Valuation of socio-economic indicators for progressing urban sustainability under distinctive rubrics

The key objective of the study is to collect the factors which play an important role in the city's sustainability and implementation advantages for the development of cities in future. This article develops an urban sustainability assessment framework by giving GIS-based decision support tools to guide cities toward sustainability. Multicriteria analysis was used as the decision support system and provides an analytical framework for assessing differences in the level of criteria and ranking decision options. It has the capability for assessment of urban sustainability because it brings sustainability criteria from three pillars of sustainability, environmental, social, and economic, which provide an integrated approach for assessment of urban sustainability. The GIS-based multicriteria analysis serves as a sustainability support system that maps urban sustainability and the underlying environmental, social, and economic conditions. The results from the study show that the four cities - Faisalabad, Lahore, Gujranwala, and Multan - have better economic conditions while only Lahore and Faisalabad showed social progress and the remaining cities showed less suitability. For the environmental index, none of the cities attained high suitability. Lahore, Faisalabad, and Rawalpindi showed better conditions than Gujranwala and Multan. It is demonstrated that Punjab cities have made progress in economic condition and improvement in social condition but have poor environmental condition. In the study, the environmental dimension has indicators which have more impact on the urban sustainability. Environmental degradation is observed in all selected regions and not a single region showed suitability toward its environmental condition and due to this none of the cities gained suitable scores for urban sustainability. Consequently, urban sustainability is a multidimensional and dynamic process that needs regular evaluation and monitoring. Thus, this article contends that the tools help to highlight and emphasize those areas that need guidance in achieving urban sustainability.     

Prediction of Rock Abrasivity Index (RAI) and Uniaxial Compressive Strength (UCS) of Granite Building Stones Using Nondestructive Tests

Geotechnical and Geological Engineering - Rock abrasivity index (RAI) and uniaxial compressive strength (UCS) are two key parameters for assessing abrasivity and durability of building stones,...     

Rainfall over Oman and its teleconnection with El Niño Southern Oscillation

The Sultanate of Oman is located in the south-eastern part of the Arabian Peninsula and covers the larger part of the southern coasts of the Arabian Peninsula in both arid and semi-arid environments except for the southern part which is swept by the monsoon affecting the Arabian Sea during the period from June to September. The summer rainfall over Oman shows year-to-year variability, and this is caused by oceanic and atmospheric influences. In the present study, we tried to explore the influence of El Niño on the rainfall over Oman using different data sets. The empirical orthogonal function (EOF) technique employed to the zonal wind at 850 hPa for the 30-year period shows that the second and third modes of EOF are showing high variability over the Oman regions. The corresponding PCs were subjected to FFT analysis, and it showed a peak about 5–6 years. In addition to this, the zonal wind over the Oman regions is correlated with the global zonal wind and found a significant correlation (1 % significant level). It has already been proved that the wind and rainfall during summer monsoon is in phase. Moreover, the spectral analysis of rainfall at Masirah station and the Niño3.4 index show the similar mode of variability indicating a direct relationship. The correlation between rainfall and the Niño3.4 index is also showing a positive significant value, and therefore, it can be concluded that the El Niño in the Pacific favours rainfall over the Oman region.     

Assessment of spatial variations in water quality of Garra River at Shahjahanpur,Ganga Basin,India

Arabian Journal of Geosciences - A comprehensive study on the chemical considerations of thermal waters (springs and geothermal wells) on the performance of solute geothermometers in predicting the...     

Performance assessment of a concept propulsor: the thrust-balanced propeller

This paper presents the results of a numerical performance analysis to demonstrate the worthiness of a recently patented new concept propulsor, the so-called “thrust-balanced propeller (TBP)”. The main advantage of this unconventional propulsor is its inherent ability to reduce the unsteady effect of blade forces and moments when it is operating in a non-uniform wake flow. The propulsor comprises a pair of diametrically opposed blades that are connected to one another and mounted so as to be rotatable together through a limited angle about their spindle axis. A quasi-hydrodynamic approach is described and applied to perform the numerical analysis using a state-of-the-art lifting surface procedure for conventional propellers. Performance comparisons with a conventional fixed-pitch propeller are made for the blade forces and moments, efficiency, cavitation extents and fluctuating hull pressures. Bearing in mind the quasi-static nature of the analyses, the results present favourable performance characteristics for the thrust-balanced propeller and support the worthiness of the concept. However, the concept needs to be proved through physical model tests, which are planned to take in a cavitation tunnel.     

Numerical Modeling of Tropical Cyclone-Induced Storm Surge in the Gulf of Oman Using a Storm Surge–Wave–Tide Coupled Model

Ocean Science Journal - A storm surge is a complex phenomenon in which current, tide, and waves interact with each other. Even if the wind is the main force of driving the surge, waves and tide are...     

