Search for nucleosynthetic and radiogenic tellurium isotope anomalies in carbonaceous chondrites

Tellurium isotope data acquired by multiple-collector inductively coupled plasma-mass spectrometry (MC-ICPMS) are presented for sequential acid leachates of the carbonaceous chondrites Orgueil, Murchison, and Allende. Tellurium isotopes are produced by a broad range of nucleosynthetic pathways and they are therefore of particular interest given the isotopic anomalies previously identified for other elements in these meteorites. In addition, the data provide new constraints on the initial solar system abundance of the r-process nuclide ¹²⁶Sn, which decays to ¹²⁶Te with a half-life of 234,500 years. The ¹²⁶Te/¹²⁸Te ratios of all leachates were found to be identical, within uncertainty, despite variations in ¹²⁴Sn/¹²⁸Te of between about 0.002 and 1.4. The data define a ¹²⁶Sn/¹²⁴Sn ratio of <7.7 × 10⁻⁵ at the time of last isotopic closure, consistent with the value of <18 × 10⁻⁵ previously reported for bulk carbonaceous chondrites. How close this is to the initial ¹²⁶Sn/¹²⁴Sn ratio of the solar system depends on when the investigated samples last experienced redistribution of Sn and Te. No clear evidence is found for nucleosynthetic anomalies in the abundances of p-, s-, and r-process nuclides. The largest effect detected in this study is a small excess of the r-process nuclide ¹³⁰Te in a nitric acid leachate of Murchison. This fraction displays an anomalous ε¹³⁰Te of +3.5 ± 2.5. Although barely resolvable given the analytical uncertainties, this is consistent with the presence of a small excess r-process component or an s-process deficit. The general absence of anomalies contrasts with previous results obtained for K, Cr, Zr, Mo, and Ba isotopes in similar leachates, which display nucleosynthetic anomalies of up to 3.8%. The reason for this discrepancy is unclear but it may reflect volatility and more efficient mixing of Te in the solar nebula.     

Constructing economic geographies from corporate interviews: insights from a cross-country comparison of retailer–supplier relationships

In the light of the significant role played by corporate interviews in the construction of contemporary economic geographies, this paper suggests that the practices of corporate interviewing in the research process demand critical reflection. These practices are reflected upon in the context of a comparative study of retailer–manufacturer power relations in the UK and USA. In particular, attention is paid to the ways in which corporate interviews actively construct knowledge of contrasting own-brand supply relationships in these national economies. To do this, the paper addresses the following issues: (i) the embeddedness of corporate interviews in a transforming economic geography; (ii) the processes of identifying, and gaining access to, own-brand supply networks in the UK and USA; (iii) the use of materials resulting from corporate interviews to produce nuanced understandings of own-brand supply relationships; (iv) the adoption of an appropriate textual strategy for writing such interview-based material into economic geography.     

Thermo-mechanical structure beneath the young orogenic belt of Taiwan

We investigate the thermo-mechanical properties beneath the young orogenic belt of Taiwan by constructing a shear strength profile from a vertical stratified rheological structure. The stratified rheological structure is estimated based on the recently developed thermal structure and its likely composition. Subduction–collision in the young orogenic belts and the thick accretionary wedge make a significant contribution to the growth of sialic crust in the hinterland. The sialic bulk crust not only results in a low seismic velocity but also produces weak crust in the hinterland. The earthquake depth–frequency distribution in the foreland and hinterland correlates very well with the regimes of the brittle/ductile transition revealed in the strength profile. Our results show that the observed two-layer seismicity in the foreland is due to a moderate geotherm and an intermediate mafic bulk composition; while single-layer seismicity in the hinterland is due to its felsic bulk composition. In the foreland, the mechanically strong crust (MSC) and the mechanically strong lithosphere (MSL) coincide with frequent seismicity. The shallow MSC in the hinterland is consistent with the 20- to 25-km seismicity occurring there. The total lithospheric integrated strength (LIS) in the hinterland is only about half of that in the foreland, suggesting a weak lower crust and lithosphere mantle in the hinterland. The results confirm that the earthquake cutoff depth is a proxy for temperature. The calculated decrease of effective elastic thickness (EET) from the orogenic margin (foreland) to the center (hinterland) is consistent with the results of flexure modeling in most orogenic belts. Due to the weak LIS in the hinterland, crustal thinning and rifting may occur in the future. Our results, thus, suggest that the mechanical structure is also closely related to the composition and is not directly reflected in the thermal structure.     

Seawater nutrient and carbonate ion concentrations recorded as P/Ca, Ba/Ca, and U/Ca in the deep-sea coral Desmophyllum dianthus

