Kerman Clay Improvement by Lime and Bentonite to Be Used as Materials of Landfill Liner

Kerman province, located in the south eastern Iran, is dominated with clays which can be used in different projects. The liner system within a landfill is constructed to control leachate migration and can be constructed by low permeable natural soils or plastic lining materials, environmentally however, natural materials is preferred that usually need to be amended in order to meet requirements recommended by environmental agencies. This research examines the possibility of using the Kerman collapsible clay as a liner layer material. A set of laboratory test was conducted on pure soil samples and additive treated samples. The moderate collapse potential of the used soil is decreased with wet compaction and under the effect of additive-soil reactions. Laboratory investigations showed that lime and bentonite treatment improved the hydraulic conductivity. The results revealed hydraulic conductivities on the order of 10^?8 m/s. The obtained values met the 1.0E?07 m/s criterion required by Iranian standards. Unconfined compression tests were also performed on pure soil and additive amended samples. The unconfined compression strength values demonstrated gradual decreases with the addition of bentonite and considerable increases with adding lime such that with adding 1% lime the unconfined compression strength increased by 75%. This study verified that the Kerman collapsing clay can be used as a liner material using lime and bentonite as additives.     

Bedload resistance in supercritical flow

The movement of bedload in subcritical flow produces additional roughness as compared to flow in a rigid bed. The magnitude of this bed load roughness is proportional to the thickness of the sediment layer moving along the bed, the particle size and the sediment concentration. In a supercritical flow, however, further resistance is expected due to the momentum absorption by the high flow velocity. In this study the effect of sediment movement on the flow resistance in supercritical flow was experimentally investigated. The experiments included flows over smooth and rough beds carrying sediment of mean diameters D50=2.80, 5.42 and 7.06 mm in a rigid rectangular channel. The results show that the sediment transport may increase the friction factor by up to 90% and 60% in smooth and rough beds, respectively. Bedload extracts its momentum from the flow, which causes a reduction of near bed flow velocity and steeper velocity gradient near the bed resulting in an increase in shear velocity as well as in roughness height. The increase in friction factor is directly related to bedload concentration and particle size.     

Geospatial modeling to identify the effects of anthropogenic processes on landscape pattern change and biodiversity

This research used geospatial data to quantify biodiversity changes and landscape pattern change to track anthropogenic impacts of such changes at the Mouteh Wildlife Refuge (MWR), Isfahan, Iran. Satellite image duration of four decades, LandSat_1-5, and IRS-P6 data were used to develop land cover classification maps for 1971, 1987, 1998, and 2011. The number and size of land cover patches, the degree of naturalness, and the diversity indices were calculated and compared for a 40-year period. The results showed an increasing concern with regard to unplanned human activities. Some improvements of the natural landscape also occurred in the core protected zone of the study area. The number and size of land cover patches, the degree of naturalness, and the diversity indices were calculated. Overall changes in natural land use between 1971 and 1998 at MWR showed that the number of patches for natural land use has increased, but it also showed a decrease in 2011. Similar changes were observed for seminatural land use. Within the artificial classes, the number and area of patches were higher and the largest patch occurred in 2011. The maximum variation of diversity is related to the year 2011. The results showed an increasing concern with regard to unplanned human activities. Some improvements of the natural landscape also occurred in the core protected zone of the study area. Remote sensing and geographic information system offers an important means of detecting and analyzing temporal changes occurring in our landscape.     

Interlobate esker architecture and related hydrogeological features derived from a combination of high-resolution reflection seismics and refraction tomography,Virttaankangas, southwest Finland

A novel high-resolution (2–4 m source and receiver spacing) reflection and refraction seismic survey was carried out for aquifer characterization and to confirm the existing depositional model of the interlobate esker of Virttaankangas, which is part of the Säkylänharju-Virttaankangas glaciofluvial esker-chain complex in southwest Finland. The interlobate esker complex hosting the managed aquifer recharge (MAR) plant is the source of the entire water supply for the city of Turku and its surrounding municipalities. An accurate delineation of the aquifer is therefore critical for long-term MAR planning and sustainable use of the esker resources. Moreover, an additional target was to resolve the poorly known stratigraphy of the 70–100-m-thick glacial deposits overlying a zone of fractured bedrock. Bedrock surface as well as fracture zones were confirmed through combined reflection seismic and refraction tomography results and further validated against existing borehole information. The high-resolution seismic data proved successful in accurately delineating the esker cores and revealing complex stratigraphy from fan lobes to kettle holes, providing valuable information for potential new pumping wells. This study illustrates the potential of geophysical methods for fast and cost-effective esker studies, in particular the digital-based landstreamer and its combination with geophone-based wireless recorders, where the cover sediments are reasonably thick.

