain with more than one litho-unit, the traditional water balance approach provides a single spatially averaged specific yield. A methodology is proposed here, which can be applied to estimate specific yields of individual litho-units in such terrains. This approach is demonstrated here considering two watersheds, which are covered partly by limestone and partly by sandstone. Watershed wise specific yields were estimated using a traditional water balance method. The specific yields thus obtained are the volume-weighted averages of the specific yields of the individual litho-units in the watersheds. Based on the volumes of aquifers desaturated and the watershed wise specific yield values, a set of two linear equations in two variables was formulated. These linear equations were solved to get the specific yields of the individual litho-units. Specific yields of sandstone (Chandarpur Group) and limestone (Charmuria Formation) units in the study area were thus estimated to be 0.004 and 0.037 respectively.     

Analysing the spatio-temporal evolution of an active debris slide in Eastern Himalaya,India

Landslide is one of the prominent geohazards in the Himalayas where loss of lives and property are common. Owing to the complicated geomorphic and tectono-stratigraphic setting of this active Fold-thrust belt (FTB), landsliding of all possible types and spatial scales observed exhibit conspicuous spatio-temporal signatures and evolution. This evolution of landslides is commonly studied by regional assessment and by examining the multi-temporal landslide inventories of a particular area. The success of creating such multi-temporal landslide inventory depends on (i) the availability of relevant past source data (e.g., images, post event maps, air photos etc.) of suitable resolution, scale and quality, (ii) time of generation of source data with respect to the time of landsliding event, (iii) skill of the investigators in interpreting the old images, air photos etc. However, this method is of restricted use in studying the spatio-temporal evolution of a single landslide which is perennially active in the Himalayan terrain, where rapid changes in land use and land cover patterns readily obliterate the signatures of past landsliding. Moreover because of scale constraints, subtle and frequent changes in the spatial dimensions of these individual landslides, and their temporal activity become difficult to identify in such regional assessment carried out over a larger area. In this study therefore, a different approach is adopted whereby the spatio-temporal activity and style of Lanta Khola landslide, a perennially active and large (0.25 km²) debris flow in the Eastern Himalayas, has been studied in detail through detailed scale (1:1000) site-specific geological mapping in phases during the last 28 years (1983–2011). Such site-specific geological observations coupled with numerical slope stability analysis utilising the limit equilibrium method facilitate in detailed understanding of the temporal and spatial evolution and inherent mechanism of this perennial landslide.     

Spatial heterogeneity in near surface aerosol characteristics across the Brahmaputra valley

In order to examine the spatial variability of the aerosol characteristics across the Brahmaputra valley, a land campaign was conducted during late winter (February 3–March 2) 2011. Measurements of particulate matter (PM, PM₁₀, PM_2.5) and black carbon (BC) concentrations were made onboard an interior redesigned vehicle. The length of the campaign trail stretched about 700 km, covering the longitude belt of 89.97°–95.55°E and latitude belt of 26.1°–27.6°N, comprising 13 measurement locations. The valley is divided into three sectors longitudinally: western sector (R1: 89.97°–91.75°E), middle sector (R2: 92.5°–94.01°E) and eastern sector (R3: 94.63°–95.55°E). Spatial heterogeneity in aerosol distribution has been observed with higher PM₁₀ and PM_2.5 concentrations at the western and middle sectors compared to the eastern sector. The locations in the western sector are found to be rich in BC compared to the other two sectors and there is a gradual decrease in BC concentrations from west to east of the Brahmaputra valley. Two hotspots within the western and middle sectors with high PM and BC concentrations have been identified. The associated physico-optical parameters of PM reveal abundance of PM_2.5 aerosols along the entire valley. High population density in the western and middle sectors, together with the contribution of remote aerosols, leads to higher anthropogenic aerosols over those regions. Spectral Radiation-Transport Model for Aerosol Species (SPRINTARS) slightly underestimates the measured PM₁₀ and PM_2.5 at the eastern sector while the model overestimates the measurements at a number of locations in the western sector. In general, BC is underestimated by the model. The variation of BC within the campaign trail has not been adequately captured by the model leading to higher variance in the western locations as compared to the middle and eastern locations.     

Estimation of sedimentary thickness in the Godavari basin

A major portion of the southern part of the Indian subcontinent is classified as a stable continental region. However, a few segments in this region are punctuated by rifts and shear zones that are seismically active. The Godavari rift that sutures the eastern Dharwar and the Bastar cratons is one such region, prone to seismic hazard. Estimation of the sedimentary thickness in these seismically active regions assumes importance since locales of thick and soft sediments are vulnerable to destruction due to surface waves generated by earthquakes. In the present study, data from five broadband seismological stations are utilized to estimate the average sedimentary thickness of the Godavari region using the difference in travel times of the direct S and converted Sp phases from local earthquakes. The thickness of sediments varies between 0.32 and 4.32 km. Also, the site-specific response in terms of the fundamental resonance frequency and the corresponding amplifications are estimated using the well-established Nakamura technique. The predominant frequencies are in the range of 1.3–4.61 Hz, and the amplifications are higher (>1.5) for the stations inside the Godavari basin. Both the thickness and amplification values clearly indicate that the sediments tend to get thicker toward the center of the basin, in good agreement with the geological distribution of the sedimentary units.     

Rainfall variability and indices of extreme rainfall-analysis and perception study for two stations over Central Himalaya,India

The analysis of rainfall pattern and indices of extreme rainfall events is performed for two meteorological stations located in the Central Himalayan Region which is highly vulnerable to rain-induced hazards. The records of these rain-induced disasters suggest that such events are generally observed in later part of monsoon season, when soil is saturated after monsoon rains. An attempt is made here to test trends of 19 different extreme rainfall indices that have been widely used in the literature, using daily rainfall data for two urban centres (Nainital and Almora) over the period 1992–2005. We have used statistical tools such as Sen’s method and Mann–Kendall test for detection of trend in annual rainfall, monsoon rainfall, number of rainy days and 1-day extreme rainfall. Principal component analysis gives the correlation between different extreme rainfall indices. Time series of principal components are representing the trends of extreme indices, their variation and interrelation between different indices. The perception study conducted in the same sites indicates that extreme rainfall events and change in rainfall amount and timing are well perceived by the local people.     

Dynamic Subsidence Characteristics in Jharia Coalfield,India

Surface ground movements are usually described by a number of characteristic indices such as vertical displacement, horizontal strain and slope, which are an inevitable consequence of underground mining. Every point at the surface over a panel is subjected to strain and slope during mining and its investigation is essential to assess the safety of surface structures. Therefore, the behaviour of dynamic active and residual subsidence was studied for a few panels of Jharia coalfield. The subsidence and slope were linearly related to time. Compressive and tensile strains showed typical fluctuating characteristic behaviour. The rate of mining being a key and controlling parameter for rate of subsidence their inter-relationship was developed, which showed a rational trend. Compressive and tensile strains and slope showed poor correlation with rate of face advance.