Empirical assessment of rockfall and debris flow risk along the Karakoram Highway,Pakistan

Natural Hazards - The Karakoram Highway links north Pakistan with southwest China. It passes through unique geomorphological, geological and tectonic setting. This study focused 200-km-long section...     

Travel time based approach for the assessment of vulnerability of karst groundwater: the Transit Time Method

Karst aquifers represent important water resources in many parts of the world. Unfortunately, karst aquifers are characterised by high contamination risks. This paper presents a travel time based method for the estimation of karst groundwater vulnerability. It considers (1) physics-based lateral flow within the uppermost weathered zone (epikarst) in a limestone-dominated region and (2) high velocities of vertical infiltration at discrete infiltration points (e.g. sinkholes) or lines (e.g. dry valleys, faults). Consequently, the Transit Time Method honours the actual flow path within the unsaturated zone of a karst aquifer system. A test site in Northern Jordan was chosen for the demonstration of the assessment technique, i.e. the catchment area of the Qunayyah Spring north of the capital Amman. The results demonstrate that zones of highest vulnerability lie within valleys and nearby main fault zones. It also reveals that regions, categorised as protected areas by other methods due to thick unsaturated zones, contribute to a major degree to the total risk.     

A 2-year study of soil tillage and cattle manure application effects on soil fauna populations under Zea Mays cultivation, in western Iran (Sanandaj)

The absence of environmentally sensitive soil management systems can be considered as one of the major risks to sustainability of agricultural soils in Iran. Tillage is the most critical operation in soil management designed to achieve high crop yield, but it can adversely affect the soil fauna in several ways. In the present study, assessment of soil fauna was carried out in Western Iran in 2008 and 2009 in soil subjected to conventional (CT), minimum (MT) and no (NT)-tillage systems and amended with three levels of cattle manure (CM). Earthworm, mite, springtail and nematode populations were measured as indicators of macro, meso and micro fauna groups, respectively. Soil moisture and bulk density were also determined. Generally, low populations of soil fauna were observed consistent with expectations under similar conditions for this region. Earthworm populations were low and had a patchy distribution. Tillage and CM were found to have no effects on soil mites in both years. Soil springtails were reduced by soil tillage, indicating their sensivity to soil disturbance induced by tillage. In 2008, the nematode population was greater with application of 40 ton ha^?1 CM applications (113 N.100 g soil^?1). Soil tillage-induced disturbance reduced nematode population in 2009 (214 N.100 g soil^?1 at CT). Minimum seedbed preparation besides less soil disturbance makes MT a proper tillage system for Zea mays cultivation. Cattle manure application increased Z. mays’ biomass, but according to our results its annual application is not recommended. There were no changes in BD in both years. We conclude that in short-term studies, soil nematode populations are suitable biological indices (under similar soil and climatic conditions) for the ecological comparison of agricultural management systems in Iran.     

Burial history determination of the Triassic succession of Central and Northern Tunisia using clay minerals

The Oued Belif 48 and Koudiat El Halfa 5 borehole samples have been analysed in order to reveal the mineralogical composition of the Triassic successions and their burial history within the geological evolution of the Tethysian southern margin. Oued Belif 48 borehole belongs to Nefza district which is a part of the “Nappe zone” (Tellian unit, north-western Tunisia). Koudiat El Halfa 5 borehole crosses the Koudiat El Halfa diapir (north–west of the north–south axis, Central Atlas). In this paper, the burial degree of evaporitic Triassic samples was determined by the “illite crystallinity” index and by the evolution of the other phyllosilicates, essentially chlorite, talc and illite/chlorite and illite/smectite mixed layers. The studied samples of the two boreholes are characterized by the presence of abundant clay minerals. The <2-μm grain-size fraction of the samples is mostly composed of illite, chlorite and smectite and may contain a slight percentage of swelling layers (illite/smectite and illite/chlorite). The illite crystallinity value measured on ethylene glycol solvated oriented mounts of the Oued Belif 48 samples oscillates globally between 1 and 2.5 characterizing the epizonal zone with a range of 300–400 °C temperatures. The measures of Koudiat El Halfa 5 samples crystallinity index show a value ranging from 2 to 4, which indicates the anchizone and early epizone burial stage (temperatures around 200 °C). These data can be explained by Miocene magmatic activities characterizing the Triassic material of Nefza district and also by burial phenomena effects.     

Investigation of monotonic and cyclic behavior of sand using a bounding surface plasticity model

Developing the pore water pressures in loose to medium sands below the water table may lead to liquefaction during earthquakes. The simulation of liquefaction (cyclic mobility and flow liquefaction) in sandy soils is one of the major challenges in constitutive modeling of soils. This paper presents the simulation of sand behavior using a critical state bounding surface plasticity model (Dafalias and Manzari’s model, 2004) during monotonic and cyclic loading. The drained, undrained, and cyclic triaxial tests were simulated using Dafalias and Manzari’s model. The simulation results showed that the model predicts behavior of sand, reasonably well. Also, for CSR?<?0.2, number of cycles for liquefaction is significantly increased. The residual strength of Babolsar sand is produced when it is deformed to an axial strain of 20 to 25%.     

