Comparison of heat and bromide as ground water tracers near streams

Heat and bromide were compared as tracers for examining stream/ground water exchanges along the middle reaches of the Santa Clara River, California, during a 10-hour surface water sodium bromide injection test. Three cross sections that comprise six shallow (<1 m) piezometers were installed at the upper, middle, and lower sections of a 17 km long study reach, to monitor temperatures and bromide concentrations in the shallow ground water beneath the stream. A heat and ground water transport simulation model and a closely related solute and ground water transport simulation model were matched up for comparison of simulated and observed temperatures and bromide concentrations in the streambed. Vertical, one-dimensional simulations of sediment temperature were fitted to observed temperature results, to yield apparent streambed hydraulic conductivities in each cross section. The temperature-based hydraulic conductivities were assigned to a solute and ground water transport model to predict sediment bromide concentrations, during the sodium bromide injection test. Vertical, one-dimensional simulations of bromide concentrations in the sediments yielded a good match to the observed bromide concentrations, without adjustment of any model parameters except solute dispersivities. This indicates that, for the spatial and temporal scales examined on the Santa Clara River, the use of heat and bromide as tracers provide comparable information with respect to apparent hydraulic conductivities and fluxes for sediments near streams. In other settings, caution should be used due to differences in the nature of conservative (bromide) versus nonconservative (heat) tracers, particularly when preferential flowpaths are present.     

Environmental history of an urban lake: a palaeolimnological study of Lake Jyväsjärvi, Finland

Sedimentary diatom frustules and chironomid remains, in addition to the chemical stratigraphy of 32 elements and organic pollutants such as resin acids, PCB, DDT and its metabolites, were studied from core samples taken from Lake Jyväsjärvi in Central Finland (64° 14 N, 25° 47 E). The sediment profile covered over 200 years, with the oldest samples representing a period of very low human interference. The town of Jyväskylä was established on the lake shore in 1837, and the lake received untreated municipal wastewater from the town up until, 1977. A paper mill started operations in 1872 and began discharging effluent into Lake Jyväsjärvi. In recent years this effluent loading has been reduced. Based on the biological and chemical properties of the sediment strata, five developmental phases were distinguished and named as follows: (1) a pre-industrial phase (approximately up until the 1860s); (2) a phase of early changes in the lake ecosystem (from the 1870s to ca. 1940s); (3) a phase of increasing eutrophication (from ca. 1950 to ca. 1965); (4) a phase of severe pollution (from ca. 1966 to the early-1990s); and (5) a phase of recovery, which proceeded more quickly during the late-1990s following long-term hypolimnetic aeration. It was estimated that the ecological status of the lake changed from good to moderate during the second phase. Due to the poor chemical status of the lake (including increased concentrations of harmful substances) and the pronounced changes in diatom and chironomid communities, the ecological status from 1950 to the early-1990s was classified as bad. The present ecological status, after a slow recovery of about 20 years, can be classified as moderate/poor. Chemical analysis of the sediment revealed that some elements (C, N, P, S, Ba, Cd, Cu, Fe, Pb, Ni and Zn) followed the known history of municipal waste water discharge into the lake, but Hg, Cr and persistent organic pollutants had different stratigraphies, and therefore mainly originated from other sources. Pronounced changes in profundal benthic communities (chironomids) started about 80 years later than those in diatoms, but later changes in chironomid assemblages were greater than those in diatoms.     

Geostatistics and Bayesian updating for transmissivity estimation in a multiaquifer system in Manitoba,Canada

In ground water flow and transport modeling, the heterogeneous nature of porous media has a considerable effect on the resulting flow and solute transport. Some method of generating the heterogeneous field from a limited dataset of uncertain measurements is required. Bayesian updating is one method that interpolates from an uncertain dataset using the statistics of the underlying probability distribution function. In this paper, Bayesian updating was used to determine the heterogeneous natural log transmissivity field for a carbonate and a sandstone aquifer in southern Manitoba. It was determined that the transmissivity in m²/sec followed a natural log normal distribution for both aquifers with a mean of -7.2 and - 8.0 for the carbonate and sandstone aquifers, respectively. The variograms were calculated using an estimator developed by Li and Lake (1994). Fractal nature was not evident in the variogram from either aquifer. The Bayesian updating heterogeneous field provided good results even in cases where little data was available. A large transmissivity zone in the sandstone aquifer was created by the Bayesian procedure, which is not a reflection of any deterministic consideration, but is a natural outcome of updating a prior probability distribution function with observations. The statistical model returns a result that is very reasonable; that is homogeneous in regions where little or no information is available to alter an initial state. No long range correlation trends or fractal behavior of the log-transmissivity field was observed in either aquifer over a distance of about 300 km.     

