The origin of mafic rocks in the Naqadeh intrusive complex, Sanandaj-Sirjan Zone, NW Iran

The Naqadeh mafic plutonic rocks are located on a plutonic assemblage and include different granitoid rocks related to ～40 Ma. U-Pb SHRIMP data shows different ages of 96?±?2.3 Ma for mafic rocks. Naqadeh mafic plutonic rocks consist of diorite to diorite-gabbros with relatively high contents of incompatible elements, low Na2O, and $ {\hbox{Mg\# }} = \left[ {{\hbox{molar}}\;{100} \times {\hbox{MgO/}}\left( {{\hbox{MgO}} + {\hbox{FeO}}} \right)} \right] > 44.0 $ . These features suggest that the Naqadeh mafic rocks originate from enriched lithospheric mantle above subducted slab during Neotethys subduction under Iranian plate.     

Uncertainties in Grout Penetrability Measurements; Evaluation and Comparison of Filter pump,Penetrability Meter and Short Slot

To measure grout penetrability in fractured hard rock, various measuring instruments have been developed over the years. Penetrability meter and Filter pump have been designed to use in both the lab and the field. Short slot has been applicable mainly in the lab due to its complexity. The fact, that these instruments have been built based on different assumptions, limitations, and test conditions, makes their results occasionally in contradict. Deficiency in design of the instruments as well as the methods of evaluating grout penetrability is additionally a basis for uncertainty in results. This study is an experimental effort to determine and thoroughly perceive the nature of the most governing uncertainties in grout penetrability measurements. The test apparatus, procedure, and method used to evaluate the grout penetrability in both Penetrability meter and Filter pump were thus modified. The aim was to control the corresponding uncertainties and make their limitations and test conditions as similar as possible with the ones in Short slot. The results suggested that to obtain a more realistic evaluation of the grout penetrability, measurement should be accomplished at both the high and the low pressures with sufficient grout volume using Short slot. Moreover, application of both Filter pump and Penetrability meter is no longer recommended due to the revealed uncertainties.     

Investigation of monotonic and cyclic behavior of sand using a bounding surface plasticity model

Developing the pore water pressures in loose to medium sands below the water table may lead to liquefaction during earthquakes. The simulation of liquefaction (cyclic mobility and flow liquefaction) in sandy soils is one of the major challenges in constitutive modeling of soils. This paper presents the simulation of sand behavior using a critical state bounding surface plasticity model (Dafalias and Manzari’s model, 2004) during monotonic and cyclic loading. The drained, undrained, and cyclic triaxial tests were simulated using Dafalias and Manzari’s model. The simulation results showed that the model predicts behavior of sand, reasonably well. Also, for CSR?<?0.2, number of cycles for liquefaction is significantly increased. The residual strength of Babolsar sand is produced when it is deformed to an axial strain of 20 to 25%.     

Evaluating the production and bio-stimulating effect of 5-methyl 1, hydroxy phenazine on microbial fuel cell performance

The role of endogenous redox mediators has considerable importance in electron shuttling reactions and associated performance of microbial fuel cell. Single-chamber microbial fuel cell-II with dual air-cathode assembly (area = 18.84 cm²) supported highest bacterial (Pseudomonas aeruginosa) density (6.7 × 10⁹) and active biomass [4.4 ± 0.3 mg cm^?2 (carbon content = 0.48 ± 0.1 mg cm^?2)] on anode thereby resulting in maximum production of redox metabolite, 5-methyl 1, hydroxy phenazine (301 ppm) and voltage (595 ± 5 mV) than similar cells with relatively less surface area of cathode. It was further revealed that 5-methyl 1, hydroxy phenazine production was positively correlated with chemical oxygen demand removal rate (77 ± 2.5%) and power generation (66.6 ± 2.2 mW cm^?2) efficiency of single-chamber microbial fuel cell-II. Maximum power density of 258 ± 4.5 mW cm^?2 was generated when reactor was supplemented with 2 ml crude extract of 5-methyl 1, hydroxy phenazine metabolite, whereas power output was about 229 ± 2.5 mW cm^?2 when reactor was bio-stimulated with 1 ml pure extract of 5-methyl 1, hydroxy phenazine. With this concentration, the electrochemical response of mixed culture biofilm (sediment) was enhanced by 99.3%. However, further increase in concentration of endogenous mediator proved to be limiting on reactor performance. Pyrosequencing and phylogenetic analysis on the basis of partial 16S rRNA sequences demonstrated both culturable and unculturable bacterial species in anodic biofilm and relative abundance of family Pseudomonadaceae was found to be maximum, i.e., 61.7% followed by Rhodocyclaceae 19.2%, Xanthomonadaceae 6.3% and Opitutaceae 3.18%.     

Investigation of surface and subsurface displacements due to multiple tunnels excavation in urban area

Underground structures are currently widely used and are built as urbanism develops. The interactions between perpendicularly crossing and parallel tunnels in the Tehran region are investigated by using a full three-dimensional (3D) finite difference analysis with elastic-plastic material models. Special attention is paid to the effect of subsequent tunneling on the support system, i.e., the shotcrete lining and rock bolts of the existing tunnel. Eventually, as the tunnels are excavated at certain levels, the interaction between the tunnels will certainly have a significant influence on both stress distribution and consequently deformations. Since multilayer tunneling is a three-dimensional phenomenon in nature, 3D numerical solutions must be utilized for analyzing effect of perpendicularly crossing tunnels at various levels. As Tohid twin tunnels and Line 7 pass beneath the Line 4 metro tunnel, changes in stress distribution, deformations, and surface settlements are studied for various conditions and the results are presented in this paper. Consequently, it is shown that there is a significant interaction between tunnels that necessitate certain preventive measures to maintain a stable tunneling operation.     