As paleoceanographic archives, deep sea coral skeletons offer the potential for high temporal resolution and precise absolute dating, but have not been fully investigated for geochemical reconstructions of past ocean conditions. Here we assess the utility of skeletal P/Ca, Ba/Ca and U/Ca in the deep sea coral D. dianthus as proxies of dissolved phosphate (remineralized at shallow depths), dissolved barium (trace element with silicate-type distribution) and carbonate ion concentrations, respectively. Measurements of these proxies in globally distributed D. dianthus specimens show clear dependence on corresponding seawater properties. Linear regression fits of mean coral Element/Ca ratios against seawater properties yield the equations: P/Ca_coral (μmol/mol) = (0.6 ± 0.1) P/Ca_sw(μmol/mol) - (23 ± 18), R² = 0.6, n = 16 and Ba/Ca_coral(μmol/mol) = (1.4 ± 0.3) Ba/Ca_sw(μmol/mol) + (0 ± 2), R² = 0.6, n = 17; no significant relationship is observed between the residuals of each regression and seawater temperature, salinity, pressure, pH or carbonate ion concentrations, suggesting that these variables were not significant secondary dependencies of these proxies. Four D. dianthus specimens growing at locations with Ω_arag ? 0.6 displayed markedly depleted P/Ca compared to the regression based on the remaining samples, a behavior attributed to an undersaturation effect. These corals were excluded from the calibration. Coral U/Ca correlates with seawater carbonate ion: U/Ca_coral(μmol/mol) = (−0.016 ± 0.003) (μmol/kg) + (3.2 ± 0.3), R² = 0.6, n = 17. The residuals of the U/Ca calibration are not significantly related to temperature, salinity, or pressure. Scatter about the linear calibration lines is attributed to imperfect spatial-temporal matches between the selected globally distributed specimens and available water column chemical data, and potentially to unresolved additional effects. The uncertainties of these initial proxy calibration regressions predict that dissolved phosphate could be reconstructed to ±0.4 μmol/kg (for 1.3-1.9 μmol/kg phosphate), and dissolved Ba to ±19 nmol/kg (for 41-82 nmol/kg Ba_sw). Carbonate ion concentration derived from U/Ca has an uncertainty of ±31μmol/kg (for ). The effect of microskeletal variability on P/Ca, Ba/Ca, and U/Ca was also assessed, with emphasis on centers of calcification, Fe-Mn phases, and external contaminants. Overall, the results show strong potential for reconstructing aspects of water mass mixing and biogeochemical processes in intermediate and deep waters using fossil deep-sea corals.     

Sediment yield in South Africa — A preliminary geographical analysis

The study examines the spatial relationships between sediment yield and 15 independent environmental variables in 54 catchments in South Africa. Rooseboom's (1978) data on the sediment yield from the catchments were standardized for a single time period. Bivariate regression analyses reveal no simple relationships. Multivariate regression analyses conducted for the whole and various sub-areas of South Africa indicate that latitude and longitude are the primary variables affecting spatial variations in sediment yield. This may be as a result of latitude and longitude being surrogate variables reflecting variation in other environmental variables (e. g. geology, vegetation). Within the sub-areas, 43.4% to 97.8% of the variation in sediment yield is explained by the combined variation in a number of different environmental variables. This study highlights a need for the collection and analysis of more sediment yield data, which would allow the analyses to be refined, to predict sediment yields from ungauged catchments in South Africa.     

Three-Dimensional Modeling of the Casing Effect in Onshore Controlled-Source Electromagnetic Surveys

The presence of steel-cased wells and other infrastructure causes a significant change in the electromagnetic fields that has to be taken into consideration in modeling and interpretation of field data. A realistic and accurate simulation requires the borehole casing to be incorporated into the modeling scheme, which is numerically challenging. Due to the huge conductivity contrast between the casing and surrounding media, a spatial discretization that provides accurate results at different spatial scales ranging from millimeters to hundreds of meters is required. In this paper, we present a full 3D frequency-domain electromagnetic modeling based on a parallel finite-difference algorithm considering the casing effect and investigate its applicability on the borehole-to-surface configuration of the Hontomín CO₂ storage site. To guarantee a robust solution of linear systems with highly ill-conditioned matrices caused by huge conductivity contrasts and multiple spatial scales in the model, we employ direct sparse solvers. Different scenarios are simulated in order to study the influence of the source position, conductivity model, and the effect of the steel casing on the measured data. Several approximations of the real hollow casing that allow for a large reduction in the number of elements in the resulting meshes are studied. A good agreement between the modeled responses and the real field data demonstrates the feasibility of simulating casing effects in complex geological areas. The steel casing of the well greatly increases the amplitude of the surface electromagnetic fields and thus improves the signal-to-noise ratio and the sensitivity to deep targets.     

Fe,Mn, P and S Speciation in Sediments from the Capivara Hydroelectric Dam Lake (Brazil) as an Indicator of Anthropogenic Influences

The conservation of large water resources is essential for the preservation of human life. The quantification and, more importantly, the speciation of chemical substances that indicate the presence of anthropogenic contamination in water resources are of great importance. This paper presents the results of analysis for the determination of organic, inorganic and total phosphorus, pseudo‐sulfur, and iron and manganese, in five fractions, in water sediments collected from the Capivara Hydroelectric Power Plant, Brazil. A study on the seasonal variation of these parameters was conducted, with data having been collected in the winter and in the summer, at two sites along the dam, 5 km apart, close to the city of Primeiro de Maio. Phosphorous was found in sediments and adjacent soil in the organic form (OP), and was used as an indicator of anthropogenic influence on the reservoir banks. Speciation of potentially toxic Mn showed that it is present in the exchangeable fraction of the 0–5 cm depth layer (sediment/water interface), making its transfer to the water column possible. Results from this study showed that domestic and industrial effluent treatment measures are needed for the preservation of the quality of aquatic environments.     

Mode coupling analysis and differential rotation in a flow driven by a precessing cylindrical container

We present a theoretical weakly nonlinear analysis of the dynamics of an inviscid flow submitted to both rotation and precession of an unbounded cylindrical container, by considering the coupling of two Kelvin (inertial) waves. The parametric centrifugal instability known for this system is shown to saturate when one expands the Navier–Stokes equation to higher order in the assumed small precession parameter (ratio of precession to rotation frequencies) with the derivation of two coupled Landau equations suitable to describe the dynamics of the modes. It is shown that an azimuthal mean flow with differential rotation is generated by this modes coupling. The time evolution of the associated dynamical system is studied. These theoretical results can be compared with water experiments and also to some numerical simulations where viscosity and finite length effects cannot be neglected.