The Aterno valley strong-motion array: seismic characterization and determination of subsoil model

The paper focuses on the strong motion array deployed in the upper Aterno River Valley, in the immediate outskirts north-west of the town of L’Aquila, which is part of the Italian Strong Motion Network operated by the Department of Civil Protection. The array is composed of six accelerometric stations located along a cross section of the valley. The importance of this array relies on the fact that a large amount of high-quality records were obtained during the 2009 L’Aquila seismic sequence, from both the mainshock and several aftershocks. These data are especially important to investigate site effects in sediment-filled valleys during moderate earthquakes in epicentral area because well-documented observational studies are very limited in the literature. However, the main drawback for the study of site effects in the Aterno valley is the lack of a detailed knowledge of the geometry of the valley, soil layering and dynamic properties of materials. The main motivation for this study stems from the need to provide a reliable subsoil model of the valley coupled with high-quality strong motion data. Based on the above, in the framework of S4 project, a major effort was undertaken to get a trustworthy cross section of the valley by an ad hoc investigation, comprising geological and geotechnical surveys as well as an extensive geophysical campaign, characterized by both active and passive measurements. These results were complemented by additional geological and geotechnical data available in the literature. By merging all the information acquired, a 2D subsoil model of the transversal section of the upper Aterno valley has been produced. The valley is characterised by an asymmetric shape with a shallower rock basement at the western edge of the valley that deepens at the valley centre. Moreover, based on the results of geophysical tests, representative V_s values were assigned to the different lithologic units forming the alluvial deposits filling the valley. Shear wave velocity is a fundamental parameter for ground response studies and it is also effective in classifying the accelerometric station from a seismic point of view. The 2D model may be therefore, considered a benchmark model for future studies of site effects. It will offer the possibility to examine site effects with a complex underlying geology and to validate the results of numerical simulations of site response analyses with the numerous observations from earthquake recordings, both for weak and strong ground motion conditions.     

A new empirical estimator of coseismic landslide displacement for Zagros Mountain region (Iran)

Earthquake-induced landslides are responsible worldwide for significant socioeconomic losses and historically have a prominent position in the list of natural hazards affecting the Iran plateau. As a step toward the development of tools for the assessment and the management of this kind of hazard at regional scale, an empirical estimator of coseismic displacements along potential sliding surfaces was obtained through a regression analysis for the Zagros region, a mountainous Iranian region subjected to earthquake-induced landslides. This estimator, based on the Newmark’s model, allows to evaluate the expected permanent displacement (named “Newmark displacement”) induced by seismic shaking of defined energy on potential sliding surface characterized by a given critical acceleration. To produce regression models for Newmark displacement estimators, a data set was constructed for different critical acceleration values on the basis of 108 accelerometric recordings from 80 Iranian earthquakes with moment magnitudes between 3.6 and 7. The empirical estimator has a general form, proposed by Jibson (Eng Geol 91:209–218, 2007), relating Newmark displacement to Arias intensity (as parameter representing the energy of the seismic forces) and to critical acceleration (as parameter representing the dynamic shear resistance of the sliding mass). As an example of application, this relation was employed to provide a basic document for earthquake-induced landslide hazard assessment at regional scale, according to a method proposed by Del Gaudio et al. (Bull Seismol Soc Am 93:557–569, 2003), applied to the whole Iranian territory, including Zagros region. This method consists in evaluating the shear resistance required to slopes to limit the occurrence of seismically induced failures, on the basis of the Newmark’s model. The obtained results show that the exposure to landslide seismic induction is maximum in the Alborz Mountains region, where critical accelerations up to ~0.1 g are required to limit the probability of seismic triggering of coherent type landslides within 10% in 50 years.     

The role of international environmental instruments in enhancing transboundary marine protected areas: An approach in East Africa

The increasing degradation of marine ecosystems has led to multiple calls for greater protection through the establishment of marine protected areas (MPAs). If created at the ecosystem or ecoregion level, MPAs will likely straddle maritime boundaries and therefore necessitate international cooperation. International environmental law and international law of the sea may facilitate cooperation between States in creating transboundary MPAs. The extent to which this body of law is actually or potentially useful for the establishment of transboundary MPAs is examined in the context of the East African Marine Ecoregion, focusing on Mozambique, South Africa, and Tanzania. A general survey and assessment of the applicable global, regional, and bilateral instruments in relation to the three States is conducted. Although some global instruments are relevant in the East African context, regional and bilateral instruments are more conducive to the establishment of transboundary MPAs. The article concludes that although a trilateral agreement between Mozambique, South Africa, and Tanzania would be an ideal vehicle for the establishment of a transboundary network of MPAs addressing both national and ecoregional conservation interests, a separate solution at each border will be the first step towards this goal.     

Background simulations for the Large Area Detector onboard LOFT

The Large Observatory For X-ray Timing (LOFT), currently in an assessment phase in the framework the ESA M3 Cosmic Vision programme, is an innovative medium-class mission specifically designed to answer fundamental questions about the behaviour of matter, in the very strong gravitational and magnetic fields around compact objects and in supranuclear density conditions. Having an effective area of ～10 m² at 8 keV, LOFT will be able to measure with high sensitivity very fast variability in the X-ray fluxes and spectra. A good knowledge of the in-orbit background environment is essential to assess the scientific performance of the mission and optimize the design of its main instrument, the Large Area Detector (LAD). In this paper the results of an extensive Geant-4 simulation of the instrumentwillbe discussed, showing the main contributions to the background and the design solutions for its reduction and control. Our results show that the current LOFT/LAD design is expected to meet its scientific requirement of a background rate equivalent to 10 mCrab in 2?30 keV, achieving about 5 mCrab in the most important 2–10 keV energy band. Moreover, simulations show an anticipated modulation of the background rate as small as 10 % over the orbital timescale. The intrinsic photonic origin of the largest background component also allows for an efficient modelling, supported by an in-flight active monitoring, allowing to predict systematic residuals significantly better than the requirement of 1 %, and actually meeting the 0.25 % science goal.     

