Observed particle sizes and fluxes of Aeolian sediment in the near surface layer during sand-dust storms in the Taklamakan Desert

Monitoring, modeling and predicting the formation and movement of dust storms across the global deserts has drawn great attention in recent decades. Nevertheless, the scarcity of real-time observations of the wind-driven emission, transport and deposition of dusts has severely impeded progress in this area. In this study, we report an observational analysis of sand-dust storm samples collected at seven vertical levels from an 80-m-high flux tower located in the hinterland of the great Taklamakan Desert for ten sand-dust storm events that occurred during 2008–2010. We analyzed the vertical distribution of sandstorm particle grain sizes and horizontal sand-dust sediment fluxes from the near surface up to 80 m high in this extremely harsh but highly representative environment. The results showed that the average sandstorm grain size was in the range of 70 to 85 μm. With the natural presence of sand dunes and valleys, the horizontal dust flux appeared to increase with height within the lower surface layer, but was almost invariant above 32 m. The average flux values varied within the range of 8 to 14 kg m^?2 and the vertical distribution was dominated by the wind speed in the boundary layer. The dominant dust particle size was PM₁₀₀ and below, which on average accounted for 60–80 % of the samples collected, with 0.9–2.5 % for PM_0–2.5, 3.5–7.0 % for PM_0–10, 5.0–14.0 % for PM_0–20 and 20.0–40.0 % for PM_0–50. The observations suggested that on average the sand-dust vertical flux potential is about 0.29 kg m^?2 from the top of the 80 m tower to the upper planetary boundary layer and free atmosphere through the transport of particles smaller than PM₂₀. Some of our results differed from previous measurements from other desert surfaces and laboratory wind-dust experiments, and therefore provide valuable observations to support further improvement of modeling of sandstorms across different natural environmental conditions.     

Geography of contamination: The location of industrial waste dumps in Catalonia

The handling of the solid industrial waste (SIW) generated in Catalonia is one of the main problems of industrial and territorial policy confronting the public bodies controlling this area of activity. The most recent estimates in this regard indicate that the annual production of SIW is 1,700,000 tons and that only 300,000 tons are treated.In this situation it is usual for a large number of industries to eliminate their SIW furtively, it is common practice to dump waste in various unprepared areas. In this article we present a series of hypotheses which we believe allow us to understand the logic that guides the siting of a large number of these dumps.In the first place we demonstrate the importance of a series of conditions derived from the same industrial logic, to wit, a) the cost of transporting the SIW to the dumps, b) the industrial decentralization process and the metropolitan development of Catalonia, c) vertical integration and the appearance of companies especially dedicated to the elimination of waste and, d) the development of land use through revaluation of the land and greater possibilities for control forces furtive dumps to be sited in more and more distant areas.Secondly, we examine the role of public bodies in this process, concentrating on the characteristics of the legal system and the real effectiveness of urban controls. Finally, in third place, an explanation is given of research carried out in the Barcelona area which shows the importance of the conditions examined above.     

Line-of-Sight Anisotropies in the Cosmic Dawn and Epoch of Reionization 21-cm Power Spectrum

The line-of-sight direction in the redshifted 21-cm signal coming from the cosmic dawn and the epoch of reionization is quite unique in many ways compared to any other cosmological signal. Different unique effects, such as the evolution history of the signal, non-linear peculiar velocities of the matter etc. will imprint their signature along the line-of-sight axis of the observed signal. One of the major goals of the future SKA-LOW radio interferometer is to observe the cosmic dawn and the epoch of reionization through this 21-cm signal. It is thus important to understand how these various effects affect the signal for its actual detection and proper interpretation. For more than one and half decades, various groups in India have been actively trying to understand and quantify the different line-of-sight effects that are present in this signal through analytical models and simulations. In many ways the importance of this sub-field under 21-cm cosmology have been identified, highlighted and pushed forward by the Indian community. In this article, we briefly describe their contribution and implication of these effects in the context of the future surveys of the cosmic dawn and the epoch of reionization that will be conducted by the SKA-LOW.     

