The Central Bundelkhand Archaean greenstone complex,Bundelkhand craton,central India: geology,composition, and geochronology of supracrustal rocks

Analysis of 3.3 Ga tonalite–trondhjemite–granodiorite (TTG) series granitoids and greenstone belt assemblages from the Bundelkhand craton in central India reveal that it is a typical Archaean craton. At least two greenstone complexes can be recognized in the Bundelkhand craton, namely the (i) Central Bundelkhand (Babina, Mauranipur belts) and (ii) Southern Bundelkhand (Girar, Madaura belts). The Central Bundelkhand greenstone complex contains three tectonostratigraphic assemblages: (1) metamorphosed basic or metabasic, high-Mg rocks; (2) banded iron formations (BIFs); and (3) felsic volcanics. The first two assemblages are regarded as representing an earlier sequence, which is in tectonic contact with the felsic volcanics. However, the contact between the BIFs and mafic volcanics is also evidently tectonic. Metabasic high-Mg rocks are represented by amphibolites and tremolite-actinolite schists in the Babina greenstone belt and are comparable in composition to tholeiitic basalts-basaltic andesites and komatiites. They are very similar to the metabasic high-Mg rocks of the Mauranipur greenstone belt. Felsic volcanics occur as fine-grained schists with phenocrysts of quartz, albite, and microcline. Felsic volcanics are classified as calc-alkaline dacites, less commonly rhyolites. The chondrite-normalized rare earth element distribution pattern is poorly fractionated (La_N/Lu_N = 11–16) with a small negative Eu anomaly (Eu/Eu* = 0.68–0.85), being characteristic of volcanics formed in a subduction setting. On Rb – Y + Nb, Nb – Y, Rb – Ta + Yb and Ta – Yb discrimination diagrams, the compositions of the volcanics are also consistent with those of felsic rocks formed in subduction settings. SHRIMP-dating of zircon from the felsic volcanics of the Babina belt of the Central Bundelkhand greenstone complex, performed for the first time, has shown that they were erupted in Neoarchaean time (2542 ± 17 Ma). The early sequence of the Babina belt is correlatable with the rocks of the Mauranipur belt, whose age is tentatively estimated as Mesoarchaean. The Central Bundelkhand greenstone complex consists of two (Meso- and Neoarchaean) sequences, which were formed in subduction settings.     

Chronology and Geochemistry of the Berezitovoe Polymetallic Gold Deposit in Eastern Siberia, Russia and its Geological Significance

The Berezitovoe deposit is a large-sized Au-Ag-Zn-Pb deposit in the east of the SelengaStanovoi superterrane, Russia. Au-Ag orebodies are hosted by tourmaline-garnet-quartz-muscovite metasomatic rocks; Zn-Pb orebodies are hosted by granodiorites, porphyritic granites and tourmalinegarnet-quartz-muscovite metasomatic rocks. These orebodies are surrounded by wall rocks dominated by the Tukuringra Complex granodiorites, porphyritic granites, and gneissic granodiorites. The alteration includes silicification and garnet, sericitization chloritization, carbonatization and kaollinization. LA-ICP-MS U-Pb zircon dating indicates that the gold mineralization can be divided into two stages in the Berezitovoe polymetallic gold deposit(at 363.5 ± 1.5 Ma, and133.4± 0.5).Hornblende-plagioclase gneisses of the Mogocha Group in the study area underwent Paleoproterozoic metamorphism(at 1870 ± 7.8 and 2400 ± 13 Ma), gneissic granodiorite of the Tukuringra Complex yields a late Paleozoic magmatic age(at 379.2 ± 1.1 Ma),and subalkaline porphyritic granitoid of the Amudzhikan Complex yield late Mesozoic magmatic ages(133-139 and 150-163 Ma). Granodiorites of the Tukuringra Complex in the study area have high concentrations of SiO_2(average of 60.9 wt%), are aluminum-oversaturated(average A/CNK of 1.49), are enriched in the large ion lithophile elements(e.g.,K, Rb, and Ba), U, Th, and Pb, are depleted in high field strength elements(e.g., Ta, Nb, and Ti), and have slightly negative Eu and no Ce anomalies in chondrite-normalized rare earth element diagrams.Fluid inclusions from quartz veins include three types: aqueous two-phase, CO_2-bearing three-phase,and pure CO_2. Aqueous two-phase inclusions homogenize at 167℃-249℃ and have salinities of 4.32%-9.47% NaCl equivalent, densities of 0.86-0.95 g/cm~3, and formed at depths of 0.52-0.94 km. In comparison, the C0_2-bearing three-phase inclusions have homogenization temperatures of 265℃-346℃,salinities of 7.14%-11.57% NaCl equivalent, and total densities of 0.62-0.67 g/cm~3. The geochemical and zircon U-Pb data and the regional tectonic evolution of the study area, show that the Berezitovoe polymetallic gold deposit formed in an island arc or active continental margin setting, most probably related to late Paleozoic subduction of Okhotsk Ocean crust beneath the Siberian Plate.     

