Observations of Giant Pulses of the Crab Pulsar

The Crab Pulsar was observed at 1540 MHz with the 25m radio telescope at Urumqi with a filterbank de-dispersion backend. A total of 2436 giant pulses with pulse energies larger than 4300 Jy μs were detected in two observing sets. All of these giant pulses are located in the main pulse (MP) and inter pulse (IP) windows of the average profile of the Crab Pulsar. The ratio of the numbers of giant pulses detected in the IP and MP windows is about 0.05. Our results show that, at 1540 MHz, the emission in the IP is contributed by giant and normal pulses, while that in the MP is almost dominated by giant pulses. The distribution of energy of the 2436 giant pulses at 1540 MHz can be described by a power-law with index α=3.13±0.09. The intrinsic threshold of giant pulse energy in the MP window is about 1400 Jy μs at 1540 MHz.     

Coherent integration time limit of a mobile receiver for indoor GNSS applications

There is an emerging requirement for processing global navigation satellite system (GNSS) signals indoor where the signal is very weak and subjected to spatial fading. Typically, longer coherent integration intervals provide the additional processing gain required for the detection and processing of such weak signals. However, the arbitrary physical motion of the handset imputed by the user limits the effectiveness of longer coherent integration intervals due to the spatial decorrelation of the multipath-faded GNSS signal. In this paper, limits of coherent integration due to spatial decorrelation are derived and corroborated with experimental verification. A general result is that the processing gain resulting from direct coherent integration saturates after the antenna has moved through a certain distance, which for typical indoor propagation, is about half a carrier wavelength. However, a refined Doppler search coupled with a prolonged coherent integration interval extends this limit, which is effectively a manifestation of selective diversity.     

Effect of Drain Pipes on Uplift Force and Exit Hydraulic Gradient and the Design of Gravity Dams Using the Finite Element Method

Geotechnical and Geological Engineering - The effects of diameter and location of drain pipes on the uplift force and exit hydraulic gradient for a gravity dam are investigated. A numerical model...     

Estimation of crowd density from UAVs images based on corner detection procedures and clustering analysis

With rapid developments in platforms and sensors technology in terms of digital cameras and video recordings, crowd monitoring has taken a considerable attentions in many disciplines such as psychology, sociology, engineering, and computer vision. This is due to the fact that, monitoring of the crowd is necessary to enhance safety and controllable movements to minimize the risk particularly in highly crowded incidents (e.g. sports). One of the platforms that have been extensively employed in crowd monitoring is unmanned aerial vehicles (UAVs), because UAVs have the capability to acquiring fast, low costs, high-resolution and real-time images over crowd areas. In addition, geo-referenced images can also be provided through integration of on-board positioning sensors (e.g. GPS/IMU) with vision sensors (digital cameras and laser scanner). In this paper, a new testing procedure based on feature from accelerated segment test (FAST) algorithms is introduced to detect the crowd features from UAV images taken from different camera orientations and positions. The proposed test started with converting a circle of 16 pixels surrounding the center pixel into a vector and sorting it in ascending/descending order. A single pixel which takes the ranking number 9 (for FAST-9) or 12 (for FAST-12) was then compared with the center pixel. Accuracy assessment in terms of completeness and correctness was used to assess the performance of the new testing procedure before and after filtering the crowd features. The results show that the proposed algorithms are able to extract crowd features from different UAV images. Overall, the values of Completeness range from 55 to 70 % whereas the range of correctness values was 91 to 94 %.     

Production of the Crab Elamenopsis kempiHymenosomatidae in the Garmat-Ali Region, Basrah, Iraq

Abstract. The production of the hymenosomatid crab Elamenopsis kempi was calculated for a period of 18 months from a subtidal area of the Garmat-Ali river, southern Iraq. The highest average individual somatic energy was attained in spring. Maximum population biomass and production were attained by the summer cohort and the minimum values were exhibited by the overwintering cohort. The fluctuations of the average population biomass were followed throughout the sampling period. Average total annual population production was 13.2 g DW · m^-2· a^-1 and the P/B ratio was 5.9. These values were compared with those of the most common crustaceans in the region.     

