Textural characteristics of sediments along the southern Red Sea coastal areas,Saudi Arabia

A lack of understanding exists of the origin and textural characteristics of Saudi Arabian Red Sea coastal sediments. This paper concerns the southern coastline of Jizan on the Saudi Red Sea. It is some 160 km long characterised by either narrow rocky headlands with intermittent pocket beaches or wide low-lying beaches dissected by wadis. Granulometric testing of samples from 135 locations showed that beach sand size was mainly very fine to medium grained (M _z = 3.93 Ø), sorting ranged from 1.65 to 0.41 and skewness values from ?051 to 0.39, being mainly negative; dune sands were medium to fine grained (M _z = 1.13 Ø; average sorting 2.8), while skewness variations within dune samples indicated symmetrical to fine skewed values (б _Ι = 0.55 to 0.89). Most foreshore samples were derived from wadis. Wadi mud levels can be high, e.g. Baysh (84%), and wadi Samrah (90%) with mean grain size ranging from very fine to medium sand (M _z = 3.9 Ø), sorting being well to poor (0.45 to 1.52) due to sediment influxes. Sabkha had a wide range of sand/mud and significantly higher carbonate percentages than other environments. Sediment source differences and littoral reworking contributed to grain size variation. The carbonate content varied between 1.5 and 31.5% due to hinterland contributions, and spatial analysis showed increasing quantities of carbonate minerals towards the south. On the wider geographical front, findings from Jizan are similar to those of the Northern United Arab Emirates (UAE), including sabkhas, being composed of sand, skeletal carbonate, fine fluvial material and wind-blown silt and clay components of wadi origin. Further work on the northeastern Red Sea edge can hopefully confirm these findings.     

Textural and micro-analytical insights into mafic–felsic interactions during the Oruanui eruption,Taupo

Quenched juvenile mafic inclusions (enclaves) are an occasional but informative component in the deposits of large felsic eruptions. Typically, the groundmasses of these inclusions rapidly crystallize as the mafic magma is chilled against a more voluminous, cooler felsic host, providing a physical and chemical record of the nature and timing of mafic–felsic interactions. We examine mafic inclusions of two compositional lineages (tholeiitic and calc-alkaline) from deposits of the 25.4 ka Oruanui eruption (Taupo, New Zealand). 2-D quantitative textural data from analysis of back-scattered electron images reveal a marked diversity in the groundmass textures of the inclusions, including median crystal sizes (amphibole: 14–45 µm; plagioclase: 21–75 µm) and aspect ratios (amphibole: 1.7–4.2; plagioclase: 2.1–4.0), area number densities (amphibole: 122–2660 mm^?2; plagioclase: 117–2990 mm^?2), area fractions (?) of minerals (?_plag?=?23–45%, ?_amph?=?0–28%, ?_cpx?=?0–6%, ?_oxides?=?0.6–5.5%), and the relative abundance of plagioclase and amphibole (?_plag/?_amph?=?1.0–4.6). Textural parameters vary more significantly within, rather than between, the two compositional lineages, and in some cases show marked variations across individual clasts, implying that each inclusion’s cooling history, rather than bulk composition, was the dominant control on textural development. Groundmass mineral compositions are also diverse both within and between inclusions (e.g. plagioclase from An_34–92, with typical intra-clast variability of ~?20 mol%), and do not correlate with bulk chemistry. Diverse groundmass textures and mineral and glass chemistries are inferred to reflect complex interplay of a range of factors including the degree and rate of undercooling, bulk composition, water content and, possibly, intensive variables. Our data are inconsistent with breakup of a crystallizing ponded mafic layer at the base of the Oruanui melt-dominant body, instead implying that each inclusion partially crystallized as a discrete body with a unique cooling history. Extensive ingestion of mush-derived macro-crystals suggests that mechanical breakup of mafic feeder dikes occurred within a transition zone between the mush and melt-dominant magma body. In this zone, the mush lacked yield strength, as has been inferred from field studies of narrow (meters to few tens of meters) mush-melt transition zones preserved in composite intrusions. Evidence for plastic deformation of inclusions during eruption and the abundance of fresh residual glass in inclusions from all eruptive phases suggest that the inclusions formed syn-eruptively, and must have been formed recurrently at multiple stages throughout the eruption.     