A mapping of the electron localization function for the silica polymorphs: evidence for domains of electron pairs and sites of potential electrophilic attack

The electron localization function, η, evaluated for first-principles geometry optimized model structures generated for quartz and coesite, reveals that the oxide anions are coordinated by two hemispherically shaped η-isosurfaces located along each of the SiO bond vectors comprising the SiOSi angles. With one exception, they are also coordinated by larger banana-shaped isosurfaces oriented perpendicular to the plane centered in the vicinity of the apex of each angle. The hemispherical isosurfaces, ascribed to domains of localized bond-pair electrons, are centered ～0.70 Å along the bond vectors from the oxide anions and the banana-shaped isosurfaces, ascribed to domains of localized nonbonding lone-pair electrons, are centered ～0.60 Å from the apex of the angle. The oxide anion comprising the straight SiOSi angle in coesite is the one exception in that the banana-shaped isosurface is missing; however, it is coordinated by two hemispherically shaped isosurfaces that lie along the bond vectors. In the case of a first-principles model structure generated for stishovite, the oxide anion is coordinated by five hemispherically shaped η-isosurfaces, one located along each of the three SiO bond vectors (ascribed to domains of bonding-electron pairs) that are linked to the anion with the remaining two (ascribed to domains of nonbonding-electron pairs) located on opposite sides of the plane defined by three vectors, each isosurface at a distance of ～0.5 Å from the anion. The distribution of the five isosurfaces is in a one-to-one correspondence with the distribution of the maxima displayed by experimental Δρ and theoretical ??²ρ maps. Isosurface η maps calculated for quartz and the (HO) ₃ SiOSi(OH) ₃ molecule also exhibit maxima that correspond with the (3,?3) maxima displayed by distributions of ??²ρ. Deformation maps observed for the SiOSi bridges for the silica polymorphs and a number of silicates are similar to that calculated for the molecule but, for the majority, the maxima ascribed to lone-pair features are absent. The domains of localized nonbonding-electron pair coordinating the oxide anions of quartz and coesite provide a basis for explaining the flexibility and the wide range of the SiOSi angles exhibited by the silica polymorphs with four-coordinate Si. They also provide a basis for explaining why the SiO bond length in coesite decreases with increasing angle. As found in studies of the interactions of solute molecules with a solvent, a mapping of η-isosurfaces for geometry-optimized silicates is expected to become a powerful tool for deducing potential sites of electrophilic attack and reactivity for Earth materials. The positions of the features ascribed to the lone pairs in coesite correspond with the positions of the H atoms recently reported for an H-doped coesite crystal.     

Bed waves at the basin scale: implications for river management and restoration

An extensive literature about fluvial sediment waves, slugs or pulses has emerged in the past 20 years. The concept has been useful in many respects, but has been applied to diverse phenomena using a variety of definitions. Moreover, inferred linkages between channel‐bed changes and sediment loads are often not justifiable. This paper reviews concepts of large fluvial sediment waves at scales extending to several tens of kilometres. It points out constraints on the inferences that can be made about sediment loads based on changes in channel‐bed elevation at this scale where channel sediment interacts with storage in floodplain and terrace deposits. The type area of G. K. Gilbert's initial sediment‐wave concept is re‐examined to show that neither wave translation nor dispersion occurred in the simple manner commonly assumed. Channel aggradation and return to graded conditions provide an alternative theory explaining Gilbert's observed bed‐elevation changes. Recognizing the evidence and implications of the former passage of a large‐scale bed wave is essential to the accurate diagnosis of catchment conditions and the adoption of appropriate river restoration goals or methods. Sediment loads, water quality, channel morphologic stability and aquatic ecosystems often reflect changes in sediment storage long after the channel bed has returned to grade. Copyright © 2006 John Wiley & Sons, Ltd.     

Mobile Space-Time Envelopes for Location-Based Services

The convergence and miniaturisation of a range of information and communication technologies, together with increasing bandwidth availability and near ubiquity of mobile phones, are giving rise to a technological environment in which location‐based services (LBS) can realistically develop. In this paper we review the nature of location‐based services and the implications for data and spatial queries. In doing so, we put forward a research agenda that arises for geographical information science and engineering. Central to LBS are problems of response time and the information utility of responses to queries and any pushed alerts, where information utility refers to content, timeliness and geographical footprint. Within a publish/subscribe model of LBS provision, we propose mobile space‐time envelopes as a novel approach to event brokerage. These envelopes simultaneously provide ‘soft clip’ pruning of candidate data sets in anticipation of queries, and provide the trigger that subscribers are pertinently in‐range for alerts. We present the geometrical, algebraic and algorithmic concepts of mobile space‐time envelopes and provide an example of these mobile envelopes in action. We conclude with a discussion of how this initial implementation could be further developed to incorporate added spatio‐temporal intelligence.     