Numerical Modeling of Tropical Cyclone-Induced Storm Surge in the Gulf of Oman Using a Storm Surge–Wave–Tide Coupled Model

Ocean Science Journal - A storm surge is a complex phenomenon in which current, tide, and waves interact with each other. Even if the wind is the main force of driving the surge, waves and tide are...     

Interannual Variation of Eddy Kinetic Energy from TOPEX Altimeter Observations

Monthly mesoscale eddy kinetic energy (EKE) per unit mass has been computed for four years, 1993-1996, from TOPEX altimeter data in the Indian Ocean. It ranges from 50 cm²/s² to 2,700 cm²/s² (about 4,000 cm²/s² near the Somali region in a few months). In the Arabian Sea and the Bay of Bengal, regions of high energies associated with various current systems under the influence of monsoonal winds have been delineated. Monthly variation of EKE near the Somali region has been studied. In this region the maximum EKE per unit mass has been observed during August every year, with variations in magnitude from year to year. The mesoscale eddy kinetic energy computed from TOPEX altimeter-derived SSH during 1993-1996 is highest near the Somali region during the SW monsoon, due to formation of mesoscale eddies and also because of upwelling. In the Bay of Bengal, high eddy kinetic energy is seen toward the western side during nonmonsoonal months due to the western boundary current. In the South Indian Ocean, it is high at a few places in some of the months. A large part of the Indian Ocean exhibits low eddy kinetic energy (less than 300 cm²/s²) year-round.     

Prediction of riverine suspended sediment discharge using fuzzy logic algorithms, and some implications for estuarine settings

The ability of fuzzy logic algorithms to model relationships between stream flow and suspended sediment discharge was investigated using daily measurements of stream flow and suspended sediment discharge for the Escanaba River mouth station, situated on the shore of Lake Michigan and operated by the US Geological Survey. Three different configurations of inputs were applied, whereby the inputs were fuzzified into fuzzy subsets of variables by means of triangular membership functions. The relationships between inputs and suspended sediment discharge (output) were represented by a set of fuzzy rule expressed in IF–THEN format. The weighted average method served for defuzzification. The commonly used sediment rating curve was also applied to the data, and its performance compared with that of the three models by means of statistical analyses. For all three models, suspended sediment discharge predicted by the fuzzy logic algorithm was in satisfactory agreement with observations. Furthermore, the fuzzy logic algorithms performed better than the sediment rating curve, particularly at higher rates of suspended sediment discharge (in this study, more than 50  × 10⁶ g/day). Considered collectively, the use of fuzzy logic algorithms is suggested as a simple and effective approach for better prediction of suspended sediment discharge, also for estuaries.     

On the fairing of resistance test data: A software-based approach

A fairing method is presented for giving a good representation of ship model resistance test data, which in general tend to exhibit a scattered trend and need to be smoothed appropriately. One component of the test data originates from the frictional resistance and can be formulated smoothly. The second component is the wave resistance which exhibits a specific harmonic character with peaks and troughs. In this method, this component is modelled using suitable harmonic cosine terms for obtaining the best representation of the corresponding resistance data. The performance of the method is then tested on two example cases, using the characteristic parameters of the sample data as input during the smoothing process.     

Investigation on the Effect of Geometrical and Geotechnical Parameters on Elongated Offshore Piles Using Fuzzy Inference Systems

Among numerous offshore structures used in oil extraction, jacket platforms are still the most favorable ones in shallow waters. In such structures, log piles are used to pin the substructure of the platform to the seabed. The pile’s geometrical and geotechnical properties are considered as the main parameters in designing these structures. In this study, ANSYS was used as the FE modeling software to study the geometrical and geotechnical properties of the offshore piles and their effects on supporting jacket platforms. For this purpose, the FE analysis has been done to provide the preliminary data for the fuzzy-logic post-process. The resulting data were implemented to create Fuzzy Inference System (FIS) classifications. The resultant data of the sensitivity analysis suggested that the orientation degree is the main factor in the pile’s geometrical behavior because piles which had the optimal operational degree of about 5° are more sustained. Finally, the results showed that the related fuzzified data supported the FE model and provided an insight for extended offshore pile designs.