Performance and environmental impact of a turbojet engine fueled by blends of biodiesels

Depletion of conventional fuels, concerns about environmental pollution and the tightening of exhaust emission legislations are the main reasons for increasing research on alternative fuels produced from agricultural feedstock. In this study, biodiesel fuels produced from cotton and corn vegetable oils are investigated as renewable fuels for a gas turbine engine for aviation. The biodiesel fuels are defined as cotton methyl ester (CTME) and corn methyl ester. The performance characteristics and exhaust emissions of the gas turbine engine are investigated when the engine fueled with three blends of 10%(B10), 20%(B20) and 50%(B50) of biodiesel/JetA-1 by volume. The biodiesel fuels were produced using transesterification process and characterized according to ASTM biodiesel specifications. Chemical and physical properties show a real potential of using biodiesel blends as an alternative for JetA-1. The measured engine performance parameters and exhaust emissions are compared with that of pure JetA-1 over a range of throttle setting. The gas turbine engine used in this study is equipped with pressure, flow, temperature, thrust and speed sensors that connected to data acquisition system and control unit in addition to exhaust gas analyzer. The experimental results show that biodiesel fuels can be used up to blend of 50% with JetA-1 in gas turbine engines with slight enhancement in engine performance and significant improvements in exhaust emissions. The engine static thrust is increased with 2% for B50 at lower and medium engine speeds and decreased with 11% at high engine speed compared to conventional JetA-1 fuel. The thrust-specific fuel consumption for biodiesel blends is lower than that for regular JetA-1 fuel. The gas turbine engine efficiency is increased for biodiesel blends by 14% compared to JetA-1, and this is reported for CTME B50. For oxygen concentration in exhaust gases emissions, the higher the biodiesel blend, the higher the O₂ concentration in the exhaust compared with JetA-1 fuel. The O₂ level increased by 6% for biodiesel blend of B50 compared to JetA-1 fuel. The emissions of CO and HC emissions decreased by 5 and 37%, respectively, compared with conventional JetA-1. Additionally, the biodiesel blends achieve a higher CO₂ and NO_x emissions with 11 and 27%, respectively, compared to JetA-1. The sulfur dioxide SO₂ decreased by 75% compared to the regular JetA-1 fuel.     

Assessing anthropogenic impacts on limited water resources under semi-arid conditions: three-dimensional transient regional modelling in Jordan

Both increasing aridity and population growth strongly stress freshwater resources in semi-arid areas such as Jordan. The country’s second largest governorate, Irbid, with over 1 million inhabitants, is already suffering from an annual water deficit of 25 million cubic meters (MCM). The population is expected to double within the next 20 years. Even without the large number of refugees from Syria, the deficit will likely increase to more then 50 MCM per year by 2035 The Governorate’s exclusive resource is groundwater, abstracted by the extensive Al Arab and Kufr Asad well fields. This study presents the first three-dimensional transient regional groundwater flow model of the entire Wadi al Arab to answer important questions regarding the dynamic quality and availability of water within the catchment. Emphasis is given to the calculation and validation of the dynamic groundwater recharge, derived from a multi-proxy approach, including (1) a hydrological model covering a 30-years dataset, (2) groundwater level measurements and (3) information about springs. The model enables evaluation of the impact of abstraction on the flow regime and the groundwater budget of the resource. Sensitivity analyses of controlling parameters indicate that intense abstraction in the southern part of the Wadi al Arab system can result in critical water-level drops of 10 m at a distance of 16 km from the production wells. Moreover, modelling results suggest that observed head fluctuations are strongly controlled by anthropogenic abstraction rather than variable recharge rates due to climate changes.     

An automated 3D modeling of topological indoor navigation network

Indoor navigation is important for various applications such as disaster management, building modeling, safety analysis etc. In the last decade, indoor environment has been a focus of wide research that includes development of indoor data acquisition techniques, 3D data modeling and indoor navigation. In this research, an automated method for 3D modeling of indoor navigation network has been presented. 3D indoor navigation modeling requires a valid 3D model that can be represented as a cell complex: a model without any gap or intersection such that two cells (e.g. room, corridor) perfectly touch each other. This research investigates an automated method for 3D modeling of indoor navigation network using a geometrical model of indoor building environment. In order to reduce time and cost of surveying process, Trimble LaserAce 1000 laser rangefinder was used to acquire indoor building data which led to the acquisition of an inaccurate geometry of building. The connection between surveying benchmarks was established using Delaunay triangulation. Dijkstra algorithm was used to find shortest path in between building floors. The modeling results were evaluated against an accurate geometry of indoor building environment which was acquired using highly-accurate Trimble M3 total station. This research intends to investigate and propose a novel method of topological navigation network modeling with a less accurate geometrical model to overcome the need of required an accurate geometrical model. To control the uncertainty of the calibration and of the reconstruction of the building from the measurements, interval analysis and homotopy continuation will be investigated in the near future.     

Health risk of heavy metals from vegetables irrigated with sewage water in peri-urban of Dera Ismail Khan,Pakistan

Health risks of heavy metals in vegetables irrigated with sewage water were investigated in the present study. The findings indicated a massive accumulation of heavy metals in soil and vegetables collected from Dera Ismail khan, Pakistan. The concentration levels of heavy metal in vegetables grown on soil irrigated with untreated sewage water were significantly higher at (P ≤ 0.001) than in vegetables grown on fresh-water-irrigated soil and proceeded the recommended limits of World health organization. Moreover, the findings also indicated that the adults and children consuming such vegetables ingested a large proportion of the selected toxic metals. Health risk index was greater than one for Pb and Cd in all the selected vegetables and was greater than one for Ni in three vegetables like Spinacia oleracea, Benincasa fistulosa and Lactuca sativa. Health risk assessment would be a useful tool for information regarding any threats of heavy metals contamination in vegetables.