Linking geomorphology and hydrodynamics: a case study from Península Valdés, Patagonia, Argentina

A case study is presented to assess the relevance of geomorphology in hydrogeological phenomena in an arid coastal area in the Argentinean extra-Andean Patagonia (Península Valdés) with an average rainfall of 232 mm/year and a soil moisture deficit of about 472 mm/year. Various geomorphic units were identified by interpreting Landsat 7 satellite images processed with ER Mapper software and then surveyed in the field, as well as by geological characterization. The hydrodynamic analysis was based on a survey of 89 wells, the construction of equipotential maps, and the interpretation of pumping-test results by a non-equilibrium method. The hydrochemical characterization was based on chemical tests analyzed with the Easy_Quim 6.0 application. The combination of geomorphological, geological, hydrodynamic and hydrochemical elements allowed the definition of hydromorphological units that are typical of recharge, circulation and discharge areas, the latter both for coastal and inland areas in wetlands (salt pans) with elevations to ?40 m relative to sea level. These units and the criteria used for their definition allow immediate recognition of hydrogeological phenomena in arid regions such as the extra-Andean Patagonia, with low information density but with near-optimal satellite imaging of landforms due to the lack of vegetation cover.     

Field characterization and data integration to define the hydraulic heterogeneity of a shallow granular aquifer at a sub-watershed scale

Providing a sound basis for aquifer management or remediation requires that hydrogeological investigations carried out to understand groundwater flow and contaminant transport be based on representative data that capture the heterogeneous spatial distribution of aquifer hydraulic properties. This paper describes a general workflow allowing the characterization of the heterogeneity of the hydraulic properties of granular aquifers at an intermediate scale of a few km². The workflow involves characterization and data integration steps that were applied on a 12-km² study area encompassing a decommissioned landfill emitting a leachate plume and its main surface water receptors. The sediments composing the aquifer were deposited in a littoral–sublittoral environment and show evidence of small-scale transitional heterogeneities. Cone penetrometer tests (CPT) combined with soil moisture and electrical resistivity (SMR) measurements were thus used to identify and characterize spatial heterogeneities in hydraulic properties over the study area. Site-specific statistical relationships were needed to infer hydrofacies units and to estimate hydraulic properties from high-resolution CPT/SMR soundings distributed all over the study area. A learning machine approach was used due to the complex statistical relationships between colocated hydraulic and CPT/SMR data covering the full range of aquifer materials. Application of this workflow allowed the identification of hydrofacies units and the estimation of horizontal hydraulic conductivity, vertical hydraulic conductivity and porosity over the study area. The paper describes and discusses data acquisition and integration methodologies that can be adapted to different field situations, while making the aquifer characterization process more time-efficient and less labor-intensive.     

The state of the environment in Mexico

The present work evaluates the state of the environment in Mexico based on indicators of the present status of the country’s natural resource management, social and economical conditions and anthropogenic modifications. The Mexican environment is interpreted as a spatially open system having a historical character that is essentially determined by the continual interaction between nature, society and economy. The landscape approach is followed, considering as units of territorial analysis each one of the 145 biophysical environmental units included in the national physiographic regionalization. The assessment of 16 indicators for each biophysical environmental unit was made considering their regional environmental integrity problems, the degree of disarticulation of their structure and function, and the alteration of their territorial structure, all of which determine whether or not they accomplish their environmental functions and achieve environmental stability. The classification of the state of the environment included 5 categories in 8 combinations represented in the map of the state of the environment in Mexico for the year 2008. The map shows that nearly 47.10% of the country’s surface has an environmental status ranging between unstable and critical, the problematic areas being mostly concentrated in the southeast and center of the national territory.     

Groundwater geochemistry of the Chihuahua City region in the Rio Conchos Basin (northern Mexico) and implications for water resources management

The Chihuahua City region, located in the semiarid-arid northern highlands of Mexico, has experienced intensive groundwater abstraction during the last 40 years to meet water demands in the region. A geochemical survey was carried out to investigate the evolution from baseline to modern conditions of a 130-km flow path including the El Sauz–Chihuahua–Aldama–San Diego de Alcalá regions. The research approach included the use of major chemical elements, chlorofluorocarbons and environmental isotope (¹⁸O, ²H, ¹³C and ¹⁴C) tracers. Stable isotopes indicate that groundwater evolves from the evaporation of local rainfall and surface water. Groundwater located at the lower end of the flow section is up to 6000 years old and older groundwater in the order of 9000 years BP was found in a deep well located in the upper part of the flow system, implying contribution from a neighbour basin. The background groundwater chemistry upstream of Chihuahua City results from feldspar weathering. Beyond Chihuahua City the chemical conditions are strongly modified owing to disposal of sewage from public and industrial water supplies into the Rio Chuviscar, subsequent allocation of this water to agricultural irrigation areas and direct infiltration under the river bed. As a consequence, anions like chloride and sulphate are mainly related to surface sources. Nitrate is controlled in part by sewage from public supply and industry and in part by agricultural practices. Arsenic and fluoride are related to weathering of rock formations of local mineralized ranges and subsequent enrichment of the basin-fill by magmatic processes. The results of this study have implications for groundwater management in an arid region that depends entirely on groundwater for domestic, industrial and agricultural water consumption. Copyright © 2008 John Wiley & Sons, Ltd.     

