<Emphasis Type="Italic">H-M</Emphasis> bearing capacity of a modified suction caisson determined by using load-/displacement-controlled methods

This paper presents a series of monotonically combined lateral loading tests to investigate the bearing capacity of the MSCs (modified suction caissons) in the saturated marine fine sand. The lateral loads were applied under load- and displacement-controlled methods at the loading eccentricity ratios of 1.5, 2.0 and 2.5. Results show that, in the displacement-controlled test, the deflection-softening behavior of load-deflection curves for MSCs was observed, and the softening degree of the load-deflection response increased with the increasing external skirt length or the decreasing loading eccentricity. It was also found that the rotation center of the MSC at failure determined by the load-controlled method is slightly lower than that by the displacement-controlled method. The calculated MSC capacity based on the rotation center position in serviceability limit state is relatively conservative, compared with the calculated capacity based on the rotation center position in the ultimate limit state. In the limit state, the passive earth pressures opposite the loading direction under load- and displacement-controlled methods decrease by 46% and 74% corresponding to peak values, respectively; however, the passive earth pressures in the loading direction at failure only decrease by approximately 3% and 7%, compared with their peak values.     

On the fairing of resistance test data: A software-based approach

A fairing method is presented for giving a good representation of ship model resistance test data, which in general tend to exhibit a scattered trend and need to be smoothed appropriately. One component of the test data originates from the frictional resistance and can be formulated smoothly. The second component is the wave resistance which exhibits a specific harmonic character with peaks and troughs. In this method, this component is modelled using suitable harmonic cosine terms for obtaining the best representation of the corresponding resistance data. The performance of the method is then tested on two example cases, using the characteristic parameters of the sample data as input during the smoothing process.     

Composition, porosity, and reservoir potential of the Middle Jurassic Kashafrud Formation, northeast Iran

In the Kopet-Dagh Basin of Iran, deep-sea sandstones and shales of the Middle Jurassic Kashafrud Formation are disconformably overlain by hydrocarbon-bearing carbonates of Upper Jurassic and Cretaceous age. To explore the reservoir potential of the sandstones, we studied their burial history using more than 500 thin sections, supplemented by heavy mineral analysis, microprobe analysis, porosity and permeability determination, and vitrinite reflectance.The sandstones are arkosic and lithic arenites, rich in sedimentary and volcanic rock fragments. Quartz overgrowths and pore-filling carbonate cements (calcite, dolomite, siderite and ankerite) occluded most of the porosity during early to deep burial, assisted by early compaction that improved packing and fractured quartz grains. Iron oxides are prominent as alteration products of framework grains, probably reflecting source-area weathering prior to deposition, and locally as pore fills. Minor cements include pore-filling clays, pyrite, authigenic albite and K-feldspar, and barite. Existing porosity is secondary, resulting largely from dissolution of feldspars, micas, and rock fragments, with some fracture porosity. Porosity and permeability of six samples averages 3.2% and 0.0023 mD, respectively, and 150 thin-section point counts averaged 2.7% porosity. Reflectance of vitrinite in eight sandstone samples yielded values of 0.64-0.83%, in the early mature to mature stage of hydrocarbon generation, within the oil window.Kashafrud Formation petrographic trends were compared with trends from first-cycle basins elsewhere in the world. Inferred burial conditions accord with the maturation data, suggesting only a moderate thermal regime during burial. Some fractures, iron oxide cements, and dissolution may reflect Cenozoic tectonism and uplift that created the Kopet-Dagh Mountains. The low porosity and permeability levels of Kashafrud Formation sandstones suggest only a modest reservoir potential. For such tight sandstones, fractures may enhance the reservoir potential.     

Present environmental status of Al-Kharrar Lagoon,central of the eastern Red Sea coast,Saudi Arabia

Al-Kharrar Lagoon is a fossil back-reef basin with hypersaline waters, situated 10 km northwest of Rabigh city, central of the eastern Red Sea coast, Saudi Arabia. About 130 stations were selected for measurements of the lagoon’s water temperature, salinity, pH, dissolved oxygen, and water depths during March 2014. The common macro-algae, flora, and fauna were also sampled and identified. The present study aims to investigate the prevailing environmental parameters and their impact on the macro-fauna/flora of the lagoon. The average water depth of the lagoon was around 5 m and reached maximum values of 8 and 16 at the lagoon centre and inlet, respectively. The results showed that the lagoon’s surface water temperature and salinity have mean values of 25 °C and 40‰, but with extreme values of 30 °C and 45‰ that occurred only at the enclosed intertidal areas, respectively. Their dissolved oxygen (DO) and pH were 6.5 mg/l and 8.3, respectively and the latter showing the highest values up to 8.5 in the intertidal areas dominated by the green cyanobacteria. These physicochemical conditions make the lagoon as a favorite place for the mangrove Avicennia marina, macro-algae, seagrasses (Halophila stipulacea and Cymodocea rotundata), and algal mats (Cyanobacteria) which dominate the intertidal and supratidal areas of the lagoon, tolerating extremely high-salinity and high-temperature conditions. On the other hand, corals were observed alive at the southern part of the lagoon, immediately south of the Al-Ultah Islet. Vertical profiles of temperature, salinity, and density in the lagoon’s water indicated that the water column consists of two layers throughout the year.     

