The effects of hydrometer reading times on the spatial variability of soil textures in southeast Iran

Soil texture is an important physical soil property that may contribute to variations in many soil functions as well as nutrient storage and availability, water retention, and soil erosion. Although several methods for determining the texture classes of soil particles have been proposed, differences among hydrometer reading times have presented challenges in determining the precise soil texture classes. Therefore, this study was conducted to evaluate the effects of hydrometer reading time on the spatial variability of soil textures in the Rafsanjan area, southeast Iran. To accomplish this, 77 soil samples were collected on a 500-m square sampling grid from depths of 0–40, 40–80, and 80–120 cm, and their particle sizes were determined through analysis for 40 s, 2 h, 6.5 h, and 8 h using the Bouyoucos hydrometer method. The results showed a strong spatial correlation in the soil particles among sampling soil layers and across the study area. Moreover, the differences among hydrometer reading times did not have a significant impact on determination of coarse soil texture classes, although they did influence determination of the finer classes. Although the 8 h reading time provided the most accurate response with respect to mechanical analysis of a soil, after 6.5 h the hydrometer could also largely (more than 80.0 %, on average) achieve this goal. Additionally, the 2 h hydrometer reading time could also be useful for the initial assessment or general overview of the soil texture in a certain region; however, it is not recommended for precision agriculture or site-specific management.     

Dinoflagellate cysts from the Upper Bajocian–Lower Oxfordian of the Dalichai Formation in Binalud Mountains (NE Iran): their biostratigraphical and biogeographical significance

The Binalud Mountains of NE Iran represent the easternmost extension of the Alborz Range. After the Mid-Cimmerian orogenic event and rapid subsidence, the deep marine sediments of the Dalichai Formation were deposited. A well-preserved section of the formation was sampled for palynological purposes. The study revealed diverse and nearly well-preserved dinoflagellate cyst assemblages. Thirty-six dinoflagellate cyst species identified lead to identification of four biozones: Cribroperidinium crispum (Late Bajocian), Dichadogonyaulax sellwoodii (Bathonian to Early Callovian), Ctenidodinium continuum (Early to Late Callovian), and Ctenidodinium tenellum (Early Oxfordian) biozones. The close similarities of dinoflagellate cyst assemblages between Binalud Mountains, NE Iran, with those of Alborz Mountains (Northern Iran) during Middle Jurassic confirm the connection between two sedimentary basins during this time in Iran. Meanwhile, this biozonation corresponds largely to that established in Northwest Europe and reveals the marine connection between NE and North of Iran with Northwest Europe and the Northwestern Tethys during the Late Bajocian to Early Oxfordian.     

Determinants of Adaptation to Climate Change:A Case Study of Rice Farmers in Western Province,Iran

The decisions made by agricultural households to adjust to climate change(CC)in Iran are not well known.This study is intended to investigate the influence of perceptions and socioeconomic,institutional features on farmers’adaptation decisions about CC,which constitute the hypothetical statements of the study.We undertook a survey of 200 farm householders from 31 villages of Ilam Province,situated in the western Iran,as randomly selected.The result discloses that the proposed discriminant model matches the dataset well,with a strong effect size of partial eta-squared(η²=0.38).The analysis further signals that adapters are younger and more welleducated than non-adapters.Adapters are also knowledgeable about CC risks and institutional policy barriers.The adapters have subsidiary work,better access to credit,and have good contacts with expansion agents and specialists.The paper concludes that government authorities should provide farmers with the enriched capabilities and competencies enabling them to adapt to CC.     

Metal Concentrations in the Coastal Fauna of the Caspian Sea

Ocean Science Journal - Metal concentrations were measured in predominant coastal fauna of the Caspian Sea including six macro-invertebrates (Mnemiposis leidyi, Balanus improvisus, Pontogammarus...     

