Volatiles H2O,CO2, and Cl in a subduction related basalt

The products of the 1974 eruption of Fuego, a subduction zone volcano in Guatemala, have been investigated through study of silicate melt inclusions in olivine. The melt inclusions sampled liquids in regions where olivine, plagioclase, magnetite, and augite were precipitating. Comparisons of the erupted ash, groundmass, and melt inclusion compositions suggest that the inclusions represent samples of liquids present in a thermal boundary layer of the magma body. The concentrations of H₂O and CO₂ in glass inclusions were determined by a vacuum fusion manometric technique using individual olivine crystals (Fo77 to Fo71) with glass inclusion compositions that ranged from high-alumina basalt to basaltic andesite. Water, Cl, and K₂O concentrations increased by a factor of two as the olivine crystals became more iron-rich (Fo77 to Fo71) and as the glass inclusions increased in SiO₂ from 51 to 54 wt.% SiO₂. The concentration of H₂O in the melt increased from 1.6 wt.% in the least differentiated liquid to about 3.5% in a more differentiated liquid. Carbon dioxide is about an order of magnitude less abundant than H₂O in these inclusions. The gas saturation pressures for pure H₂O in equilibrium with the melt inclusions, which were calculated from the glass inclusion compositions using the solubility model of Burnham (1979), are given approximately by P(H₂O)(Pa)=(SiO₂−48.5 wt.%) × 1.45 × 10⁷. The concentrations of water in the melt and the gas saturation pressures increased from about 1.5% to 3.5% and from 300 to 850 bars, respectively, during pre-eruption crystallization.     

Wassereintrittsgeschwindigkeit zum Brunnenfilter in bezug auf die Berechnung der Filterdurchmesser

Ohne Zusammenfassung     

Polymetamorphic relations in iron ores from the Iron Quadrangle,Brazil: The correlation of oxygen isotope variations with deformation history

This study deals with the oxygen isotope composition of hematite-rich ore bodies in the Iron Quadrangle, Brazil. The area studied can be divided into two different regions: a western (W) zone of greenschist facies assemblages and an eastern (E) zone of amphibolite facies with transitions into granulite facies assemblages.The ¹⁸O values of 136 quartz-iron oxide pairs have been determined and temperatures of formation have been calculated. The ¹⁸O values of quartz vary between +6 and 20 except one value near +23, whereas the iron oxides fall between –4 and +10, with nearly 80% of the iron oxide values between –0.5 and 4.0. The regional distribution of the ¹⁸O values is as follows: in the W-region 85% of the quartz are >12, whereas in the E-region only 46% fall in this range, In contrast to quartz the iron oxides do not show any regional differences.The variation of oxygen isotope fractionations between quartz and iron oxides is obviously related to the complex deformation history of the iron ores. Samples with a primary schistosity (S₁) only represent peak metamorphic conditions. In the E-region the (S₁) high temperatures >700° C seem to correspond to orogenic events in the Archaen basement 2,700 m.y. ago. In the W-region S₁-temperatures between 460° and 560° C seem to represent peak metamorphic conditions of the Proterozoic Minas metamorphism 2,000 m.y. ago. Iron ores which have been overprinted by later deformation events are selectively reset to lower isotopic temperatures. The more closely spaced the schistosity planes the larger the extent of a temperature lowering.The genetic processes associated with these hematite-rich ore bodies appear to be sedimentary-metamorphic rather than metasomatic processes. Furthermore, there is no evidence for secondary leaching by weathering solutions.     

Recent crustal movements in the Central Sierra Nevada—Walker lane region of California—Nevada: Part ii, The pyramid lake right-slip fault zone segment of the Walker lane

