An Elasto-Plastic Constitutive Model for Rock Joints Under Cyclic Loading and Constant Normal Stiffness Conditions

An elasto-plastic constitutive model is introduced for rock joints under cyclic loading, considering the additional shear resistance generated by the asperity damage in the first forward shear cycle and sliding mechanism for further shearing. A series of cyclic loading direct shear tests was conducted on artificial joints with triangular asperities and replicas of a real rock asperity surface under constant normal stiffness (CNS) conditions. The model was calibrated and then validated using selected data sets from the experimental results. Model simulations were found to be in good agreement with the rock joints behaviour under cyclic loading and CNS conditions both in stress prediction and dilation behaviour. In addition, dynamic stability analysis of an underground structure was carried out, using Universal Distinct Element Code and the proposed constitutive model.     

Chemical evolution of a gas-capped deep aquifer,southwest of Iran

The Kangan Aquifer (KA) is located below a gas reservoir in the crest of the Kangan Anticline, southwest of Iran. This aquifer is composed of Permo-Triassic limestone, dolomite, sandstone, anhydrite and shale. It is characterized by a total dissolved solid of about 332,000 mg/L and Na–Ca–Cl-type water. A previous study showed that the source of the KA waters is evaporated seawater. Chemical evolution of the KA is the main objective of this study. The major, minor and trace element concentrations of the KA waters were measured. The chemical evolution of KA waters occurred by three different processes: evaporation of seawater, water–rock and water–gas interactions. Due to the seawater evaporation process, the concentration of all ions in the KA waters increased up to saturation levels. In comparison to the evaporated seawater, the higher concentrations of Ca, Li, Sr, I, Mn and B and lower concentrations of Mg, SO₄ and Na and no changes in concentrations of Cl and K ions are observed in the KA waters. Based on the chemical evolution after seawater evaporation, the KA waters are classified into four groups: (1) no evolution (Cl, K ions), (2) water–rock interaction (Na, Ca, Mg, Li and Sr ions), (3) water–gas interaction (SO₄ and I ions) and (4) both water–rock and water–gas interactions (Mn and B ions). The chemical evolution processes of the KA waters include dolomitization, precipitation, ion exchange and recrystallization in water–rock interaction. Bacterial reduction and diagenesis of organic material in water–gas interaction also occur. A new type of chart, Ca_excess versus Mg_deficit, is proposed to evaluate the dolomitization process.     

An effective stress-based DSC model for predicting the coefficient of lateral soil pressure in unsaturated soils

Acta Geotechnica - In this study, an analytical model is developed to establish a framework for predicting the coefficient of lateral soil pressure in unsaturated soils. To this end, the disturbed...     

Leachability of trace elements from two stabilized low lime Indian fly ashes

Fly ash is a waste by-product obtained from the burning of coal by thermal power plants for generating electricity. When bulk quantities are involved, in order to arrest the fugitive dust, it is stored wet rather than dry. Fly ash contains trace concentrations of heavy metals and other substances in sufficient quantities to be able to leach out over a period of time. In this study an attempt was made to study the leachabilities of a few selected trace metals: Cd, Cu, Cr, Mn, Pb and Zn from two different types of class F fly ashes. Emphasis is also laid on developing an alternative in order to arrest the relative leachabilities of heavy metals after amending them with suitable additives. A standard laboratory leaching test for combustion residues has been employed to study the leachabilities of these trace elements as a function of liquid to solid ratio and pH. The leachability tests were conducted on powdered fly ash samples before and after amending them suitably with the matrices lime and gypsum; they were compacted to their respective proctor densities and cured for periods of 28 and 180 days. A marked reduction in the relative leachabilities of the trace elements was observed to be present at the end of 28 days. These relative leachability values further reduced marginally when tests were performed at the end of 180 days.     

Prediction of Rock Abrasivity Index (RAI) and Uniaxial Compressive Strength (UCS) of Granite Building Stones Using Nondestructive Tests

Geotechnical and Geological Engineering - Rock abrasivity index (RAI) and uniaxial compressive strength (UCS) are two key parameters for assessing abrasivity and durability of building stones,...     

Modelling of Soil Degradation in Semi-arid Area Using Remote Sensing and GIS Techniques,Southern Jordan As Case Study

Doklady Earth Sciences - This research dealt with the topic of modeling the soil lost in a semi-arid desert area in the Ma’an watershed and its surroundings in Ma’an Governorate using...     

Assessing anthropogenic impacts on limited water resources under semi-arid conditions: three-dimensional transient regional modelling in Jordan

Both increasing aridity and population growth strongly stress freshwater resources in semi-arid areas such as Jordan. The country’s second largest governorate, Irbid, with over 1 million inhabitants, is already suffering from an annual water deficit of 25 million cubic meters (MCM). The population is expected to double within the next 20 years. Even without the large number of refugees from Syria, the deficit will likely increase to more then 50 MCM per year by 2035 The Governorate’s exclusive resource is groundwater, abstracted by the extensive Al Arab and Kufr Asad well fields. This study presents the first three-dimensional transient regional groundwater flow model of the entire Wadi al Arab to answer important questions regarding the dynamic quality and availability of water within the catchment. Emphasis is given to the calculation and validation of the dynamic groundwater recharge, derived from a multi-proxy approach, including (1) a hydrological model covering a 30-years dataset, (2) groundwater level measurements and (3) information about springs. The model enables evaluation of the impact of abstraction on the flow regime and the groundwater budget of the resource. Sensitivity analyses of controlling parameters indicate that intense abstraction in the southern part of the Wadi al Arab system can result in critical water-level drops of 10 m at a distance of 16 km from the production wells. Moreover, modelling results suggest that observed head fluctuations are strongly controlled by anthropogenic abstraction rather than variable recharge rates due to climate changes.     