Using hydrologic and hydraulically derived geometric parameters of perennial rivers to determine minimum water requirements of ecological habitats (case study: Mazandaran Sea Basin—Iran)

This paper studies one of the most important problems of dry countries that are confronted with water deficit and the competition of rivals to allocate water. Some common methods have been investigated for computing the minimum water requirement to save a river's biological activity. After a discussion of the currently used method in Iran (the Tenant Method), the application of some other methods, which are known as Hydraulic and Hydrological Methods, is illustrated. The case study is a river in the northern part of Iran and this research addresses the critical situation of this river in near future regarding the planned anthropogenic alteration and its consequences. It has been shown that the application of environmental water allocation methods that have no background in a region could be misleading. The first proposed method is the Texas Method, in which flexibility in water allocation helps to develop an integrated river management paradigm in the study area. The second preferred method is a Hydraulic Method, by which the implementation of morphological parameters or flow geometrical properties could sustain physical habitat within an acceptable range in terms of depth, width, velocity, and bed shear stress. In the case study, the Maximum Curvature Method was superior to the Slope Method. The investigation revealed that using a widely recommended slope of 1 for the discharge‐wetted perimeter function can lead to an overestimated and unacceptable discharge. The Tenant Method in respect to minimum environmental flow requirement yielded the weakest result, and it has been illustrated that its application might impose irrecoverable shock to the ecosystem. The Flow Duration Curve Method (the Q₉₅ Method), in spite of its subjectivity, showed more compatibility with the river's condition in comparison with the Tenant Method. Copyright © 2011 John Wiley & Sons, Ltd.     

Evolution of filamentary molecular clouds in the presence of magnetic fields

The purpose of this paper is to explore the effect of magnetic fields on the dynamics of magnetized filamentary molecular clouds.We suppose there is a filament with cylindrical symmetry and two components of axial and toroidal magnetic fields.In comparison to previous works,the novelty in the present work involves a similarity solution that does not define a function of the magnetic fields or density.We consider the effect of the magnetic field on the collapse of the filament in both axial and toroidal directions and show that the magnetic field has a braking effect,which means that the increasing intensity of the magnetic field reduces the velocity of collapse.This is consistent with other studies.We find that the magnetic field in the central region tends to be aligned with the filament axis.Also,the magnitude and the direction of the magnetic field depend on the magnitude and direction of the initial magnetic field in the outer region.Moreover,we show that more energy dissipation from the filament causes a rise in the infall velocity.     

A recent scenario of mass wasting and its impact on the transportation in Alborz Mountains, Iran using geo-information technology

Mass movements or mass wasting is being considered as one of the severe forms of natural disasters. Iran is geographically located in the Alps–Himalaya seismicity belt. It has a high potential to mass wasting. This seismic phenomenon creates landslides and rock falls in the high mountains of Alborz and Zagros. These mass movements and various types of slides can be systematically assessed and mapped through traditional mapping frameworks using geo-information technologies. The geo-information-based technology offers the earth scientist to study and map various types of mass movement and stability of slopes. In this study, we used field data coupling with the tectonic-related factors to provide a solution for slope-related hazards. Firstly, various geological and geomorphological factors such as lineaments and faults, vegetation, lithology, slope, drainage, land use/land cover, seismicity and roads network were extracted and compiled using geo-information technology. This is because the factors mentioned above play important role in the instability of the region. Then, the study area was divided into four regions based on the rate of mass wasting and its degree of vulnerability. The results of this study showed that the erosion in Karaj formation is severe. Additionally, this research also reveals that the hydrothermal solutions caused by the erosional activities have influenced the glassy element of tuffs and subsequently changed into the clays. This change has caused the tuffs to be relatively unstable. Further, it is evident that the chemical and physical weathering has had a big impact on it whilst most of the mass wasting has occurred within the unstable tuffs of Karaj formation. Finally, the paper concluded that the recent construction of the new roads in the region has increased the potential danger for generating the mass wastes and thus makes the region more unstable.     

Comprehensive study of the biophysical parameters of agricultural crops based on assessing Landsat 8 OLI and Landsat 7 ETM+ vegetation indices

For three agricultural crop types, winter wheat (Triticum aestivum L.), barley (Hordeum vulgare L.), and canola (Brassica napus L.), we estimated biophysical parameters including fresh and dry biomass, leaf area index (LAI), and vegetation water content, for which we found the equivalent water thickness (EWT), fuel moisture content per fresh weight (FMC_FW), and fuel moisture content per dry weight (FMC_DW). We performed these estimations using data from the newly launched Landsat 8 Operational Land Imager (OLI) sensor, as well as its predecessor the Landsat 7 Enhanced Thematic Mapper Plus (ETM+). Progress in the design of the new sensor (i.e., Landsat 8), including narrower near-infrared (NIR) wavebands, higher signal-to-noise ratio (SNR), and greater radiometric resolution highlights the necessity to investigate the biophysical parameters of agricultural crops, especially compared to data from its predecessor. This study aims to evaluate vegetation indices (VIs) derived from the Landsat 8 OLI and the Landsat 7 ETM+. Both the Landsat 8 OLI and Landsat 7 ETM+ VIs agreed well with in-situ data measurements. However, the Landsat 8 OLI-derived VIs were generally more consistent with in situ data than the Landsat 7 ETM+ VIs. We also note that the Landsat 8 OLI is better able to capture the small variability of the VIs because of its higher SNR and wider radiometric range; in addition, the saturation phenomenon occurred earlier for the Landsat 7 ETM+ than for the Landsat 8 OLI. This indicates that the new sensor is better able to estimate the biophysical parameters of crops.     