Chemistry of snow and lake water in Antarctic region

Surface snow and lake water samples were collected at different locations around Indian station at Antarctica, Maitri, during December 2004–March 2005 and December 2006–March 2007. Samples were analyzed for major chemical ions. It is found that average pH value of snow is 6.1. Average pH value of lake water with low chemical content is 6.2 and of lake water with high chemical content is 6.5. The Na⁺ and Cl^? are the most abundantly occurring ions at Antarctica. Considerable amount of SO ₄ ^2? is also found in the surface snow and the lake water which is attributed to the oxidation of DMS produced by marine phytoplankton. Neutralization of acidic components of snow is mainly done by NH ₄ ⁺ and Mg²⁺. The Mg²⁺, Ca²⁺ and K⁺ are nearly equally effective in neutralizing the acidic components in lake water. The NH ₄ ⁺ and SO ₄ ^2? occur over the Antarctica region mostly in the form of (NH₄)₂SO₄.     

Leachability of trace elements from two stabilized low lime Indian fly ashes

Fly ash is a waste by-product obtained from the burning of coal by thermal power plants for generating electricity. When bulk quantities are involved, in order to arrest the fugitive dust, it is stored wet rather than dry. Fly ash contains trace concentrations of heavy metals and other substances in sufficient quantities to be able to leach out over a period of time. In this study an attempt was made to study the leachabilities of a few selected trace metals: Cd, Cu, Cr, Mn, Pb and Zn from two different types of class F fly ashes. Emphasis is also laid on developing an alternative in order to arrest the relative leachabilities of heavy metals after amending them with suitable additives. A standard laboratory leaching test for combustion residues has been employed to study the leachabilities of these trace elements as a function of liquid to solid ratio and pH. The leachability tests were conducted on powdered fly ash samples before and after amending them suitably with the matrices lime and gypsum; they were compacted to their respective proctor densities and cured for periods of 28 and 180 days. A marked reduction in the relative leachabilities of the trace elements was observed to be present at the end of 28 days. These relative leachability values further reduced marginally when tests were performed at the end of 180 days.     

Geochemical constraints on the genesis of the volcanic rocks in the southeast of Isfahan area, Iran

Late Miocene–Pliocene to Quaternary calc-alkaline lava flows and domes are exposed in southeast of Isfahan in the Urumieh Dokhtar magmatic belt in the Central Iran structural zone. These volcanic rocks have compositions ranging from basaltic andesites, andesites to dacites. Geochemical studies show these rocks are a medium to high K calc-alkaline suite and meta-aluminous. Major element variations are typical for calc-alkaline rocks. The volcanic rocks have SiO₂ contents ranging between 53.8% and 65.3%. Harker diagrams clearly show that the dacitic rocks did not form from the basaltic andesites by normal differentiation processes. They show large ion lithophile elements- and light rare earth elements (LREE)-enriched normalized multielement patterns and negative Nb, Ti, Ta, and P. Condrite-normalized REE patterns display a steep decrease from LREE to light rare earth elements without any Eu anomaly. These characteristics are consistent with ratios obtained from subduction-related volcanic rocks and in collision setting. The melting of a heterogeneous source is possible mechanism for their magma genesis, which was enriched in incompatible elements situated at the upper continental lithospheric mantle or lower crust. The geochemical characteristics of these volcanic rocks suggested that these volcanic rocks evolved by contamination of a parental magma derived from metasomatized upper lithospheric mantle and crustal melts.     

Using distributed temperature sensing (DTS) technology in acid gas injection design

The use of slickline distributed temperature sensing (SL-DTS) technology is becoming widespread due to its ease of operation and ability to acquire real-time multiple temperature traces inside the wellbore. Injection of treated acid gas (TAG)—a mixture of CO₂ and H₂S—into geologic formations has become an attractive technical and economic option for oil and gas producers and processors who are faced with regulations concerning excess sulfur and greenhouse gas emissions. Acid gas injection (AGI) into geologic formations is more economical and more flexible in dealing with varying TAG compositions than sulfur recovery units (SRUs) using the Claus process. SRUs do not achieve air quality standards and have high operation and maintenance costs. In addition, there is low demand for sulfur and sulfur disposal costs are high. The results of the analysis of SL-DTS data acquired in conjunction with step rate and pressure falloff (PFO) tests are presented in this paper. These tests were conducted to evaluate the injection potential of geologic formations. The injection zone consisted of a carbonate formation characterized by Karst features, vugs, and natural fractures. The SL-DTS data during the initial injection flow rate for the step rate test (SRT) indicated that high permeability zones accepted fluid at lower injection rates. An increasing number of discrete zones began to accept fluid as the injection rate was increased. The results of the SRT provided the fracture pressure of the formation. This information was used to design an AGI program that would avoid fracturing the formation while allowing for the required volume of TAG to be injected. The results of the PFO test provided information on the reservoir pressure and permeability and also indicated the presence of one or more hydraulic fractures. This case study of SL-DTS measurements made during a SRT and a PFO test for the design of an AGI well provides valuable insights into the potential of DTS technology and its use in AGI and carbon capture/sequestration (CCS) operations. Its findings could be applied to analyze injection potential of geological formations not only for AGI projects but also for CCS, and CO₂ enhanced oil recovery opportunities.     