Moving boulders in flash floods and estimating flow conditions using boulders in ancient deposits

Boulders moving in flash floods cause considerable damage and casualties. More and bigger boulders move in flash floods than predicted from published theory. The interpretation of flow conditions from the size of large particles within flash flood deposits has, until now, generally assumed that the velocity (or discharge) is unchanging in time (i.e. flow is steady), or changes instantaneously between periods of constant conditions. Standard practice is to apply theories developed for steady flow conditions to flash floods, which are however inherently very unsteady flows. This is likely to lead to overestimates of peak flow velocity (or discharge). Flash floods are characterised by extremely rapid variations in flow that generate significant transient forces in addition to the mean‐flow drag. These transient forces, generated by rapid velocity changes, are generally ignored in published theories, but they are briefly so large that they could initiate the motion of boulders. This paper develops a theory for the initiation of boulder movement due to the additional impulsive force generated by unsteady flow, and discusses the implications.     

Primary aragonite and high‐Mg calcite in the late Cambrian (Furongian). Potential evidence from marine carbonates in Oman

Transient aragonite seas occurred in the early Cambrian but several models suggest the late Cambrian was a time of calcite seas. Here, evidence is presented from the Andam Group, Huqf High, Oman (Gondwana) that suggests a transient Furongian (late Cambrian) aragonite sea, characterized by the precipitation of aragonite and high‐Mg calcite ooids and aragonite isopachous, fibrous, cements. Stable carbon isotope data suggest that precipitation occurred just before and during the SPICE (Steptoean Positive Carbonate Isotope Excursion). Aragonite and high‐Mg calcite precipitation can be accounted for if mMg:Ca ratios were around 1.2 given the very high atmospheric CO₂ at that time and if precipitation occurred in warm waters associated with the SPICE. This, together with reported occurrences of early Furongian aragonite ooids from various locations in North America (Laurentia), suggests that aragonite and high‐Mg calcite precipitation from seawater may have been more than just a local phenomenon.     

Spatially controlled Fe and Si isotope variations: an alternative view on the formation of the Torres del Paine pluton

We present new Fe and Si isotope ratio data for the Torres del Paine igneous complex in southern Chile. The multi-composition pluton consists of an approximately 1 km vertical exposure of homogenous granite overlying a contemporaneous 250-m-thick mafic gabbro suite. This first-of-its-kind spatially dependent Fe and Si isotope investigation of a convergent margin-related pluton aims to understand the nature of granite and silicic igneous rock formation. Results collected by MC-ICP-MS show a trend of increasing δ⁵⁶Fe and δ³⁰Si with increasing silica content as well as a systematic increase in δ⁵⁶Fe away from the mafic base of the pluton. The marginal Torres del Paine granites have heavier Fe isotope signatures (δ⁵⁶Fe = +0.25 ± 0.02 2se) compared to granites found in the interior pluton (δ⁵⁶Fe = +0.17 ± 0.02 2se). Cerro Toro country rock values are isotopically light in both Fe and Si isotopic systems (δ⁵⁶Fe = +0.05 ± 0.02 ‰; δ³⁰Si = ?0.38 ± 0.07 ‰). The variations in the Fe and Si isotopic data cannot be accounted for by local assimilation of the wall rocks, in situ fractional crystallization, late-stage fluid exsolution or some combination of these processes. Instead, we conclude that thermal diffusion or source magma variation is the most likely process producing Fe isotope ratio variations in the Torres del Paine pluton.     

Unique Marine Olenekian-Anisian Boundary Section from South Primorye, Russian Far East

INTRODUCTION LateOlenekianandAnisianmarinedepositsin SouthPrimoryewerefirststudiedbyD.L.Ivanov,thechiefofageologicalteammakingreconnaissance workfortheconstructionofthetrans Siberianrail road.HecollectedEarlyandMiddleTriassicam monoidsonRussianIsland.Arep…     

Is area affected by flood or stagnant water independently associated with poorer health outcomes in urban slums of Dhaka and adjacent rural areas?

