Effect of Pozzolanic Reactivity on Compressibility Characteristics of Stabilised Low Lime Fly Ashes

This paper presents the effects of addition of lime and lime along with gypsum on the compressibility behavior of two class F fly ashes. Since the fly ashes develop strength and exhibit lower compression, consolidation testing with conventional duration of load increment may not be appropriate. Hence, an attempt has been made to assess the minimum duration of load increment necessary to study the compressibility characteristics of such materials. Thus compressibility behavior of fly ashes with additives has been studied using conventional consolidation test with different durations of load increments varying from 30 min to 48 h. The results obtained indicated that 30 min of duration of load increment can be used to assess the compressibility behavior of such materials. The effect of lime which reduces the compression is seen to be maximum from the results obtained with the duration of load increment of 30 min but gradually reduces with higher durations of load increment. It has also been observed that the rate of decrease in the compressibility is maximum up to 2.5% lime and gradual thereafter. The compressibility of lime treated fly ashes further reduces when gypsum is incorporated, the optimum gypsum percentage being 2.5. This reduction in the compressibility of fly ashes enhanced by incorporating lime and gypsum makes them versatile in the construction of embankments and for structural fills, particularly reducing the time required in between laying of each lift.     

Analysis of hydrobiological pattern in the Bizerte lagoon (Tunisia)

This study deals with the use of a multivariate analysis method in order to understand the functioning of the Bizerte lagoon ecosystem. A set of hydrobiological parameters was collected during 10 monthly campaigns in 2004. A variant of the EOF (Empirical Orthogonal Function) technique is used to examine hydrobiological variability modes in this lagoon. The permanent features characterising the lagoon are obtained by applying the EOF technique to data after removing the annual cycle. Two major modes were obtained. The first one shows a contrast between the northern sector of the lagoon, influenced by the Mediterranean Sea, and the southern one influenced by continental waters. This mode is mostly prominent for temperature and salinity. The second mode shows a contrast between shallow waters along the coastal zones and the deep central area of the lagoon. This contrast is more pronounced towards the southwestern edge of the lagoon, a region of important freshwater input from the Tinja channel, which drifts towards the downstream area of Menzel Bourguiba. This second mode may also correspond to northward water circulation under southerly wind blowing frequently in summer. The spatial and temporal variability in the lagoon is highlighted by applying the EOF to the raw data without removing the annual cycle. A weight series is obtained for each variable by extracting the corresponding data and then projecting them on the corresponding eigenvector. Using this technique, only one mode was found dominant with more than 52% of the total variance. It was also found that the north–south contrast of temperature, salinity and phosphorous and the coast-centre contrast of Chlorophyll a are enhanced in summer. Other variables such as ammonia and nitrate also show significant annual cycles but with local patterns.     

Halley and the London Queen Anne Churches

Edmond Halley's work on two London churches makes them the first buildings planned using modern scientific techniques, argue Jason R Ali and Peter Cunich.     

Bundelkhand mafic dykes, Central Indian Shield: Implications for the role of sediment subduction in Proterozoic crustal evolution

Abstract The Archean to Paleo–Proterozoic Bundelkhand massif basement of the central Indian shield has been dissected by numerous mafic dykes of Proterozoic age. These dykes are low‐Ti tholeiites, ranging in composition from subalkaline basalt through basaltic‐andesite to dacite. They are enriched in light rare earth elements (LREE), large ion lithophile elements (LILE) and depleted in high field strength elements (HFSE: Nb, P and Ti). Negative Sr anomaly is conspicuous. Nb/La ratios of the dykes are much lower compared with the primitive mantle, not much different from the average crustal values, but quite similar to those of continental and subduction related basaltic rocks. Bulk contamination of the mantle derived magma by crustal material is inadequate to explain the observed geochemical characteristics; instead contamination of the mantle/lithospheric source(s) via subduction of sediment is a better proposition. Thus, in addition to generating juvenile crust along the former island arcs, subduction processes appear to have influence on the development of enriched mantle/lithospheric source(s). The Bundelkhand massif basement is inferred to represent subduction related juvenile crust, that experienced lithospheric extension and rifting possibly in response to mantle plume activities. The latter probably supplied the required heat, material (fluids) and extensional environment to trigger melting in the refractory lithospheric source(s) and emplacement of the mafic dykes. Proterozoic mafic magmatic rocks from Bundelkhand, Aravalli, Singhbhum and Bastar regions of the Indian shield and those from the Garhwal region of the Lesser Himalaya display remarkably similar enriched incompatible trace elements characteristics, although limited chemical variations are observed in all these rocks. This may indicate the existence of a large magmatic province, different parts of which might have experienced similar petrogenetic processes and were probably derived from mantle/lithospheric source(s) with similar trace element characteristics. The minor, less enriched to depleted components of the Jharol Group of the Aravalli terrane and those from the Singhbhum terrane may represent protracted phases of rifting, that probably caused thinning and mobilization of the lithosphere, facilitating the eruption/emplacement of the asthenospheric melts (with N‐ to T‐types mid‐oceanic ridge basalts signatures) and deposition of deep water facies sediments in the younger developing oceanic basins. In contrast, Bundelkhand region did not experience such protracted rifting, although dyke swarms were emplaced and shallow water Bijawar Group and Vindhyan Supergroup sediments were deposited in continental rift basins. All these discrete Proterozoic terranes appear to have experienced similar petrogenetic processes, tectonomagmatic and possibly temporal evolution involving subduction processes, influencing the lithospheric source characteristics, followed by probably mantle plume induced ensialic rifting through to the development of oceanic basins in the Indian shield regions and their extension in the Lesser Himalaya.     

