Modeling flocculation in a hypertidal estuary

When fine particles are involved, cohesive properties of sediment can result in flocculation and significantly complicate sediment process studies. We combine data from field observations and state-of-the-art modeling to investigate and predict flocculation processes within a hypertidal estuary. The study site is the Welsh Channel located at the entrance of the Dee Estuary in Liverpool Bay. Field data consist of measurements from a fixed site deployment during 12–22 February 2008. Grain size, suspended sediment volume concentration, and current velocity were obtained hourly from moored instruments at 1.5 m above bed. Near-bottom water samples taken every hour from a research vessel are used to convert volume concentrations to mass concentrations for the moored measurements. We use the hydrodynamic model Proudman Oceanographic Laboratory Coastal Ocean Modelling System (POLCOMS) coupled with the turbulence model General Ocean Turbulence Model (GOTM) and a sediment module to obtain three-dimensional distributions of suspended particulate matter (SPM). Flocculation is identified by changes in grain size. Small flocs were found during flood and ebb periods—and correlate with strong currents—due to breakup, while coarse flocs were present during slack waters because of aggregation. A fractal number of 2.4 is found for the study site. Turbulent stresses and particle settling velocities are estimated and are found to be related via an exponential function. The result is a simple semiempirical formulation for the fall velocity of the particles solely depending on turbulent stresses. The formula is implemented in the full three-dimensional model to represent changes in particle size due to flocculation processes. Predictions from the model are in agreement with observations for both settling velocity and SPM. The SPM fortnight variability was reproduced by the model and the concentration peaks are almost in phase with those from field data.     

Precise/ Small Sample Size Determinations of Lithium Isotopic Compositions of Geological Reference Materials and Modern Seawater by MC-ICP-MS

The Li isotope ratios of four international rock reference materials, USGS BHVO-2, GSJ JB-2, JG-2, JA-1 and modern seawater (Mediterranean, Pacific and North Atlantic) were determined using multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS). These reference materials of natural samples were chosen to span a considerable range in Li isotope ratios and cover several different matrices in order to provide a useful benchmark for future studies. Our new analytical technique achieves significantly higher precision and reproducibility (< ± O.3%o 2s) than previous methods, with the additional advantage of requiring very low sample masses of ca . 2 ng of Li.     

Microfacies and diagenesis of older Pleistocene (pre‐last glacial maximum) reef deposits,Great Barrier Reef,Australia (IODP Expedition 325): A quantitative approach

During Integrated Ocean Drilling Program Expedition 325, 34 holes were drilled along five transects in front of the Great Barrier Reef of Australia, penetrating some 700 m of late Pleistocene reef deposits (post‐glacial; largely 20 to 10 kyr bp ) in water depths of 42 to 127 m. In seven holes, drilled in water depths of 42 to 92 m on three transects, older Pleistocene (older than last glacial maximum, >20 kyr bp ) reef deposits were recovered from lower core sections. In this study, facies, diagenetic features, mineralogy and stable isotope geochemistry of 100 samples from six of the latter holes were investigated and quantified. Lithologies are dominated by grain‐supported textures, and were to a large part deposited in high‐energy, reef or reef slope environments. Quantitative analyses allow 11 microfacies to be defined, including mixed skeletal packstone and grainstone, mudstone‐wackestone, coral packstone, coral grainstone, coralline algal grainstone, coral‐algal packstone, coralline algal packstone, Halimeda grainstone, microbialite and caliche. Microbialites, that are common in cavities of younger, post‐glacial deposits, are rare in pre‐last glacial maximum core sections, possibly due to a lack of open framework suitable for colonization by microbes. In pre‐last glacial maximum deposits of holes M0032A and M0033A (>20 kyr bp ), marine diagenetic features are dominant; samples consist largely of aragonite and high‐magnesium calcite. Holes M0042A and M0057A, which contain the oldest rocks (>169 kyr bp ), are characterized by meteoric diagenesis and samples mostly consist of low‐magnesium calcite. Holes M0042A, M0055A and M0056A (>30 kyr bp ), and a horizon in the upper part of hole M0057A, contain both marine and meteoric diagenetic features. However, only one change from marine to meteoric pore water is recorded in contrast with the changes in diagenetic environment that might be inferred from the sea‐level history. Values of stable isotopes of oxygen and carbon are consistent with these findings. Samples from holes M0032A and M0033A reflect largely positive values (δ¹⁸O: ?1 to +1‰ and δ¹³C: +1 to +4‰), whereas those from holes M0042A and M0057A are negative (δ¹⁸O: ?4 to +2‰ and δ¹³C: ?8 to +2‰). Holes M0055A and M0056A provide intermediate values, with slightly positive δ¹³C, and negative δ¹⁸O values. The type and intensity of meteroric diagenesis appears to have been controlled both by age and depth, i.e. the time available for diagenetic alteration, and reflects the relation between reef deposition and sea‐level change.     

