Application of Remote Sensing in Monitoring Unsustainable Wetlands: Case Study Hamun Wetland

Monitoring wetland as one of the important parts of the global ecosystem is necessary for conservational programs. But, usually, collecting in situ data is restricted in these areas because of their remote locations, vast area and dynamic conditions. Remote sensing provides a cost effective tool to investigate hydrological patterns and the seasonal trend of changes in wetlands. In this paper, Land-use/land-cover change during water inundation period of Hamun wetland was investigated in order to determine change trend during this period. Hamun wetland is an unsustainable ecosystem, and monitoring this wetland is essential for conservation goals. This trend is critical for decision makers in order to plan the conservational scheme in all unsustainable ecosystems. To reach this objective, the land-use/land-cover maps during inundation period of Hamun were produced using Landsat 8 time series images. The results of accuracy assessment showed the classification of water and vegetation have the highest accuracy (94% and 93%, respectively). And the accuracy of plants in the water classes was the lowest (water–veg?=?89.9%, veg–water 1?=?88.8%, veg–water 2?=?87.6%). This means the higher misclassification is in determining the vegetation in the water. Then, the changes in the land-cover classes in relation to wetland inundation were investigated. Results of land-use/land-cover change illustrate the regions that were suitable for water birds but lost their suitability when the wetland dried out. These areas are crucial for water bird’s conservation. Satellite data determined these areas with acceptable accuracy.     

Broadband seismic source data acquisition and processing to delineate iron oxide deposits in the Blötberget mine-central Sweden

A prototype electromagnetic vibrator, referred to here as E-Vib, was upgraded and developed for broadband hardrock and mineral exploration seismic surveys. We selected the iron oxide mine in Blötberget, central Sweden, for a test site in 2019 for the newly developed E-Vib because of the availability of earlier seismic datasets (from 2015 to 2016) for verification of its performance for hardrock imaging purposes. The two-dimensional data acquisition consisted of a fixed geometry with 550 receiver locations spaced at every 5 m, employing both cabled and wireless seismic recorders, along an approximately 2.7 km long profile. The E-Vib operated at every second receiver station (i.e. 10 m spacing) with a linear sweep of 2–180 Hz and with a peak force of 7 kN. The processing workflow took advantage of the broadband signal generated by the E-Vib in this challenging hardrock environment with varying ground conditions. The processed seismic section shows a set of reflections associated with the known iron oxide mineralization and a major crosscutting reflection interpreted to be from a fault system likely to be crosscutting the mineralization. The broadband source data acquisition and subsequent processing helped to improve signal quality and resolution in comparison with the earlier workflows and data where a drophammer seismic source was used as the seismic source. These results suggest new possibilities for the E-Vib source for improved targeting in hardrock geological settings.     

Mathematical modeling of competition for ammonium among Bacteria, Archaea and cyanobacteria within cyanobacterial mats: Can ammonia-oxidizers force nitrogen fixation?

Molecular analysis of cyanobacterial mat communities indicated that cyanobacteria, ammonia-oxidizing Archaea (AOA), and ammonia-oxidizing bacteria (AOB) coexist in those systems, competing for ammonium; this situation would imply competitive exclusion. We attempted to model how ammonia utilization niche partitioning occurs, and how ammonium levels can influence the interaction between those groups in a one-dimensional diffusionlimited system using Michaelis-Menten kinetics to describe ammonium consumption by each of those three groups. In our model, AOAs were able to dominate ammonium uptake by the community under most circumstances, except for unrealistically high (millimolar) levels of ammonium, where AOBs gained advantage. Cyanobacteria were unable to effectively compete for ammonium with either AOBs or AOAs throughout the mat at all ammonium concentrations and cell counts, suggesting that the presence of AOAs or AOBs forces cyanobacteria into nitrogen fixation mode. Such interaction can make cyanobacterial mats a net nitrogen source, as well as provide a carbon-independent energy transfer pathway from primary producers to the rest of the ecosystem.     

Application of first-arrival tomography to characterize a quick clay landslide site in Southwest Sweden

First-arrival traveltime tomography was applied to high-resolution seismic data acquired over a known quick-clay landslide scar near the Göta River in southwest Sweden in order to reveal the geometry and physical properties of clay-related normally consolidated sediments. Investigated area proved to be a challenging environment for tomographic imaging because of large P-wave velocity variations, ranging from 500 to 6000 m/s, and relatively steeply-dipping bedrock. Despite these challenges, P-wave velocity models were obtained down to ca. 150 m for two key 2D seismic profiles (each about 500-m long) intersecting over the landslide scar. The models portrait the sandwich-like structure of marine clays and coarse-grained consolidated sediments, but the estimated resolution (20 m) is too small to distinguish thin layers within this structure. Modelled velocity structures match well the results of reflection seismic processing and resistivity tomography available along the same profiles.     

A study of differentiation pattern and rare earth elements migration in geochemical and hydrogeochemical environments of Airekan and Cheshmeh Shotori areas (Central Iran)

The Airekan and Cheshmeh Shotori areas are located about 60 km northeast of Khour, in Isfahan province from Central Iran. Research on characteristics and rare earth elements (REE) pattern in hydrogeochemical environments of these areas suggests the same origin for the elements dissolved in groundwater in these areas. Investigation of migration pattern of REE in hydrogeochemical environments shows that the migration and transportation of REE has occurred through chloride complexes. REEs, leached by water/rock interaction from the Airekan granite, are transported by groundwater and then precipitated in the Cheshmeh Shotori area. Study of the Cheshmeh Shotori sediments shows the presence of a sequence of red oxidized and dark layers. Geochemical characteristics of these sediments reveal that their REE characteristics are mainly inherited from the Airekan granite. Changes in the REE pattern of these sediments with depth show that changes in oxidation and reduction process have not played a significant role in controlling their behavior. It is crucial to note that adsorption of REEs dissolved in water by hydrosilicate increases these elements in depth. The REE behavior shows water/rock interaction between the granitic rocks and groundwater as the main factor of solution, migration and precipitation of REEs in the Cheshmeh Shotori area.     