Neoproterozoic diamictite in the Eastern Desert of Egypt and Northern Saudi Arabia: evidence of ~750 Ma glaciation in the Arabian–Nubian Shield?

The Neoproterozoic Atud diamictite in Wadi Kareim and Wadi Mobarak in the Eastern Desert of Egypt and the Nuwaybah formation in NW Saudi Arabia consist of poorly sorted, polymictic breccia, with clasts up to 1 m of granitoid, quartz porphyry, quartzite, basalt, greywacke, marble, arkose, and microconglomerate in fine-grained matrix. Stratigraphic relations indicate that the diamictite was deposited in a marine environment. Integrated field investigation, petrographic study and U–Pb SHRIMP zircon ages demonstrate that the Atud and Nuwaybah are correlative. The distribution of zircon ages indicate that ~750 Ma ages are dominant with a significant component of older materials, characterized by minor Mesoproterozoic and more abundant Paleoproterozoic and Neoarchean ages. Some matrix and metasedimentary clast zircons yield ages that are a few 10s of Ma younger than the age of the youngest clast (754 ± 15 Ma), suggesting Atud/Nuwaybah diamictite deposition ~750 Ma or slightly later, broadly consistent with being deposited during the Sturtian glaciation (740–660 Ma). The Paleoproterozoic and Neoarchean clasts have no source within the ensimatic Arabian–Nubian Shield. The distribution of the pre-Neoproterozoic ages are similar to the distribution of the pre-Neoproterozoic ages in Yemen and Saharan Metacraton, suggesting that these clasts have been transported hundreds of kilometers, maybe by ice-rafting. The Atud diamictite may represent important evidence for Cryogenian “Snowball Earth” in the Arabian–Nubian Shield.     

Coupling effect of ozone column and atmospheric infrared sounder data reveal evidence of earthquake precursor phenomena of Bam earthquake,Iran

Understanding the source mechanism of earthquakes may be the key to predict earthquakes. The testing of radioactive radiations and reactionary hypothesis of gases before and after quake events can help predict and monitor earthquake occurrence. In this study, the Atmospheric Infrared Sounder (AIRS) and the column ozone (O₃) were applied to evaluate the December 26, 2003 earthquake of Bam city in western Iran. The results show that ozone concentration (column density) decreased about 30 DU and or 807?×?10E15/cm² molecules. Using high-resolution AIRS data for the study area, we were able to discriminate gases that formed and changed before the main shock at least a day before the occurrence of the quake in Bam.     

Removal of the Alphazurine FG Dye from Simulated Solution by Electrocoagulation

The removal of Alphazurine FG (AF) dye from water by an electrocoagulation process has been studied. The effect of some operational parameters, such as anode material, current density, initial dye concentration, pH of solution, conductivity, and inter‐electrode distance, on the removal efficiency was investigated. Iron and aluminum were used as anodes in the electrocoagulation cell. It was found that the efficiency of the iron anode was better than that of the aluminum anode for AF removal. The factors that affected the removal efficiency were the current density and the initial dye concentration. The removal efficiency increased from about 35% at 25 A m^–2 to about 97% at 100 A m^–2, during 4 min of electrocoagulation. The results exhibited pseudo‐first‐order kinetics for AF removal by electrocoagulation. In addition, a mathematical model was successfully established for predicting the removal efficiency. A comparison between the model results and experimental data gave a high correlation coefficient (R² = 0.9925), which indicates that the model is able to predict the removal efficiency of AF.     