Relict olivine grains, chondrule recycling, and implications for the chemical, thermal, and mechanical processing of nebular materials

Chondrules and isolated forsterites in five low-subtype ordinary chondrites [NWA 3127 (LL3.1), Sahara 97210 (LL3.2), Wells (LL3.3), Chainpur (LL3.4), and Sahara 98175 (LL3.5)] were studied using petrographic, EMPA, and SIMS techniques to better constrain the origin of chondrules and the olivine grains within them. Our results imply that igneous crystallization, vapor fractionation, redox effects, and open-system behavior were important processes. All olivine grains, including normal, relict, and isolated forsterite grains, show evidence for igneous fractionation under disequilibrium conditions, with olivine crystallizing during rapid cooling (closer to 2000 °C/h than to 100 °C/h). Vapor fractionation is manifested by anti-correlated abundances between refractory elements (Al, Sc, Y, Ti, Ca, V) and volatile elements (Cr, Mn, P, Rb, Fe) in olivine. Redox effects are evidenced in various ways, and imply that Fe, Co, Ni, and P were partitioned more into metal, and V was partitioned more into olivine, under reducing conditions in the most FeO-poor melts. There is no obvious evidence for systematic variations in olivine composition according to meteorite subtype, but shock melting in Sahara 97210 resulted in the injection of glass-derived melt into olivine, resulting in artificially high abundances of Ba, Sr, Na, Ti, and some other incompatible elements in olivine. Terrestrial weathering in a hot desert environment may have mobilized Ba and Sr in some glasses.Our data suggest that chondrules in ordinary chondrites experienced repeated thermal, chemical, and mechanical processing during a “recycling” process over an extended time period, which involved multiple episodes of melting under fluctuating redox and heating conditions, and multiple episodes of chondrule break-up in some cases. Forsterite grains, including normal grains in forsterite-bearing type I chondrules, the cores of isolated forsterites, and relict forsterite in type II chondrules, all crystallized from similar, refractory melts under reducing conditions; relict Mg-olivine and isolated forsterite grains were thus derived from type I chondrules. Olivine in type II chondrules, including normal grains and ferroan overgrowths on relict Mg-olivine, crystallized from more volatile-rich, oxidized, and relatively unfractionated melts. Relict dusty olivine grains in type I chondrules were derived from type II chondrules during incomplete melting episodes involving reduction and some vaporization, with clear (non-dusty) grains in dusty olivine-bearing chondrules crystallizing from the reduced and partly vaporized melts. Melt compositions parental to normal olivine grains in type I and II chondrules are systematically enriched in refractory elements compared to bulk chondrule compositions, implying that chondrules often experienced open-system exchange with more volatile-rich surroundings after some olivine had crystallized, possibly while the chondrules were still partly molten. Type II chondrules could have been derived from type I chondrules by the addition of relatively volatile-rich material, followed by re-melting and little evaporation under oxidizing conditions. In contrast, type I chondrules could have been derived from type II chondrules by re-melting involving more-or-less evaporation under reducing conditions. Chemical, oxygen isotope, and petrographic data are best accommodated by a model in which there were several (>2-3, sometimes ?4-5) melting episodes for most chondrules in ordinary chondrites.     

Paleoecology and radiocarbon dating of the Pleistocene megafauna of the Brazilian Intertropical Region

During the Pleistocene a fauna composed of large (biomass > 44 kg) and giant mammals (biomass > 1000 kg) that are usually associated with open environments lived in the Brazilian Intertropical Region. We present here new information concerning the paleoecology and chronology of some species of this megafauna. Carbon isotope analyses were performed for a better understanding of the paleoecology of the species Eremotherium laurillardi (Lund, 1842), Notiomastodon platensis (Ameghino, 1888) and Toxodon platensis (Owen, 1849). The δ¹³C data allow attributing a generalist diet to these species, which varied according to the kind of habitat in which they lived. In more open habitats all species were grazers; in mixed habitats E. laurillardi and T. platensis were mixed feeders, and N. platensis was grazer; and in more closed habitats all species were mixed feeders.     