Behavior of Shallow Strip Footing on Twin Voids

This paper numerically examines the bearing capacity and failure mechanism of a shallow strip foundation constructed above twin voids. The voids may refer to caves, caverns, underground aqueduct or tunnels due to water seepage, chemical reaction or deliberately excavated in soil deposit. The ability of numerical model to accurately predict the system behavior is evaluated by performing verification analyses on existing researches. Subsequently, a parametric study carried out to reveal the influence of size of footing/voids and their location (i.e. depth, spacing, eccentricity) on the bearing capacity of footing. To clarify the failure mechanism, the distribution of shear strain in the soil for different scenarios is assessed. The parametric study provided a new framework to determine the bearing capacity and the mode of failure for footings on voids. Based on the results, a criterion can be issued to avoid collapse of footing/voids regarding the shape, location and size of voids. The results can also be used to design construction of a footing on existing voids while the acquired failure mechanisms can be appointed to develop analytical solutions for this problem. Results demonstrated that a critical depth for voids and a critical distance between them exist where the influence on the ultimate bearing capacity of footing disappears.     

The depositional environment of Mauddud limestone,Greater Burgan oil field,Kuwait

Six microfacies are defined on quantitative petrographic data in a carbonate/clastic sequence from the subsurface, oil producing Mauddud Formation of early Middle Cretaceous age. These are, in descending order of importance and abundance: (1) biomicritic wackestone-packstone, (2) argillaceous mudstone, (3) micritic mudstone, (4) glauconitic sandstone, (5)Orhitolina pelsparitic grainstone, and (6) argillaceous dolomite.Sedimentation took place during a marine transgression onto a very shallow, intertidal, restricted marine shelf lagoons. Facies variations appear to be related to depth and energy changes and proximity to areas of clastic deposition. These changes may have been controlled by slight tectonic events in the hinterland and changes in the rate of basin subsidence.

---

Zusammenfassung Auf der Grundlage quantitativer petrographischer Daten werden sechs Mikrofazies in einer karbonat/klastischen Folge aus der unter der ErdoberflÄche liegenden, ölliefernden Mauddud-Formation der frühen Mittelkreide definiert. In absteigender Reihenfolge der Bedeutung und HÄufigkeit sind dieses: (1) biomikritischer wackestone-packstone, (2) toniger Schlickstein, (3) unkritischer Schlickstein, (4) glaukonitischer Sandstein, (5) Orbitolina-führender pelsparitischer Grainstone und (6) toniger Dolomit.Die Sedimentation erfolgte wÄhrend einer marinen Transgression auf sehr flache, intertidale Lagunen eines begrenzten marinen Schelfs. Die Fazies-Variationen scheinen mit den Wechseln in Wassertiefe und Energie sowie der mit NÄhe von Gebieten mit klastischer Sedimentation zusammenzuhÄngen.Diese Wechsel könnten durch kleinere tektonische Ereignisse im Hinterland und durch VerÄnderungen der Absenkungsrate des Beckens ausgelöst worden sein.

---

Résumé Des données pétrographiques quantitatives permettent de définir six microfacies dans une série clasto-carbonatée d'âge crétacé inférieur du sous-sol de la région pé trolifère de Mauddud. Ce sont par ordre décroissant d'importance et d'abondance: (1) des wacstones-pacstone biomicritiques; (2) des argilites; (3) des argilites micritiques; (4) des grès glauconitiques; (5) des grainstone pelsparitiques à orbitolines; (6) des dolomies argileuses.La sédimentation se produisit au cours d'une transgression marine dans des lagunes très plates, intercotidales, d'une plate-forme continentale de faible étendue. Les variations de facies semblent Être dues à des changements de profondeur et d'énergie, ainsi qu'à la proximité de régions à sédimentation clastique.Ces changements pourraient résulter de légers mouvements tectoniques dans l'arrière-pays et de variations dans le degré de subsidence du bassin de sédimentation.

---

- Mauddud, ( ). : 1) ; 2) ; 3) ; 4) ; 5) , 6) . , . , , , . , .

     

A method of alternating characteristics with application to advection-dominated environmental systems

We present a numerical method for solving a class of systems of partial differential equations (PDEs) that arises in modeling environmental processes undergoing advection and biogeochemical reactions. The salient feature of these PDEs is that all partial derivatives appear in linear expressions. As a result, the system can be viewed as a set of ordinary differential equations (ODEs), albeit each one along a different characteristic. The method then consists of alternating between equations and integrating each one step-wise along its own characteristic, thus creating a customized grid on which solutions are computed. Since the solutions of such PDEs are generally smoother along their characteristics, the method offers the potential of using larger time steps while maintaining accuracy and reducing numerical dispersion. The advantages in efficiency and accuracy of the proposed method are demonstrated in two illustrative examples that simulate depth-resolved reactive transport and soil carbon cycling.     

Pore-water pressure development in a frozen saline clay under isotropic loading and undrained shearing

Acta Geotechnica - A systematical testing program on frozen Onsøy clay under isotropic loading and undrained shearing at different temperatures...