The Pyramid Lake fault zone is within the Honey Lake—Walker Lake segment of the Walker Lane, a NW-trending zone of right-slip transcurrent faulting, which extends for more than 600 km from Las Vegas, Nevada, to beyond Honey Lake, California. Multiscale, multiformat analysis of Landsat imagery and large-scale (1: 12,000) lowsun angle aerial photography, delineated both regional and site-specific evidence for faults in Late Cenozoic sedimentary deposits southwest of Pyramid Lake. The fault zone is coincident with a portion of a distinct NW-trending topographic discontinuity on the Landsat mosaic of Nevada. The zone exhibits numerous geomorphic features characteristic of strike-slip fault zones, including: recent scarps, offset stream channels, linear gullies, elongate troughs and depressions, sag ponds, vegetation alignments, transcurrent buckles, and rhombohedral and wedge-shaped enclosed depressions. These features are conspicuously developed in Late Pleistocene and Holocene sedimentary deposits and landforms.The Pyramid Lake shear zone has a maximum observable width of 5 km, defined by Riedel and conjugate Riedel shears with maximum observable lenghts of 10 and 3 km, respectively. P-shears have formed symmetrical to the Riedel shears and the principal displacement shears, or continuous horizontal shears, isolate elongate lenses of essentially passive material; most of the shears are inclined at an angle of approximately 4° to the principal direction of displacement. This suggests that the shear zone is in an early “PreResidual Structure” stage of evolution, with the principal deformation mechanism of direct shear replacing the kinematic restraints inherent in the strain field.Historic seismic activity includes microseismic events and may include the earthquake of about 1850 reported for the Pyramid Lake area with an estimated Richter magnitude of 7.0. Based on worldwide relations of earthquake magnitude to length of the zone of surface rupture, the Pyramid Lake fault zone is inferred to be capable of generating a 7.0–7.5-magnitude event for a maximum observable length of approximately 6 km and a 6.75–7.25-magnitude event for a half length of approximately 30 km.     

Zur Frage des Faltenbaues im oberschlesischen Steinkohlenbecken

Ohne Zusammenfassung     

Mixing and differentiation in the Oruanui rhyolitic magma, Taupo, New Zealand: evidence from volatiles and trace elements in melt inclusions

Large pyroclastic rhyolites are snapshots of evolving magma bodies, and preserved in their eruptive pyroclasts is a record of evolution up to the time of eruption. Here we focus on the conditions and processes in the Oruanui magma that erupted at 26.5 ka from Taupo Volcano, New Zealand. The 530 km³ (void-free) of material erupted in the Oruanui event is comparable in size to the Bishop Tuff in California, but differs in that rhyolitic pumice and glass compositions, although variable, did not change systematically with eruption order. We measured the concentrations of H₂O, CO₂ and major and trace elements in zoned phenocrysts and melt inclusions from individual pumice clasts covering the range from early to late erupted units. We also used cathodoluminescence imaging to infer growth histories of quartz phenocrysts. For quartz-hosted inclusions, we studied both fully enclosed melt inclusions and reentrants (connecting to host melt through a small opening). The textures and compositions of inclusions and phenocrysts reflect complex pre-eruptive processes of incomplete assimilation/partial melting, crystallization differentiation, magma mixing and gas saturation. ‘Restitic’ quartz occurs in seven of eight pumice clasts studied. Variations in dissolved H₂O and CO₂ in quartz-hosted melt inclusions reflect gas saturation in the Oruanui magma and crystallization depths of ∼3.5–7 km. Based on variations of dissolved H₂O and CO₂ in reentrants, the amount of exsolved gas at the beginning of eruption increased with depth, corresponding to decreasing density with depth. Pre-eruptive mixing of magma with varying gas content implies variations in magma bulk density that would have driven convective mixing. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

Deriving Optimal Exploration Target Zones on Mineral Prospectivity Maps

This paper describes a quantitative methodology for deriving optimal exploration target zones based on a probabilistic mineral prospectivity map. The methodology is demonstrated in the Rodalquilar mineral district in Spain. A subset of known occurrences of mineral deposits of the type sought was considered discovered and then used as training data, and a map of distances to faults/fractures and three band ratio images of hyperspectral data were used as layers of spatial evidence in weights-of-evidence (WofE) modeling of mineral prospectivity in the study area. A derived posterior probability map of mineral deposit occurrence showing non-violation of the conditional independence assumption and having the highest prediction rate was then put into an objective function in simulated annealing in order to derive a set of optimal exploration focal points. Each optimal exploration focal point represents a pixel or location within a circular neighborhood of pixels with high posterior probability of mineral deposit occurrence. Buffering of each optimal exploration focal point, based on proximity analysis, resulted in optimal exploration target zones. Many of these target zones coincided spatially with at least one occurrence of mineral deposit of the type sought in the subset of cross-validation (i.e., presumed undiscovered) mineral deposits of the type sought. The results of the study showed the usefulness of the proposed methodology for objective delineation of optimal exploration target zones based on a probabilistic mineral prospectivity map.     