An automated 3D modeling of topological indoor navigation network

Indoor navigation is important for various applications such as disaster management, building modeling, safety analysis etc. In the last decade, indoor environment has been a focus of wide research that includes development of indoor data acquisition techniques, 3D data modeling and indoor navigation. In this research, an automated method for 3D modeling of indoor navigation network has been presented. 3D indoor navigation modeling requires a valid 3D model that can be represented as a cell complex: a model without any gap or intersection such that two cells (e.g. room, corridor) perfectly touch each other. This research investigates an automated method for 3D modeling of indoor navigation network using a geometrical model of indoor building environment. In order to reduce time and cost of surveying process, Trimble LaserAce 1000 laser rangefinder was used to acquire indoor building data which led to the acquisition of an inaccurate geometry of building. The connection between surveying benchmarks was established using Delaunay triangulation. Dijkstra algorithm was used to find shortest path in between building floors. The modeling results were evaluated against an accurate geometry of indoor building environment which was acquired using highly-accurate Trimble M3 total station. This research intends to investigate and propose a novel method of topological navigation network modeling with a less accurate geometrical model to overcome the need of required an accurate geometrical model. To control the uncertainty of the calibration and of the reconstruction of the building from the measurements, interval analysis and homotopy continuation will be investigated in the near future.     

Performance and environmental impact of a turbojet engine fueled by blends of biodiesels

Depletion of conventional fuels, concerns about environmental pollution and the tightening of exhaust emission legislations are the main reasons for increasing research on alternative fuels produced from agricultural feedstock. In this study, biodiesel fuels produced from cotton and corn vegetable oils are investigated as renewable fuels for a gas turbine engine for aviation. The biodiesel fuels are defined as cotton methyl ester (CTME) and corn methyl ester. The performance characteristics and exhaust emissions of the gas turbine engine are investigated when the engine fueled with three blends of 10%(B10), 20%(B20) and 50%(B50) of biodiesel/JetA-1 by volume. The biodiesel fuels were produced using transesterification process and characterized according to ASTM biodiesel specifications. Chemical and physical properties show a real potential of using biodiesel blends as an alternative for JetA-1. The measured engine performance parameters and exhaust emissions are compared with that of pure JetA-1 over a range of throttle setting. The gas turbine engine used in this study is equipped with pressure, flow, temperature, thrust and speed sensors that connected to data acquisition system and control unit in addition to exhaust gas analyzer. The experimental results show that biodiesel fuels can be used up to blend of 50% with JetA-1 in gas turbine engines with slight enhancement in engine performance and significant improvements in exhaust emissions. The engine static thrust is increased with 2% for B50 at lower and medium engine speeds and decreased with 11% at high engine speed compared to conventional JetA-1 fuel. The thrust-specific fuel consumption for biodiesel blends is lower than that for regular JetA-1 fuel. The gas turbine engine efficiency is increased for biodiesel blends by 14% compared to JetA-1, and this is reported for CTME B50. For oxygen concentration in exhaust gases emissions, the higher the biodiesel blend, the higher the O₂ concentration in the exhaust compared with JetA-1 fuel. The O₂ level increased by 6% for biodiesel blend of B50 compared to JetA-1 fuel. The emissions of CO and HC emissions decreased by 5 and 37%, respectively, compared with conventional JetA-1. Additionally, the biodiesel blends achieve a higher CO₂ and NO_x emissions with 11 and 27%, respectively, compared to JetA-1. The sulfur dioxide SO₂ decreased by 75% compared to the regular JetA-1 fuel.     

Health risk of heavy metals from vegetables irrigated with sewage water in peri-urban of Dera Ismail Khan,Pakistan

Health risks of heavy metals in vegetables irrigated with sewage water were investigated in the present study. The findings indicated a massive accumulation of heavy metals in soil and vegetables collected from Dera Ismail khan, Pakistan. The concentration levels of heavy metal in vegetables grown on soil irrigated with untreated sewage water were significantly higher at (P ≤ 0.001) than in vegetables grown on fresh-water-irrigated soil and proceeded the recommended limits of World health organization. Moreover, the findings also indicated that the adults and children consuming such vegetables ingested a large proportion of the selected toxic metals. Health risk index was greater than one for Pb and Cd in all the selected vegetables and was greater than one for Ni in three vegetables like Spinacia oleracea, Benincasa fistulosa and Lactuca sativa. Health risk assessment would be a useful tool for information regarding any threats of heavy metals contamination in vegetables.