The effect of the geomagnetic activity to the hourly variations of ionospheric foF2 values at low latitudes

In this study, the relationship between the hourly changes of the ionospheric critic frequency values of F2 layers in low latitudes and geomagnetic activity is examined by using statistical methods. The ionospheric critical frequency data has been taken from the Manila (121.1° E, 14.7° N) ionosonde station. In order to investigate the effect of sun activity on ionospheric critical frequency, the data of 1981 when the sun was active and of 1985 when the sun was less active has been used. According to the Granger causality test results, on 5 % significance level, a causality relationship from disturbance storm time (Dst) index values to ionospheric critical frequency values direction has been observed. However, a causality relationship from ionospheric critical frequency values to Dst values has not been observed. From the results of cause-and-effect analysis, it is evaluated that the effect of a shockwave occurring in geomagnetic activity on ionospheric critical frequency continues along 72 h, that is, geomagnetic activity has a long-term effect on ionospheric critical frequency. The response of ionospheric critical frequency to geomagnetic activity substantially depends on seasons. This response is more observed especially in equinox period when the sun is active and in winter months. The increase in geomagnetic activity causes ionospheric critical frequency to decrease in night hours and increase in day hours. The same relationship has not been observed exactly, though observed very little in winter months, for 1985 when the sun was less active.     

Interactive effect of nitrogen fertilizer and hydrocarbon pollution on soil biological indicators

The investigation of the impact of different forms of nitrogen fertilizer (NO₃-N and NH₄-N) on microbial parameters, enzyme activities and phytotoxicity in a petroleum-contaminated soil was evaluated by an incubation study. The tested enzymes, microbial activity and seed germination index showed different patterns in response to both petroleum and nitrogen fertilizer addition and time of incubation. The results apparently showed that the contamination of soil with petroleum has a negative effect on soil ecosystem. Nitrogen fertilizer could improve inhibition of petroleum hydrocarbons in soil. Nevertheless, nitrogen fertilizer had no significant effect on urease activity in the petroleum-contaminated soil. As compared to NO₃-N, the addition of NH₄-N to the soil resulted in a greater impact on soil performance as attested by the recovery of the soil germination capability and higher values of the respiration. The application of nitrogen fertilizer may be suggested as a good strategy for restoring soils in regions affected by the same problem.     

Change detection and visualization of acid mine lakes using time series satellite image data in geographic information systems (GIS): Can (Canakkale) County,NW Turkey

Can, a county in the province of Canakkale, is one of the most prominent coal mining districts in Turkey. Many mining companies have been operating coal deposits for power generation and district heating in this region since 1980. Generally, small and medium-scale mining companies operate for short periods and abandon the operational land without providing any rehabilitation. Human intervention in the natural structure and topography of the earth surface causes large holes and deterioration in these areas. Artificial lakes occur because of surface discharge and underground leakage into abandoned open pit mines with high lignite sulfur content (0.21–14.36 wt %). Furthermore, these lakes gain acidic character due to acid generation from pyrite oxidation. Acid mine lakes are highly acidic (pH < 3.05) and have elevated concentrations of \({\text{SO}}_{4}^{2 - }\) , Fe and some metals. The main objective of this study is to evaluate the environmental conditions and demonstrate the development of a monitoring system for their possible changes in the acid mine lakes of the open cast lignite mining area on a regional scale. For this purpose, the data received from remote sensing satellites were used. Areal change detection and perimeter changes of nine acid mine lakes caused by coal mining companies in Can from 1977 to 2011, were determined using Landsat, Quickbird and Worldview satellite images. As a case study, an area of 9 km² was chosen for the variety of acid mine lakes. Using GIS software, satellite images were analyzed in time series, borders of acid mine lakes were digitized and converted into vector data format. At this stage, prior to the digitization, in order to create contrast on the satellite images, “stretch type” and “stretch values” were changed. The areal and perimeter changes were computed and presented via tables and graphics. In addition, thematic maps of the acid mine lakes were created and visualized. The results show that the number of acid mine lakes increased and these caused environmental risks due to their hydrochemical properties and areal increments.