Vulnerabilities and migration in Small Island Developing States in the context of climate change

The unique characteristics of Small Island Developing States and structural vulnerabilities they face in terms of development have earned them particular consideration in the development agenda. This article sheds light on some of the vulnerabilities that these countries face, making particular reference to their environmental and economic vulnerabilities. It then highlights the ambiguous role that international migration plays in the recreation of those vulnerabilities.     

Influence of climatic teleconnections on the temporal isotopic variability as recorded in a firn core from the coastal Dronning Maud Land,East Antarctica

Ice and firn core studies provide one of the most valuable tools for understanding the past climate change. In order to evaluate the temporal isotopic variability recorded in ice and its relevance to environmental changes, stable isotopes of oxygen and hydrogen were studied in a firn core from coastal Dronning Maud Land, East Antarctica. The annual δ ¹⁸O profile of the core shows a close relation to the El Niño Southern Oscillation (ENSO) variability. The ENSO indices show significant correlation with the surface air temperatures and δ ¹⁸O values of this region during the austral summer season and support an additional influence related to the Southern Annular Mode (SAM). The correlation between the combined ENSO-SAM index and the summer δ ¹⁸O record seems to have been caused through an atmospheric mechanism. Snow accumulation in this region illustrates a decreasing trend with opposite relationships with δ ¹⁸O data and surface air temperature prior and subsequent to the year 1997. A reorganization of the local water cycle is further indicated by the deuterium excess data showing a shift around 1997, consistent with a change in evaporation conditions. The present study thus illustrates the utility of ice-core studies in the reconstruction of past climate change and suggests possible influence of climatic teleconnections on the snow accumulation rates and isotopic profiles of snow in the coastal regions of east Antarctica.     

Crustal and upper mantle structures of the brazilian coast

The Rayleigh wave phase and group velocities in the period range of 24–39 sec, obtained from two earthquakes which occurred in northeastern brazil and which were recorded by the Brazilian seismological station RDJ (Rio de Janeiro), have been used to study crustal and upper mantle structures of the Brazilian coastal region. Three crustal and upper mantle models have been tried out to explain crustal and upper mantle structures of the region. The upper crust has not been resolved, due basically to the narrow period range of the phase and group velocities data. The phase velocity inversions have exhibited good resolutions for both lower crust and upper mantle, with shear wave velocities characteristic of these regions. The group velocity data inversions for these models have showed good results only for the lower crust. The shear wave velocities of the lower crust (3.86 and 3.89 km/sec), obtained with phase velocity inversions, are similar to that (=3.89 km/sec) found byHwang (1985) to the eastern South American region, while group velocity inversions have presented shear velocity (=3.75 km/sec) similar to that (=3.78 km/sec) found byLazcano (1972) to the Brazilian shield. It was not possible to define sharply the crust-mantle transition, but an analysis of the phase and group velocity inversions results has indicated that the total thickness of the crust should be between 30 and 39 km. The crustal and upper mantle model, obtained with phase velocity inversion, can be used as a preliminary model for the Brazilian coast.     

Determination of the distribution of size of irregularly shaped particles from laser diffractometer measurements

The formal stereological transformation equation for particle sieve size distribution from measurements in lower dimensional spaces is applied to laser diffractometer measurements. The transformation function for iron ore particles is measured experimentally, and modeled. The solution is tested against the measured transformation function data as well as synthetic composite distributions of the original sample. The natural size distribution of a sample taken from a grinding circuit stream was measured by a combination of standard sieving and cyclosizer, and the result is compared to the transformed size distribution calculated from laser diffractometer measurements. The stereological transformation technique performed well in all cases.     

Effectiveness of a market-based instrument for the allocation of water in a tropical river environment

The seasonal nature of Australia’s tropical rivers means that connected groundwater aquifers are an important source of both consumptive and non-consumptive water, particularly during the dry season. The management of these common pool groundwater resources is one of the predominant water issues facing northern Australia. A national program of water reform stipulates the expansion of water trading as a key instrument for water allocation. The effectiveness of new institutional arrangements such as water markets will be determined mostly by how well they coordinate with local environmental requirements, local institutions and local norms. This paper describes a novel application of combined field work, institutional analysis, experimental economics and agent-based modeling to the analysis of a potential water market in the Katherine region of the Northern Territory, Australia. The effectiveness of different versions of the policy instrument is assessed in light of local conditions. Instruments that enable personal relationships and local institutions and norms to play a role in water management are found to be more effective in terms of both farming income and environmental impact.