Putative Meteoritic Craters in Río Cuarto (Central Argentina) Interpreted as Eolian Structures

Ten oblong aligned depressions in the Río Cuarto area (provincia de Córdoba, Argentina) were supposed to be the result of very-low-angle Holocene meteoroid impacts. However, we consider that authors that studied the structures did not demonstrated their extraterrestrial origin. We suggest that an eolian origin for the structures of Río Cuarto is more likely. Actually, these landforms integrate large systems of similar deflation/accumulation geoforms aligned according to predominant winds during different periods.     

Temporal variability of selected dissolved elements in the lower Orinoco River,Venezuela

Monthly analyses of pH, conductance, alkalinity, total suspended solids, dissolved major cations (Na, K, Ca and Mg), and selected dissolved trace elements (Fe, Al, Mn, Cu, Zn and Cr) were conducted on waters of the lower Orinoco River from February 2004 to May 2006. The data show strong seasonal variability. Major cations had maximum concentrations at low water, and were correlated with pH, conductance and alkalinity because of the tributaries coming from the Andean zones, where the weathering of evaporites and carbonate shales controls water chemistry. K concentrations did not show any relation with evaporite weathering, probably because large amounts of K come from the Guayana Shield rivers as a consequence of feldspar weathering. The concentrations of dissolved Fe, Mn and Cu were highest during the high water stage. Concentrations of the elements K, Cr, Zn and Cu are correlated with each other but not with dissolved Fe and Al, which probably are complexed with humic and fulvic substances. Mn concentrations did not show relationships with other variables. Inter‐annual variability of dissolved elements is explained by temporal changes in precipitation. Copyright © 2008 John Wiley & Sons, Ltd.     

The early Cambrian Chahmir shale-hosted Zn–Pb deposit,Central Iran: an example of vent-proximal SEDEX mineralization

The Chahmir zinc–lead deposit (1.5 Mt @ 6 % Zn + 2 % Pb) in Central Iran is one among several sedimentary-exhalative Zn–Pb deposits in the Early Cambrian Zarigan–Chahmir basin (e.g., Koushk, Darreh-Dehu, and Zarigan). The deposit is hosted by carbonaceous, fine-grained black siltstones, and shales interlayered with volcaniclastic sandstone beds. It corresponds to the upper part of the Early Cambrian volcano-sedimentary sequence (ECVSS), which was deposited on the Posht-e-Badam Block during back-arc rifting of the continental margin of Central Iran. Based on crosscutting relationships, mineralogy, and texture of sulfide mineralization, four different facies can be distinguished: stockwork (feeder zone), massive ore, bedded ore, and distal facies (exhalites with barite). Silicification, carbonatization, sericitization, and chloritization are the main wall-rock alteration styles; alteration intensity increases toward the proximal feeder zone. Fluid inclusion microthermometry was carried out on quartz associated with sulfides of the massive ore. Homogenization temperatures are in the range of 170–226 °C, and salinity is around 9 wt% NaCl eq. The size distribution of pyrite framboids of the bedded ore facies suggests anoxic to locally suboxic event for the host basin. δ³⁴S_(V-CDT) values of pyrite, sphalerite, and galena range from +10.9 to +29.8?‰. The highest δ³⁴S values correspond to the bedded ore (+28.6 to +29.8?‰), and the lowest to the massive ore (+10.9 to +14.7?‰) and the feeder zone (+11.3 and +12.1?‰). The overall range of δ³⁴S is consistent with a sedimentary environment where sulfide sulfur was derived from two sources. One of them was corresponding to early ore-stage sulfides in bedded ore and distal facies, consistent with bacterial reduction from coeval seawater sulfate in a closed or semiclosed basin. However, the δ³⁴S values of late ore-stage sulfides, observed mainly in massive ore, interpreted as a hydrothermal sulfur component, leached from the lower part of the ECVSS. Sulfur isotopes, along with the sedimentological, textural, mineralogical, fluid inclusion, and geochemical characteristics of the Chahmir deposit are in agreement with a vent-proximal (Selwyn type) SEDEX ore deposit model.