     

Chemical weathering and gully erosion causing land degradation in a complex river basin of Eastern India: an integrated field,analytical and artificial intelligence approach

Hot and humid subtropical plateau regions are susceptible to land degradation in the form of weathering and gully erosion. Here, we investigate chemical weathering, gully erosion and cohesiveness through field-based measurements with a view to understand the controlling factors of potential land degradation, in complex river basin of the Chotanagpur plateau region in Eastern India. The layers of controlling factors of gully erosion were developed and prioritized considering boosted regression tree (BRT), alternative decision tree (ADT), particle swarm optimization (PSO) and random forest (RF) algorithms in the R software, and the results of these methods were also validated using receiver operating characteristic (ROC) curves. The spectroscopic analysis was carried out of collected soil samples to measure the degree of chemical weathering and cohesiveness. Furthermore, the climatic elements like temperature and rainfall were also considered for estimating the chemical weathering. The results of the gully erosion models (i.e., BRT, ADT, PSO and RF) show remarkable accuracy with ROC values of 0.93, 0.89, 0.91 and 0.84, respectively. An advanced decision tree model was integrated with the results of degree of chemical weathering and cohesiveness in geographical information system platform. The land degradation map developed from this approach shows that 10.53% of the study area is highly affected, whereas 17.36% area is moderately affected and the rest of the 73.85% area is less affected by land degradation. Our results provide essential information for policy makers in adopting measures for minimizing and controlling the land degradation. Our novel approach is significant to assess land degradation to a large scale.

     

The Paleo‐Proterozoic High Heat Production Richardson Granite,Great Bear Magmatic Zone,Northwest Territories,Canada: Source of U for Port Radium?

Airborne radiometric survey and field studies outlined a large, elongate, high‐level plutonic suite within the Richardson pluton south of the Contact Lake Belt in the Great Bear Magmatic Zone, Northwest Territories, Canada. In terms of content of radioactive elements, the Richardson pluton is composed of two distinct granite types, low heat production (LHP) and high heat production (HHP). Uranium content in the LHP and HHP granites ranges from 3.0 to 4.9 ppm and 6.5 to 24.6 ppm, respectively, showing similarity of the LHP granite to average granites. Geochemical studies indicate that there is a genetic relationship between these two types of granite; the LHP granite was the early product of magma crystallization, whereas the HHP granite is the result of extensive crystal fractionation of biotite, plagioclase and apatite. The presence of magmatic fluorite in granite suggests that high fluorine content lowered the liquidus temperature of magma causing lower temperature fractionation during ascent to high crustal levels, which increased U and Th concentrations in the resultant HHP granite. Weak U mineralization occurs locally as discontinuous quartz ± hematite ± pitchblende veins and veinlets within the HHP granite. Stronger U mineralization (U ± Ag ± Ni ± Co ± Cu) occurred in the past‐producing Contact Lake and Port Radium deposits. It appears that such mineralization may have had a spatial and temporal genetic‐paragenetic relationship with the HHP granite.     

Multi-sensor approach to settlement analysis of earth dams

In this paper, a fusion method for the settlement study of the earth dams based on geodetic and geotechnical data is developed. The developed method can be algorithmically explained as follows: (a) interpolation of the geotechnical data to the epoch of geodetic observations by four degree polynomial fitting, which serves as a low-pass filter. (b) Conversion of the initial observations into time series of the dam heights at the geodetic and geotechnical stations. (c) Fusion of the data from the two sources at different fusion levels. (d) Final decision based on the deformation parameters derived from fused data. The significant innovation of the proposed method centered upon its ability to incorporate geodetic and geotechnical observation types into a one integrated solution through fusion. The method is numerically tested for the Karkhe earth dam by using geodetic and geotechnical data from 1997 till 2009. The numerical evaluation at 229 check points indicates more than 70% improvement in the settlementmodeling based on the fusion of the geodetic and geotechnical data, as compared to the settlement modeling based on geotechnical data alone.     