This study investigated the association of flood/stagnant water (FSW) with various health outcomes among respondents living in urban slums of Dhaka and adjacent rural areas. We also assessed the differences of individual-, household- and area-level characteristics between the FSW-affected and non-affected areas. Bangladesh as a whole and slums in the megacity of Dhaka in particular are severely affected by the FSW. Data were collected from 3,207 subjects (aged 10+ years) through baseline surveys conducted in March 2008 and 2009. Twelve big slums in Dhaka and three adjacent villages were selected as study areas. Face-to-face interviews using a multidimensional pre-tested questionnaire were conducted by the trained university graduates. We performed various types of analyses ranging from the simple frequency analysis to the multivariable-adjusted logistic regression modelling. Our empirical findings suggest that slums were more affected by the FSW as compared to the rural areas. People living in the FSW-affected areas were more vulnerable in terms of individual-, household- and area-level characteristics than non-affected people. Age was also significantly associated with various health outcomes. According to multivariable analyses controlled for various factors, the FSW-affected people reported significantly higher likelihoods of health symptoms (namely fever, cold/cough, weakness), communicable diseases (namely diarrhoea and gastric disease) and poor mental well-being as compared to the non-affected people. Only the burden of non-communicable diseases was lower in the FSW-affected areas than the non-affected areas. Our findings lead us to conclude that the FSW-affected area is an independent risk factor for various physical and mental health problems. Urban slums are more affected than rural areas by the FSW. Therefore, we underscore the necessities of well-designed and comprehensive public health interventions focusing on individual, community and higher levels of interventions to reduce the FSW-related health and other consequences among the people living in the FSW-affected areas and urban slums in the rapidly growing city of Dhaka, Bangladesh.     

Experimental and theoretical study of hydration of halide ions

We have studied thermochemistry of the first hydration steps for Cl⁻, Br⁻, and I⁻ in the gas phase both experimentally using high-pressure mass spectrometry (HPMS) and theoretically using density functional theory (DFT) calculations. The highest hydration steps measured experimentally were n = 8 for Cl⁻, n = 7 for Br⁻, and n = 5 for I⁻, all of them being higher than previously reported. Both experimental and theoretical stepwise enthalpies and entropies of hydration for these halides exhibited non-monotonic behavior for successive hydration steps that was not reported in previous HPMS investigations of these reactions. This behavior can be successfully interpreted using halide water cluster geometries obtained from DFT calculations by considering the number of additional hydrogen bonds formed at each hydration step and simultaneous weakening of ion-solvent interaction with increasing cluster size. Results of DFT calculations for surface cluster geometries agree better with experimental results than do the results for interior cluster geometries. We conclude that predominantly surface clusters were observed in our experiments and that small surface clusters have larger number of possible isomers than the interior clusters of the same size. The results for enthalpies of hydration for the studied halide ions lead to the conclusion that ion-solvent interaction is stronger than solvent-solvent interaction for chloride-water clusters. The difference between the two types of interaction diminishes with increasing anion size. The ion-solvent and solvent-solvent interactions are of nearly equal magnitude for iodide.     

Evaluation of I-wall in New Orleans with back-calculated total stress soil parameters

This study back-calculated moduli and shear strength of soils in London Canal Ave., New Orleans, using full-scale load test data, and re-evaluated the behavior of the I-wall to explore how the existing levees and floodwalls may be reliably retrofitted and future levees and floodwalls may be designed. From the back-calculation, it turned out that the moduli of the field soils were mostly higher (1–12 times) than magnitudes appeared in Interagency Performance Evaluation Task Force (IPET). But the shear strength of a water-glazed Marsh layer in the gap turned out to be substantially lower (0.2–0.25 times) than the magnitude appeared in IPET. This much strength reduction was confirmed by field vane shear tests: tests with artificial water infiltration into the field vane hole presented immeasurably low disturbed strength and resulted in very high sensitivity that might contributed to the failure. This study also shows that the gap development and strength reduction in the water-glazed Marsh layer are two main causes of levee failure, which have been predicted in previous research. The stiffer-than-expected moduli of underlain layers did not affect the failure mechanism of the levee substantially because these underlain layers remained elastic. Therefore, retrofitting solutions should be the ones that may prevent the gap development and to reinforce the Marsh layer.     

Potable water for a city: a historic perspective from Bruges,Belgium

Contributing to the optimisation of drinking-water supplies is a key responsibility for professional hydrogeologists. Thus, it is interesting to look back and put current-day practices in the framework of historic evolution and past achievements. The water supply of Bruges (Belgium), with an innovative supply system already established by the end of the 13th century, forms an interesting case study. The supply system consisted of an underground network of pipes feeding public and private wells. A special construction, the Water House, was built to overcome a topographical height difference. Population growth and industrial expansion during the 19th century increased the water demand and new solutions were necessary. Tap water became available from 1925 onwards and, as a stopgap measure to meet demand, deep groundwater was used. This invoked a lively debate among the city council, scientists and entrepreneurs, whereby both water quality and quantity were discussed. Although based on a lack of modern understanding of the groundwater system, some arguments, both pro or contra, look very familiar to current-day hydrogeologists.