Maritime tsunami evacuation guidelines for the Pacific Northwest coast of Oregon

Recent tsunamis affecting the West Coast of the USA have resulted in significant damage to ports and harbors, as well as to recreational and commercial vessels attempting to escape the tsunami. With the completion of tsunami inundation simulations for a distant tsunami originating from the Aleutian Islands and a locally generated tsunami on the Cascadia subduction zone (CSZ), the State of Oregon is now able to provide guidance on the magnitudes and directions of the simulated currents for the Oregon coast and shelf region. Our analyses indicate that first wave arrivals for an Aleutian Island event would take place on the north coast,?~?3 h 40 min after the start of the earthquake,?~?20 min later on the southern Oregon coast. The simulations demonstrated significant along-coast variability in both the tsunamis water levels and currents, caused by localized bathymetric effects (e.g., submarine banks and reefs). A locally generated CSZ event would reach the open coast within 7–13 min; maximum inundation occurs at?~?30–40 min. As the tsunami current velocities increase, the potential for damage in ports and harbors correspondingly increases, while also affecting a vessels ability to maintain control out on the ocean. Scientific consensus suggests that tsunami currents?<?1.54 m/s are unlikely to impact maritime safety in ports and harbors. No such guidance is available for boats operating on the ocean, though studies undertaken in Japan suggest that velocities in the region of 1–2 m/s may be damaging to boats. In addition to the effects of currents, there is the added potential for wave amplification of locally generated wind waves interacting with opposing tsunami currents in the offshore. Our analyses explore potential wave amplification effects for a range of generic sea states, ultimately producing a nomogram of wave amplification for a range of wave and opposing current conditions. These data will be useful for US Coast Guard and Port authorities as they evaluate maritime tsunami evacuation options for the Oregon coast. Finally, we identify three regions of hazard (high, moderate, and low) across the Oregon shelf, which can be used to help guide final designation of tsunami maritime evacuation zones for the coast.     

The Gaojiacun Mafic-Ultramafic Complex （Sichuan, SW China）：Neoproterozoic Magmatic Activity at the Western Margin of the Yangtze Craton

1 Introduction The Gaojiacun intrusive complex is one of the numerous ultramafic-mafic intrusions in Sichuan Province of China. It was mapped during the 1970s and studied mainly by Chinese scientists (e.g. Geological Team 106, 1975; Shen et al., 1986, 1989; CGGJC, 1986; Yang et al., 1993; Li et al., 1995; Shen et al., 2003; Zhu et al., 2004a). Since the year 2000, China has become one of the largest PGE consumers. While the country can produce only less than 1 ton PGE/year, the Chin…     

Virtual water ‘flows’ of the Nile Basin, 1998–2004: A first approximation and implications for water security

This paper interprets an initial approximation of the ‘trade’ in virtual water of Nile Basin states in terms of national water security. The virtual water content (on the basis of weight) of select recorded crop and livestock trade between 1998 and 2004 is provided, and analysed for each state separately, for the Southern Nile and Eastern Nile states as groups, and for the basin states as a whole. To the extent that the datasets allow, the distinction between rainfed and irrigated production is maintained. During the period under study, Nile Basin states ‘exported’ about 14,000 Mm³ of primarily rainfed-derived virtual water outside of the basin annually and ‘imported’ roughly 41,000 Mm³/y. The ‘imports’ are considered to have played a key role in filling the freshwater deficits of Egypt and Sudan, and represent a third of the flow of the Nile River itself. Analysis of food trade within the basin shows that the equivalent of small rivers of water used to raise coffee and tea ‘flow’ from the highlands around Lake Victoria to Egypt and Sudan. Because the bulk of these ‘flows’ derive from rainfed agriculture, the virtual water ‘traded’ annually between the Nile Basin states is not considered to represent a significant demand on the water resources of the basin, nor to significantly remedy the freshwater deficits of the arid basin states. The importance of soil water and rainfed farming is in improving water security is highlighted. The limitations and merits of the inter-state basin-wide approach are also discussed. By highlighting the magnitude of water leaving and entering states in its virtual form, the approach obliges policy-makers to think beyond the basin and reconsider the concept of water security within broader political, environmental, social and economic forces.     