Dinoflagellate cysts from the Upper Bajocian–Lower Oxfordian of the Dalichai Formation in Binalud Mountains (NE Iran): their biostratigraphical and biogeographical significance

The Binalud Mountains of NE Iran represent the easternmost extension of the Alborz Range. After the Mid-Cimmerian orogenic event and rapid subsidence, the deep marine sediments of the Dalichai Formation were deposited. A well-preserved section of the formation was sampled for palynological purposes. The study revealed diverse and nearly well-preserved dinoflagellate cyst assemblages. Thirty-six dinoflagellate cyst species identified lead to identification of four biozones: Cribroperidinium crispum (Late Bajocian), Dichadogonyaulax sellwoodii (Bathonian to Early Callovian), Ctenidodinium continuum (Early to Late Callovian), and Ctenidodinium tenellum (Early Oxfordian) biozones. The close similarities of dinoflagellate cyst assemblages between Binalud Mountains, NE Iran, with those of Alborz Mountains (Northern Iran) during Middle Jurassic confirm the connection between two sedimentary basins during this time in Iran. Meanwhile, this biozonation corresponds largely to that established in Northwest Europe and reveals the marine connection between NE and North of Iran with Northwest Europe and the Northwestern Tethys during the Late Bajocian to Early Oxfordian.     

Determinants of Adaptation to Climate Change:A Case Study of Rice Farmers in Western Province,Iran

The decisions made by agricultural households to adjust to climate change(CC)in Iran are not well known.This study is intended to investigate the influence of perceptions and socioeconomic,institutional features on farmers’adaptation decisions about CC,which constitute the hypothetical statements of the study.We undertook a survey of 200 farm householders from 31 villages of Ilam Province,situated in the western Iran,as randomly selected.The result discloses that the proposed discriminant model matches the dataset well,with a strong effect size of partial eta-squared(η²=0.38).The analysis further signals that adapters are younger and more welleducated than non-adapters.Adapters are also knowledgeable about CC risks and institutional policy barriers.The adapters have subsidiary work,better access to credit,and have good contacts with expansion agents and specialists.The paper concludes that government authorities should provide farmers with the enriched capabilities and competencies enabling them to adapt to CC.     

A new ellipsoidal gravimetric, satellite altimetry and astronomic boundary value problem, a case study: The geoid of Iran

A new gravimetric, satellite altimetry, astronomical ellipsoidal boundary value problem for geoid computations has been developed and successfully tested. This boundary value problem has been constructed for gravity observables of the type (i) gravity potential, (ii) gravity intensity (i.e. modulus of gravity acceleration), (iii) astronomical longitude, (iv) astronomical latitude and (v) satellite altimetry observations. The ellipsoidal coordinates of the observation points have been considered as known quantities in the set-up of the problem in the light of availability of GPS coordinates. The developed boundary value problem is ellipsoidal by nature and as such takes advantage of high precision GPS observations in the set-up. The algorithmic steps of the solution of the boundary value problem are as follows:

- Application of the ellipsoidal harmonic expansion complete up to degree and order 360 and of the ellipsoidal centrifugal field for the removal of the effect of global gravity and the isostasy field from the gravity intensity and the astronomical observations at the surface of the Earth.

- Application of the ellipsoidal Newton integral on the multi-cylindrical equal-area map projection surface for the removal from the gravity intensity and the astronomical observations at the surface of the Earth the effect of the residual masses at the radius of up to 55 km from the computational point.

- Application of the ellipsoidal harmonic expansion complete up to degree and order 360 and ellipsoidal centrifugal field for the removal from the geoidal undulations derived from satellite altimetry the effect of the global gravity and isostasy on the geoidal undulations.

- Application of the ellipsoidal Newton integral on the multi-cylindrical equal-area map projection surface for the removal from the geoidal undulations derived from satellite altimetry the effect of the water masses outside the reference ellipsoid within a radius of 55 km around the computational point.

- Least squares solution of the observation equations of the incremental quantities derived from aforementioned steps in order to obtain the incremental gravity potential at the surface of the reference ellipsoid.

- The removed effects at the application points are restored on the surface of reference ellipsoid.

- Application of the ellipsoidal Bruns’ formula for converting the potential values on the surface of the reference ellipsoid into the geoidal heights with respect to the reference ellipsoid.

- Computation of the geoid of Iran has successfully tested this new methodology.