Chemistry of snow and lake water in Antarctic region

Surface snow and lake water samples were collected at different locations around Indian station at Antarctica, Maitri, during December 2004–March 2005 and December 2006–March 2007. Samples were analyzed for major chemical ions. It is found that average pH value of snow is 6.1. Average pH value of lake water with low chemical content is 6.2 and of lake water with high chemical content is 6.5. The Na⁺ and Cl^? are the most abundantly occurring ions at Antarctica. Considerable amount of SO ₄ ^2? is also found in the surface snow and the lake water which is attributed to the oxidation of DMS produced by marine phytoplankton. Neutralization of acidic components of snow is mainly done by NH ₄ ⁺ and Mg²⁺. The Mg²⁺, Ca²⁺ and K⁺ are nearly equally effective in neutralizing the acidic components in lake water. The NH ₄ ⁺ and SO ₄ ^2? occur over the Antarctica region mostly in the form of (NH₄)₂SO₄.     

An alternative method for non-negative estimation of variance components

A typical problem of estimation principles of variance and covariance components is that they do not produce positive variances in general. This caveat is due, in particular, to a variety of reasons: (1) a badly chosen set of initial variance components, namely initial value problem (IVP), (2) low redundancy in functional model, (3) an improper stochastic model, and (4) data’s possibility of containing outliers. Accordingly, a lot of effort has been made in order to design non-negative estimates of variance components. However, the desires on non-negative and unbiased estimation can seldom be met simultaneously. Likewise, in order to search for a practical non-negative estimator, one has to give up the condition on unbiasedness, which implies that the estimator will be biased. On the other hand, unlike the variance components, the covariance components can be negative, so the methods for obtaining non-negative estimates of variance components are not applicable. This study presents an alternative method to non-negative estimation of variance components such that non-negativity of the variance components is automatically supported. The idea is based upon the use of the functions whose range is the set of all positive real numbers, namely positive-valued functions (PVFs), for unknown variance components in stochastic model instead of using variance components themselves. Using the PVF could eliminate the effect of IVP on the estimation process. This concept is reparameterized on the restricted maximum likelihood with no effect on the unbiasedness of the scheme. The numerical results show the successful estimation of non-negativity estimation of variance components (as positive values) as well as covariance components (as negative or positive values).     

Cenozoic Plate interaction of the Australia and Philippine Sea Plates: “hit-and-run” tectonics

Recent studies in northwest New Guinea have shown the presence of at least two marginal basins of different age, both of which formed in back-arc settings. The older basin opened between the Middle Jurassic and Early Cretaceous, a remnant of which is now preserved as the New Guinea Ophiolite. Its obduction started at 40 Ma and it was finally emplaced on the Australian margin at 30 Ma. The younger basin was active during the Oligocene to Middle Miocene and was obducted in the Early Pliocene. Studies of the western edge of the Philippine Sea also reveal an important deformation of the Philippine arc in the Oligocene, which hitherto has remained unexplained. Using information from these systems, paleomagnetic results, kinematic reconstructions and geochemistry of the supra-subduction ophiolite, we present a plate model to explain the region's Eo–Oligocene development. We suggest that an extensive portion of oceanic crust extended the Australian Plate a considerable distance north of the Australian Craton. As Australia began its steady 7–8 cm/year northward drift in the Early Eocene, this lithosphere was subducted. Thus, the portion of the Philippine Sea Plate carrying the Taiwan–Philippine Arc to its present site may have actually been in contact with the ophiolite now in New Guinea and obduction led to deformation of the Philippine Sea Plate itself. Neogene Plate kinematics transported the deformed belt in contact with the Sunda block in the Late Miocene and Pliocene. This interpretation has implications for the origin for the Philippine Sea Plate and the potential incorporation of continental fragments against its boundaries.     

Evaluating the production and bio-stimulating effect of 5-methyl 1, hydroxy phenazine on microbial fuel cell performance

The role of endogenous redox mediators has considerable importance in electron shuttling reactions and associated performance of microbial fuel cell. Single-chamber microbial fuel cell-II with dual air-cathode assembly (area = 18.84 cm²) supported highest bacterial (Pseudomonas aeruginosa) density (6.7 × 10⁹) and active biomass [4.4 ± 0.3 mg cm^?2 (carbon content = 0.48 ± 0.1 mg cm^?2)] on anode thereby resulting in maximum production of redox metabolite, 5-methyl 1, hydroxy phenazine (301 ppm) and voltage (595 ± 5 mV) than similar cells with relatively less surface area of cathode. It was further revealed that 5-methyl 1, hydroxy phenazine production was positively correlated with chemical oxygen demand removal rate (77 ± 2.5%) and power generation (66.6 ± 2.2 mW cm^?2) efficiency of single-chamber microbial fuel cell-II. Maximum power density of 258 ± 4.5 mW cm^?2 was generated when reactor was supplemented with 2 ml crude extract of 5-methyl 1, hydroxy phenazine metabolite, whereas power output was about 229 ± 2.5 mW cm^?2 when reactor was bio-stimulated with 1 ml pure extract of 5-methyl 1, hydroxy phenazine. With this concentration, the electrochemical response of mixed culture biofilm (sediment) was enhanced by 99.3%. However, further increase in concentration of endogenous mediator proved to be limiting on reactor performance. Pyrosequencing and phylogenetic analysis on the basis of partial 16S rRNA sequences demonstrated both culturable and unculturable bacterial species in anodic biofilm and relative abundance of family Pseudomonadaceae was found to be maximum, i.e., 61.7% followed by Rhodocyclaceae 19.2%, Xanthomonadaceae 6.3% and Opitutaceae 3.18%.