Spatial analysis of water quality and its suitability in farming giant freshwater prawn (Macrobrachium rosenbergii) in Negeri Sembilan region,Peninsular Malaysia

Finding potential sites for resilient prawn production in the tropical environment that also prevents wastage of natural resources is not an easy task. The purpose of this study is to evaluate water quality suitability for prawn farming in Negeri Sembilan of Peninsular Malaysia based on Geographic Information System (GIS). To achieve this goal, numerous criteria including sources of water, water temperature, water pH, sources of pollution, salinity, soil texture and availability of phytoplankton criteria were considered for the modelling process. Analytic Hierarchy Process (AHP) technique was performed to standardize the criteria and the weighting process. The weighted overlay of indicators and results were accomplished by applying the Multi‐Criteria Decision Analysis (MCDA) method in GIS. It was indicated that the Negeri Sembilan area has potential for prawn farming. The results showed that about 25 per cent (163 056.93 ha) of the area was most suitable for prawn farming, about 58 per cent (384 656.88 ha) was considered moderately suitable, while 18 per cent (117 633.49 ha) was regarded as least suitable. The study concluded that the multi‐criteria decision analysis of water quality for prawn farming is vital for regional economic planning in the Negeri Sembilan area and also significant when establishing a model for aquaculture development.     

Context-aware abstraction and generalization of street networks: two cognitively engineered user-oriented approaches using network Voronoi diagrams

Generalization and spatial contextual awareness are prevalent concepts in geographic information systems. This study adopted a context-dependent user-centred network generalization method to create a sub-network for optimal route finding. The results show an increase in the number of preferred traversed edges. A route presentation approach is suggested that is based on cognitively engineered user-oriented abstraction of street network. Successive abstractions hierarchize the street network to create a hierarchical presentation structure. The route is projected onto one level in the structure. Then, instead of showing the exact route, the network Voronoi regions represented by the projected route are shown. Experience indicates that the suggested method is an efficient way of route presentation for a hierarchical regionalized structure of a human cognitive map.     

Leachability of trace elements from two stabilized low lime Indian fly ashes

Fly ash is a waste by-product obtained from the burning of coal by thermal power plants for generating electricity. When bulk quantities are involved, in order to arrest the fugitive dust, it is stored wet rather than dry. Fly ash contains trace concentrations of heavy metals and other substances in sufficient quantities to be able to leach out over a period of time. In this study an attempt was made to study the leachabilities of a few selected trace metals: Cd, Cu, Cr, Mn, Pb and Zn from two different types of class F fly ashes. Emphasis is also laid on developing an alternative in order to arrest the relative leachabilities of heavy metals after amending them with suitable additives. A standard laboratory leaching test for combustion residues has been employed to study the leachabilities of these trace elements as a function of liquid to solid ratio and pH. The leachability tests were conducted on powdered fly ash samples before and after amending them suitably with the matrices lime and gypsum; they were compacted to their respective proctor densities and cured for periods of 28 and 180 days. A marked reduction in the relative leachabilities of the trace elements was observed to be present at the end of 28 days. These relative leachability values further reduced marginally when tests were performed at the end of 180 days.     

The potassium abundance in the solar photosphere

High precision center-limb spectrograms of the K i resonance doublet line at λ 7699 Å were used to study the line formation and to determine the abundance of potassium in the solar atmosphere. The LTE assumption is not valid for these lines. Synthetic profiles computed in NLTE reproduce very well the observed center-limb line behaviour and yield log? _K = 5.14±0.10 for the solar abundance of potassium (on the scale of log? _H = 12 for Hydrogen).     

Geological and geophysical investigation of Kamil crater,Egypt

Abstract– We detail the Kamil crater (Egypt) structure and refine the impact scenario, based on the geological and geophysical data collected during our first expedition in February 2010. Kamil Crater is a model for terrestrial small‐scale hypervelocity impact craters. It is an exceptionally well‐preserved, simple crater with a diameter of 45 m, depth of 10 m, and rayed pattern of bright ejecta. It occurs in a simple geological context: flat, rocky desert surface, and target rocks comprising subhorizontally layered sandstones. The high depth‐to‐diameter ratio of the transient crater, its concave, yet asymmetric, bottom, and the fact that Kamil Crater is not part of a crater field confirm that it formed by the impact of a single iron mass (or a tight cluster of fragments) that fragmented upon hypervelocity impact with the ground. The circular crater shape and asymmetries in ejecta and shrapnel distributions coherently indicate a direction of incidence from the NW and an impact angle of approximately 30 to 45°. Newly identified asymmetries, including the off‐center bottom of the transient crater floor downrange, maximum overturning of target rocks along the impact direction, and lower crater rim elevation downrange, may be diagnostic of oblique impacts in well‐preserved craters. Geomagnetic data reveal no buried individual impactor masses >100 kg and suggest that the total mass of the buried shrapnel >100 g is approximately 1050–1700 kg. Based on this mass value plus that of shrapnel >10 g identified earlier on the surface during systematic search, the new estimate of the minimum projectile mass is approximately 5 t.