Optimization of Flue Gas Composition to Maximize Base Gas Replacement During UGS Process

Natural Resources Research - Base gas replacement by a cheap gas is one of the approved methods to reduce the cost of investment in underground gas storage process. Maximizing the amount of...     

Static and dynamic analysis on slope stability using a DFN-DEM approach on the right abutment of the Karun 4 dam

Uncertainty in input fracture geometric parameters during analysis of the stability of jointed rock slopes is inevitable and therefore the stochastic discrete fracture network (DFN) — distinct element method (DEM) is an efficient modeling tool. In this research, potentially unstable conditions are detected in the right abutment of the Karun 4 dam and downstream of the dam body as a case study. Two extreme states with small and relatively large block sizes are selected and a series of numerical DEM models are generated using a number of validated DFN models. Stability of the rock slope is assessed in both static and dynamic loading states. Based on the design basis earthquake (DBE) and maximum credible earthquake (MCE) expected in the dam site, histories of seismic waves are applied to analyze the stability of the slope in dynamic earthquake conditions. The results indicate that a MCE is likely to trigger sliding of rock blocks on the rock slope major joint. Furthermore, the dynamic analysis also shows a local block failure by the DBE, which can consequently lead to slope instability over the long term. According to the seismic behavior of the two models, larger blocks are prone to greater instability and are less safe against earthquakes.

     

Prediction of the median IDA curve by employing a limited number of ground motion records

A methodology has been proposed which can be used to reduce the number of ground motion records needed for the reliable prediction of the median seismic response of structures by means of incremental dynamic analysis (IDA). This methodology is presently limited to predictions of the median IDA curve only. The reduction in the number of ground motion records needed to predict the median IDA curve is achieved by introducing a precedence list of ground motion records. The determination of such a list is an optimization problem, which is solved in the paper by means of (1) a genetic algorithm and (2) a proposed simple procedure. The seismic response of a simple, computationally non‐demanding structural model has been used as input data for the optimization problem. The presented example is a three‐storey‐reinforced concrete building, subjected to two sets of ground motion records, one a free‐field set and the other a near‐field set. It is shown that the median IDA curves can be predicted with acceptable accuracy by employing only four ground motion records instead of the 24 or 30 records, which are the total number of ground motion records for the free‐field and near‐field sets, respectively. Copyright © 2007 John Wiley & Sons, Ltd.     

Potential of legacy 2D seismic data for deep targeting and structural imaging at the Neves–Corvo massive sulphide-bearing deposit,Portugal

Seismic methods are becoming an established choice for deep mineral exploration after being extensively tested and employed for the past two decades. To investigate whether the early European mineral-exploration datasets had potential for seismic imaging that was overlooked, we recovered a low-fold legacy seismic dataset from the Neves–Corvo mine site in the Iberian Pyrite Belt in southern Portugal. This dataset comprises six 4–6 km long profiles acquired in 1996 for deep targeting. Using today's industry-scale processing algorithms, the world-class, ca. 150 Mt, Lombador massive sulphide and other smaller deposits were better imaged. Additionally, we also reveal a number of shallow but steeply dipping reflections that were absent in the original processing results. This study highlights that legacy seismic data are valuable and should be revisited regularly to take advantage of new processing algorithms and the experiences gained from processing such data in hard-rock environments elsewhere. Remembering that an initial processing job in hard rock should always aim to first obtain an overall image of the subsurface and make reflections visible, and then subsequent goals of the workflow could be set to, for example understanding relative amplitude ratios. The imaging of the known mineralization implies that this survey could likely have been among one of the pioneer studies in the world that demonstrated the capability of directly imaging massive sulphide deposits using the seismic method.     

<Emphasis Type="Italic">3D</Emphasis> Modelling of Urban Area Using Synthetic Aperture Radar (SAR)

Synthetic aperture radar (SAR) is a newly-developed remote sensing technology that works in all weather and independent of daylight. Recent satellite designs such as TerraSAR-x, which have resolutions of a couple of meters and sub-meters, have provided appropriate data for modelling and monitoring of urban areas. Image classification and height information extraction is possible considering the nature of SAR data. In this paper, a proper classification method for high-resolution SAR images has been used in urban areas. This classifier is based on statistical models. First, statistical models that are well adapted to urban SAR images are selected. Initial labelling is performed using the maximum likelihood method. A method based on Markov random fields is applied to improve the results by considering neighbourhood information. Meanwhile, topographic information is extracted using the phase difference obtained from SAR interferometry. After classification and height extraction, the homogeneous regions consisting of locations with similar objects are determined. The homogeneous region adjacency graph are generated using vectors containing classification information, extracted objects, height of pixels forming each region, and information on the neighbouring areas. Height and classification information are then merged by assigning height conditions based on the nature of objects and optimizing an energy function. The results obtained, including buildings, streets, and corner reflectors, are easily recognizable. The overall accuracy is improved from 57% in the initial classification to 95% in the employed procedure. Moreover, the accuracy of height estimation is about 2.74 m, which is acceptable for height estimations of buildings with more than one floor.