Characteristics of Mineralizing Fluids of the Darreh‐Zerreshk and Ali‐Abad Porphyry Copper Deposits,Central Iran,Determined by Fluid Inclusion Microthermometry

The Darreh‐Zereshk (DZ) and Ali‐Abad (AB) porphyry copper deposits are located in southwest of the Yazd city, central Iran. These deposits occur in granitoid intrusions, ranging in composition from quartz monzodiorite through granodiorite to granite. The ore‐hosting intrusions exhibit intense hydrofracturing that lead to the formation of quartz‐sulfide veinlets. Fluid inclusions in hydrothermal quartz in these deposits are classified as a mono‐phase vapor type (Type I), liquid‐rich two phase (liquid + vapor) type (Type IIA), vapor‐rich two phase (vapor + liquid) type (Type IIB), and multi‐phase (liquid + vapor + halite + sylvite + hematite + chalcopyrite and pyrite) type (Types III). Homogenization temperatures (Th) and salinity data are presented for fluid inclusions from hydrothermal quartz veinlets associated with potassic alteration and other varieties of hypogene mineralization. Ore precipitation occurred between 150° to >600°C from low to very high salinity (1.1–73.9 wt% NaCl equivalent) aqueous fluids. Two stages of hydrothermal activity characterized are recognized; one which shows relatively high Th and lower salinity fluid (Type IIIa; Th_(L‐V) > Tm_(NaCl)); and one which shows lower Th and higher salinity (Type IIIb; Th_(L‐V) < Tm_(NaCl)). The high Th_(L‐V) and salinities of Type IIIa inclusions are interpreted to represent the initial existence of a dense fluid of magmatic origin. The coexistence of Type IIIb, Type I and Type IIB fluid inclusions suggest that these inclusions resulted either from trapping of boiling fluids and/or represent two immiscible fluids. These processes probably occurred as the result of pressure fluctuations from lithostatic to hydrostatic conditions under a pressure of 200 to 300 bar. Dilution of these early fluids by meteoritic water resulted in lower temperatures and low to moderate salinity (<20 wt% NaCl equiv.) fluids (Type IIA). Fluid inclusion analysis reveals that the hydrothermal fluid, which formed mineralized quartz veinlets in the rocks with potassic alteration, had temperatures of ～500°C and salinity ～50 wt% NaCl equiv. Cryogenic SEM‐EDS analyses of frozen and decrepitated ore‐bearing fluids trapped in the inclusions indicate the fluids were dominated with NaCl, and KCl with minor CaCl₂.     

Application of number–size (N-S) fractal model for separation of mineralized zones in Dareh-Ashki gold deposit, Muteh Complex, Central Iran

The goal of this study is to separate different mineralized zones in Dareh-Ashki gold deposit located in Muteh Complex, Central Iran, by using number–size (N-S) fractal model. The N-S log–log plot shows seven geochemical populations and four Au-mineralized zones. Based on obtained results, Au thresholds are 0.17, 0.32, 6.3, and 12.6 ppm which represent weakly, moderately, highly, and extremely mineralized zones in terms of Au grades, respectively. Au values lower than 0.17 ppm illustrate wall rocks. Main mineralization stage of gold commences from 6.3 ppm in this deposit. The moderately mineralized zone with Au values between 0.32 and 6.3 ppm has occupied the biggest part of the studied deposit. However, highly (with Au values between 6.3 and 12.6 ppm) and extremely (higher than 12.6 ppm) mineralized zones have small extension. Correlation between geological model and results from N-S fractal model reveals that the gold mineralized zones specifically the moderately mineralized zone are situated in green schist units.