Mineralogical and spectroscopic characterization,and potential environmental use of limestone from the Abiod formation,Tunisia

Limestone beds of the Late Cretaceous Abiod formation (Campanian-Maastrichtian system) are fundamentally important for the economic growth of the raw material sector in Tunisia. However, little attention has been paid to the detailed physical and chemical properties of the Abiod limestone. Nine limestone samples collected from the Abiod formation outcropping in the areas of Bizerte, Gafsa and Gabes, Tunisia, as well as their separated clay fractions, were characterized using different techniques, such as XRF, XRD, FTIR and TG/DTA. XRF showed the chemical composition of the limestone in which calcium carbonate was the main constituent, and silica, iron and magnesium were the impurities. XRD also confirmed the presence of small amounts of clay minerals and quartz along with sharp peaks of calcite. FTIR spectra indicated that the limestone was mainly composed of CaCO₃ in the form of calcite, as identified by its main characteristic absorption bands. These data were in agreement with XRD and XRF analysis data. The TG/DTA curves of the limestone samples, showing a close similarity to that of pure calcium carbonate, exhibited an endothermic peak between 600 and 760°C, with the maximum near 750°C. Moreover, FTIR spectra of clay fraction samples indicated high silica content in some samples. Especially the samples SD1 and SD2 collected in the northern area showed higher amounts of silica compared with those of AS1, AS2, CHB, ZNC, SND, MKM and GBS collected from southern districts. However, among the latter seven samples, one could recognize two groups based on the clay mineral investigations: (1) limestone with minor amounts of smectite and mixed layer minerals of smectite/illite (AS1 and 2, CHB, ZNC, SND and GBS) and (2) limestone with smectite, kaolinite and apatite (SND and MKM). Differences in these mineralogical and chemical characteristics should be considered when limestone from the Abiod formation is utilized as a medium for heavy metal removal from wastewater.     

Evaluating the effectiveness of bank infiltration process in new Aswan City, Egypt

Riverbank filtration (RBF) is an efficient and low-cost natural alternative technology for water supply application in which surface water contaminants are removed or degraded as the infiltrating water moves from the river to the pumping wells. In this study, a full-scale RBF site consisting of three vertical wells installed 50 m from Nile bank was investigated. The RBF systems are particularly well suited for providing better water quality than withdrawal directly from the Nile River to produce drinking water for New Aswan city. The study is carried out by taking samples over 1 year from riverbank filtrates wells, Nile River (as induced surface water), and some production wells were collected and analyzed. Physicochemical and microbiological measurements such as turbidity, dissolved oxygen, total suspended solids, total organic carbon, total dissolved solids, electrical conductivity, pH, Fe, Mn, NH₃, NO₂, NO₃, PO₄, Ca, Mg, Na, K, HCO₃, SO₄, Cl, total bacteria, and total coliform were carried out. The results of bank filtrate were compared with those of the natural groundwater and previous reported Nile water. Chemical and bacterial quality parameters of RBF are under the allowable limits for drinking water. Moreover, bank filtration is simultaneously improved the ambient groundwater and cleaned Nile water in the studied area. Result of this full-scale RBF plant showed the effectiveness of riverbank filtration as a proven treatment technique in Nile Valley with a fraction of cost comparing to conventional surface treatment plants.     

Sensitivity Analysis of Selected Input Parameters for an Advanced Constitutive Model

Experimental results and simulated behavior of a medium plasticity clay were compared to investigate the performance of an advanced soil constitutive model. The soil model employed for this study was the 3-SKH model. The performance of this model was compared to the performance of two other critical state models; the Cam Clay (CC) and Modified Cam Clay (MCC) models. In addition, the influences of some of the input parameters on the performance of the 3-SKH model were investigated by performing sensitivity analyses. The comparisons demonstrated that the CC model was able to predict normally consolidated compressive behavior of the remolded medium plasticity clay. The compression behavior of overconsolidated clay was better captured by both the 3-SKH and CC models. For extension behavior of the normally consolidated samples, the MCC model performed better than the CC and 3-SKH models in predicting the stress path. The 3-SKH model was found to be very sensitive to varying the exponent in the hardening function. In particular, a difference between the evaluated values as small as 0.01 had a noticeable effect on the predicted stress–strain values for the overconsolidated compression and extension samples.