Simulation of monsoon depressions using MM5: sensitivity to cumulus parameterization schemes

Summary The sensitivity of the simulation of the monsoon depressions to the cumulus parameterization schemes used in a numerical model is studied using the Pennsylvania State University – National Center for Atmospheric Research (PSU-NCAR) model MM5 version 3.6.2. Three different cases of monsoon depressions were studied with a two way interacting domains of 45 km and 15 km resolutions. Two different cumulus parameterization schemes namely Grell (GR) and Kain-Fritsch (KF) were used for the sensitivity study. The model was integrated for 48 hours with the initial and boundary conditions of European Center for Medium Range Weather Forecasting Reanalysis (ERA-40) data. The results show that both the schemes are able to simulate the large scale features of the monsoon depressions realistically. However, both the schemes failed to simulate the exact location of the depression after 24- and 48-hour simulation. The rainfall simulations of both the schemes were very different. The model with the GR scheme tends to over predict the rainfall. The KF scheme could simulate the distribution of the rainfall comparable to the observations. The KF scheme could simulate the maximum observed rainfall but due to locational errors of the simulated depression, the location of the maximum rainfall was not exact. It is also seen that the resolution of the model has a positive impact on the rainfall simulation. The GR and KF schemes were able to realistically simulate the apparent heat sources, but the apparent moisture profile simulated with KF scheme was more comparable to the verifying analysis. The root mean square errors of mean sea-level pressure, temperature, zonal wind and meridional wind were smaller for KF simulation compared to the GR simulation. Permanent affiliation: Center for Development of Advanced Computing, Pune University Campus, Ganeshkhind, Pune-411 007, India.     

Holocene displacement along branch and secondary faults in the San Andreas fault zone, southern California

Detailed geologic mapping of the San Andreas fault zone in Los Angeles County since 1972 has revealed evidence for diverse histories of displacement on branch and secondary faults near Palmdale. The main trace of the San Andreas fault is well defined by a variety of physiographic features. The geologic record supports the concept of many kilometers of lateral displacement on the main trace and on some secondary faults, especially when dealing with pre-Quaternary rocks. However, the distribution of upper Pleistocene rocks along branch and secondary faults suggests a strong vertical component of displacement and, in many locations, Holocene displacement appears to be primarily vertical. The most recent movement on many secondary and some branch faults has been either high-angle (reverse and normal) or thrust. This is in contrast to the abundant evidence for lateral movement seen along the main San Andreas fault. We suggest that this change in the sense of displacement is more common than has been previously recognized.The branch and secondary faults described here have geomorphic features along them that are as fresh as similar features visible along the most recent trace of the San Andreas fault. From this we infer that surface rupture occurred on these faults in 1857, as it did on the main San Andreas fault. Branch faults commonly form “Riedel” and “thrust” shear configurations adjacent to the main San Andreas fault and affect a zone less than a few hundred meters wide. Holocene and upper Pleistocene deposits have been repeatedly offset along faults that also separate contrasting older rocks. Secondary faults are located up to 1500 m on either side of the San Andreas fault and trend subparallel to it. Moreover, our mapping indicates that some portions of these secondary faults appear to have been “inactive” throughout much of Quaternary time, even though Holocene and upper Pleistocene deposits have been repeatedly offset along other parts of these same faults. For example, near 37th Street E. and Barrel Springs Road, a limited stretch of the Nadeau fault has a very fresh normal scarp, in one place as much as 3 m high, which breaks upper Pleistocene or Holocene deposits. This scarp has two bevelled surfaces, the upper surface sloping significantly less than the lower, suggesting at least two periods of recent movement. Other exposures along this fault show undisturbed Quaternary deposits overlying the fault. The Cemetery and Little Rock faults also exhibit selected reactivation of isolated segments separated by “inactive” stretches.Activity on branch and secondary faults, as outlined above, is presumed to be the result of sympathetic movement on limited segments of older faults in response to major movement on the San Andreas fault. The recognition that Holocene activity is possible on faults where much of the evidence suggests prolonged inactivity emphasizes the need for regional, as well as detailed site studies to evaluate adequately the hazard of any fault trace in a major fault zone. Similar problems may be encountered when geodetic or other studies, Which depend on stable sites, are conducted in the vicinity of major faults.