Seismic fragility functions for code compliant and non-compliant RC SMRF structures in Pakistan

Fragility functions are derived for low-rise code compliant & non-compliant special moment resisting frames (SMRFs). Non-compliant SMRFs those built in low strength concrete and lacking confining ties in joint panel zones, commonly found in developing countries. Shake table tests were performed on single-storey and two-storey 1:3 reduced scale representative frames to understand the damage mechanism and develop deformation-based damage scale. The non-compliant SMRF experienced column flexure cracking, longitudinal bar-slip in beam and observed with cover concrete spalling from the joint panels. The code compliant SMRF experienced flexure cracks in beam/column, and experienced joint cracking under extreme shaking. Numerical modeling technique is developed for inelastic modeling of reinforced concrete frame with beam bar-slip and joint damageability using SeismoStruct. Natural accelerograms were used to analyze the considered frames through incremental dynamic analyses in SeismoStruct. A probabilistic based approach was used to derive fragility functions for the considered frames. An example case study is presented for damageability evaluation of structures for earthquakes of various return periods (43, 72, 475, 2475 years).     

Speciation and Determination of Inorganic Mercury and Methylmercury by Headspace Single Drop Microextraction and Electrothermal Atomic Absorption Spectrometry in Water and Fish

In this study, headspace single drop microextraction (HS‐SDME) method in combination with electrothermal atomic absorption spectrometry (ETAAS) method was developed and validated for the speciation and determination of inorganic mercury (iHg) and methylmercury (MeHg). MeHg and iHg species were reduced to volatile methylmercury hydride (CH₃HgH) and elemental mercury, respectively, in the presence of NaBH₄ and trapped onto a drop of acceptor phase in the tip of a microsyringe. Thiourea and ammonium pyrrolydinedithiocarbamate (APDC) were tested as the acceptor phase. The experimental parameters of the method such as microextraction time, temperature, NaBH₄ concentration, acceptor phase concentration, and pH of the medium were investigated to obtain distinctive conditions for mercury species. Possible interference effects have also been investigated. In order to validation of the method, analytical figures of merits such as accuracy, precision, limit of detection (LOD), limit of quantitation (LOQ), and linear working range have been evaluated. Accuracy of the method has been verified by analyzing certified reference materials (BCR 453 Tuna fish) and spiked samples. The proposed method was applied for the speciation and determination of mercury species in water and fish samples. Mercury species (MeHg and iHg) have been determined in the real samples with a relative error less than 10%.     

Sorption-desorption kinetics and toxic cell concentration in marine phytoplankton microalgae exposed to Linear Alkylbenzene Sulfonate

Linear Alkylbenzene Sulfonates (LAS) are ubiquitous surfactants. Traces can be found in coastal environments. Sorption and toxicity of C₁₂-LAS congeners were studied in controlled conditions (2-3500 μg C₁₂LAS/L) in five marine phytoplanktonic species, using standardized methods. IC₅₀ values ranged from 0.5 to 2 mg LAS/L. Sorption of ¹⁴C₁₂-6 LAS isomer was measured at environmentally relevant trace levels (4 μg/L) using liquid scintillation counting. Steady-state sorption on algae was reached within 5 h in the order dinoflagellate > diatoms > green algae. The sorption data, fitted a L-type Freundlich isotherm, indicating saturation. Desorption was rapid but a low LAS fraction was still sorbed after 24 h. Toxic cell concentration was 0.38 ± 0.09 mg/g for the studied species. LAS toxicity results from sorption on biological membranes leading to non-specific disturbance of algal growth. Results indicate that LAS concentrations in coastal environments do not represent a risk for these organisms.     

Pesticides Removal Using Conventional and Low‐Cost Adsorbents: A Review

Worldwide pesticide usage has increased dramatically during the last three decades, coinciding with changing practices and increasing by intensive agriculture. This widespread use of pesticides for agricultural and non‐agricultural purposes has resulted in the presence of their residues in various environmental matrices. The occurrence of pesticides and their metabolite transported in rivers, channels, lakes, sea, air, soils, groundwater, and even drinking water, proves the high risk of these chemicals to human health and the environment. Therefore, pesticide removal is of an increasing concern. In this study, a review of the published literature dealing with pesticides removal process is presented. Firstly, pesticide removal by conventional means is briefly considered. Secondly, the use of the low‐cost sorbent through biosorption process is discussed comprehensively. The effect of factors such as pH, contact time, sorbent dosage, initial pesticide concentration, and optimization of biosorption conditions is also discussed. Kinetic, thermodynamic, and mechanism studies are also given. This study shows that both microorganisms and other materials with biological origin like agricultural by‐products may be used to this end. There is a significant potential for pesticide uptake by the use of various pristine and especially modified biosorbents. In the case of living organisms used as removal agents, degradation may also play a role in the total removal observed.     

Seismicity constraints on stress regimes along Sinai subplate boundaries

The relative movement between African, Arabian and Eurasian plates has significantly controlled the tectonic process of Sinai subplate region, although its kinematics and precise boundaries are still doubtful. The respective subplate bounded on both sides by the Aqaba-Dead Sea transform fault to the east and the Gulf of Suez, the only defined part, to the west. Seismicity parameters, moment magnitude relation and fault plane solutions were combined to determine the active tectonics along the aforementioned boundaries. Seven shallow seismogenic zones were defined by the heterogeneity in stress field orientations. Along the eastern boundary, the average fault plane solution obtained from the moment tensor summation (MTS) reveals a sinistral strike-slip faulting mechanism. The corresponding seismic strain rate tensor showed that the present tectonic stress producing earthquakes along the boundary is dominated by both NW-SE compression and NE-SW dilatation. Towards the north, the average focal mechanism showed a normal faulting mechanism of N185°E compression and an N94°E extension in the Carmel Fairi seismic zone. On the other hand, the active crustal deformation along the western boundary (Gulf of Suez region) showed a prevailing tensional stress regime of NE to ENE orientations; producing an average fault plane solution of normal faulting mechanism. The seismic strain rate tensor reveals a dominant stress regime of N58°E extension and N145°E compression in consistence with the general tectonic nature in northeastern Africa. Finally, the extensional to strike-slip stress regimes obtained in the present study emphasize that the deformation accommodated along the Sinai subplate boundaries are in consistence with the kinematics models along the plate boundaries representing the northern extremity part of the Red Sea region.     

Shear Wave Splitting Analysis to Estimate Fracture Orientation and Frequency Dependent Anisotropy

Shear wave splitting is a well-known method for indication of orientation, radius, and length of fractures in subsurface layers. In this paper, a three component near offset VSP data acquired from a fractured sandstone reservoir in southern part of Iran was used to analyse shear wave splitting and frequency-dependent anisotropy assessment. Polarization angle obtained by performing rotation on radial and transverse components of VSP data was used to determine the direction of polarization of fast shear wave which corresponds to direction of fractures. It was shown that correct implementation of shear wave splitting analysis can be used for determination of fracture direction. During frequencydependent anisotropy analysis, it was found that the time delays in shearwaves decrease as the frequency increases. It was clearly demonstrated throughout this study that anisotropy may have an inverse relationship with frequency. The analysis presented in this paper complements the studied conducted by other researchers in this field of research.