Seasonality change and the third millennium BP rainforest crisis in southern Cameroon (Central Africa)

The third millennium BP crisis of the central African rainforest is not sufficiently understood. The low resolution of most pollen profiles and a large plateau of the calibration curve aggravate the exact dating of the event, and its causal climatic parameters are debated. We present a high-resolution pollen profile from the swamp site Nyabessan in the southern Cameroonian rainforest, covering the period 3100-2300 cal yr BP. Between 3100 and 2500 cal yr BP, the climate was favourable for a regional evergreen forest with Caesalpiniaceae and Lophira and a local Raphia swamp forest. Around 2500/2400 cal yr BP, a significant decrease of mature forest and swamp forest taxa and an increase of pioneers indicate that the rain forest was seriously disturbed and replaced by secondary formations. The dominance of Trema orientalis, a pioneer well adapted to seasonal desiccation, points to a much more accentuated seasonality after 2500 cal yr BP, which seems to be linked to a southwards shift of the ITCZ during the northern hemisphere winter months. We propose that the rain forest crisis between 2500 and 2200 cal BP created favourable conditions for farming and paved the way for a major expansion of Bantu speaking populations.     

Diving associated coral breakage in Hong Kong: Differential susceptibility to damage

We conducted the first quantitative assessment of coral breakage along a gradient of diving activities in Hong Kong, the most densely populated city in southern China. A survey of six 1 × 25 m transects at seven sites revealed a total of 81 broken corals, among which 44% were branching, 44% plate-like and 12% massive. There were 3–19 broken colonies per site. At most study sites, the percentage of broken corals exceeded the recommended no-action threshold of 4%, suggesting that management intervention is justified. There was a significant positive correlation between the number of broken coral colonies and the number of divers visiting the site. The branching Acropora and the plate-like Montipora suffered from much higher frequency of damage than their relative abundance, raising the concern that the cumulative impact of such differential susceptibility to breakage may affect coral community composition.     

Early formed regional antiforms and synforms that fold younger matrix schistosities: their effect on sites of mineral growth

In the metamorphic cores of many orogenic belts, large macroscopic folds in compositional layering also appear to fold one or more pervasive matrix foliations. The latter geometry suggests the folds formed relatively late in the tectonic history, after foliation development. However, microstructural analysis of four examples of such folds suggests this is not the case. The folds formed relatively early in the orogenic history and are the end product of multiple, near orthogonal, overprinting bulk shortening events. Once large macroscopic folds initiate, they may tighten further during successive periods of sub-parallel shortening, folding or reactivation of foliations that develop during intervening periods of near orthogonal shortening. Reactivation of the compositional layering defining the fold limbs causes foliation to be rotated into parallelism with the limbs.Multiple periods of porphyroblast growth accompanied the multiple phases of deformation that postdated the initial development of these folds. Some of these phases of deformation were attended by the development of large numbers of same asymmetry spiral-shaped inclusion trails in porphyroblasts on one limb of the fold and not the other, or larger numbers of opposite asymmetry spirals on the other limb, or similar numbers of the same asymmetry spirals on both limbs. Significantly, the largest disparity in numbers from limb to limb occurred for the first of these cases. For all four regional folds examined, the structural relationships that accompanied these large disparities were identical. In each case the shear sense operating on steeply dipping foliations was opposite to that required to originally develop the fold. Reactivation of the folded compositional layering was not possible for this shear sense. This favoured the development of sites of approximately coaxial shortening early during the deformation history, enhancing microfracture and promoting the growth of porphyroblasts on this limb in comparision to the other. These distributions of inclusion trail geometries from limb to limb cannot be explained by porphyroblast rotation, or folding of pre-existing rotated porphyroblasts within a shear zone, but can be explained by development of the inclusion trails synchronous with successive sub-vertical and sub-horizontal foliations.