A conduit-related genesis of the Lengshuiqing intrusive assemblage (Sichuan,SW China)

Lengshuiqing is part of the late Proterozoic igneous province from the western margin of the Yangtze craton. The Lengshuiqing area comprises five ultramafic–mafic intrusions, emplaced in the late Proterozoic Yanbian Group. The intrusions from Lengshuiqing contain cumulate ultramafic zones (peridotite + olivine pyroxenite), with cumulus olivine and Cr-spinel, and intercumulus pyroxenes, hornblende, phlogopite and plagioclase. Ni–Cu ore (pyrrhotite + pentlandite + chalcopyrite) is hosted in the ultramafic zones. Olivine-free diorite–quartz diorite ± gabbro and granite zones commonly occur above the ultramafic rocks. The genesis of the intrusions (conduit-related accumulation or differentiation from stagnant magma) was investigated. The amount of sulphides in the intrusions from Lengshuiqing is one order of magnitude bigger than the sulphides that can be dissolved by a volume of mafic magma similar with the volume of the intrusions. Most intrusions from Lengshuiqing have bulk composition (peridotite ± diorite ± granite) more magnesian (MgO = 21–22%; Mg# > 78) than the deduced composition of their parental magma (MgO = 9–11%; Mg# = 64–67). This indicates the accumulation of sulphide and mafic silicates from a volume of magma much bigger than the volume of the intrusions, which can be explained by the fractionation from magma ascending through the intrusions to shallower depths. A continuous supply and vent of magma is consistent with the lack of chilled margins, the melting of the wall rocks and the generation of high-temperature mineral assemblages (K-feldspar, diopside, and sillimanite) in the Yanbian Group. The intrusions from Lengshuiqing are seen as microchambers on conduits draining olivine-, Cr-spinel-, and sulphide-bearing mafic magma from a larger staging chamber.     

Magnetic properties of iron-rich oxisols

Four occurrences of highly magnetic soil in Brazil have been analysed with a view to identifying the magnetic minerals and quantifying the soil magnetization. Techniques used include X-ray diffraction, X-ray fluorescence and Mössbauer spectroscopy. This approach leads us to identify several ways that these soils, which have spontaneous magnetization in the range 1_s<35 j/t/kg,="" can="" come="">One soil, which forms on dolerite (19.6 wt% Fe₂O₃), is found to contain fully-oxidized titanomaghemite inherited from the parent rock. This oxide has a canted ferrimagnetic spin structure with _s=36 J/T/kg of sample. The three others, formed on very iron-rich rock (50–90 wt% Fe₂O₃), contain magnetite or maghemite as the magnetic species and in two cases the soil is more magnetic than the parent rock (largely composed of pure hematite).     

Bayesian updating revisited

Bayesian updating methods provide an alternate philosophy to the characterization of the input variables of a stochastic mathematical model. Here, a priori values of statistical parameters are assumed on subjective grounds or by analysis of a data base from a geologically similar area. As measurements become available during site investigations, updated estimates of parameters characterizing spatial variability are generated. However, in solving the traditional updating equations, an updated covariance matrix may be generated that is not positive-definite, particularly when observed data errors are small. In addition, measurements may indicate that initial estimates of the statistical parameters are poor. The traditional procedure does not have a facility to revise the parameter estimates before the update is carried out. alternatively, Bayesian updating can be viewed as a linear inverse problem that minimizes a weighted combination of solution simplicity and data misfit. Depending on the weight given to the a priori information, a different solution is generated. A Bayesian updating procedure for log-conductivity interpolation that uses a singular value decomposition (SVD) is presented. An efficient and stable algorithm is outlined that computes the updated log-conductivity field and the a posteriori covariance of the estimated values (estimation errors). In addition, an information density matrix is constructed that indicates how well predicted data match observations. Analysis of this matrix indicates the relative importance of the observed data. The SVD updating procedure is used to interpolate the log-conductivity fields of a series of hypothetical aquifers to demonstrate pitfalls and possibilities of the method.