Simulations of the 2004 lava flow at Etna volcano using the magflow cellular automata model

Since the mechanical properties of lava change over time, lava flows represent a challenge for physically based modeling. This change is ruled by a temperature field which needs to be modeled. MAGFLOW Cellular Automata (CA) model was developed for physically based simulations of lava flows in near real-time. We introduced an algorithm based on the Monte Carlo approach to solve the anisotropic problem. As transition rule of CA, a steady-state solution of Navier-Stokes equations was adopted in the case of isothermal laminar pressure-driven Bingham fluid. For the cooling mechanism, we consider only the radiative heat loss from the surface of the flow and the change of the temperature due to mixture of lavas between cells with different temperatures. The model was applied to reproduce a real lava flow that occurred during the 2004–2005 Etna eruption. The simulations were computed using three different empirical relationships between viscosity and temperature.     

Transient processes in Stromboli’s shallow basaltic system inferred from dolerite and magmatic breccia blocks erupted during the 5 April 2003 paroxysm

We describe the mineralogy, geochemistry, and mesomicrostructure of fresh subvolcanic blocks erupted during the 5 April 2003 paroxysm of Stromboli (Aeolian Islands, Italy). These blocks represent ∼50 vol.% of the total erupted ejecta and consist of fine- to medium-grained basaltic lithotypes ranging from relatively homogeneous dolerites to strongly or poorly welded magmatic breccias. The breccia components are represented by angular fragments of dolerites entrapped in a matrix of vesiculated (lava-like to scoriae) crystal-rich (CR) basalt. All of the studied blocks are cognates with the CR basalt of the normal Strombolian activity or lavas and they are often coated by a few-centimeter thick layer of crystal-poor (CP) basaltic pumice erupted during the paroxysm. We suggest that they result from the rapid increase of pressure and related subvolcanic rock failure that occurred shortly before the 5 April 2003 explosion, when the uppermost portion of the edifice inflated and suffered brecciation as the result of the sudden rise of the gas-rich CP basalt that triggered the eruption. Dolerites and magmatic matrix of the breccias show major and trace element compositions that match those of the CR basalts erupted during normal Strombolian activity and effusive events at Stromboli volcano. Dolerites consist of (a) phenocrysts normally found in the CR basalts and (b) late-stage magmatic minerals such as sanidine, An_60-28 plagioclase, Fe–Mn-rich olivines (Fo_68-48), phlogopite, apatite, and opaque mineral pairs (magnetite and ilmenite), most of which are never found both in lava flows and scoriae erupted during the persistent explosive activity that characterizes typical Strombolian behavior. Subvolcanic crystallization of the Stromboli CR magma, leading to slowly cooled equivalents of basalts, could result from transient drainage of the magma from the summit craters to lower levels. Fingering and engulfing of the material that collapsed from the summit crater floor into the shallow basaltic system during the late evening of 28 December 2002 coupled with the short break in the summit persistent explosions between December 2002 and March 2003 permitted the CR magma pockets to solidify as dolerites, which were confined to the uppermost portion of the system and thus not involved in the ongoing flank effusive activity. Crystal size distribution of the basaltic blocks and crystallization of the finer-grained (<0.1 mm) mafic minerals of the dolerites over a time interval of ∼100 days closely agrees with the above interpretation. Vesicle filling (miarolitic cavities) locally found in some dolerites, with minerals deposited as vapor-phase crystallization is a result of continuous gas percolation through the rocks of the uppermost portion of the volcanic system. Poorly welded magmatic breccias formed during syn-eruptive processes of 5 April 2003, when the paroxysm strongly shattered the shallow subvolcanic system and many dolerite fragments were entrapped in the CR magma. In contrast, the high degree of welding between the dolerite clasts and the CR basaltic matrix in the strongly welded magmatic breccias provides a snapshot of subvolcanic intrusions of the CR basalt into the dolerite when, after a 2-month break in activity, CR magmas started to rise again to the summit craters. Blocks similar to these subvolcanic ejecta of 5 April 2003 were also erupted during previous paroxysms (e.g., 1930) suggesting that changes in the usual Strombolian activity (e.g., short breaks in the persistent mild explosions and/or flank effusive activity) lead to transient crystallization of dolerites in the shallow plumbing system.     

The Salamón gold deposit (León, Spain)

Located 55 km NE of the provincial capital León, Salamón deposit, discovered in 1985, is located on the southern slope of the Cantabrian Mountains, in the north of the Iberian Peninsula. The deposit is located on the León fault, which is a late-Variscan, E–W trending, deep structure extending for more than 100 km. The León fault has a complex history, and many mines and occurrences are located near it. The deposit is also close to small stocks and dykes of igneous rocks with intermediate to basic composition to which the mineralisation is related. The mineralisation is hosted mainly by the limestones and bituminous shales of the Lena Group (Namurian–Westphalian). There is also some mineralisation in other stratigraphic units of the Upper Carboniferous, such as the Maraña Group or the Stephanian B sediments.Apart from local and regional exploration, a detailed mineralogical and metallogenic research has been carried out. The epithermal mineralisation of Salamón was developed in two phases: an early dominant and extensive stage, with very fine crystalline gold-bearing sulphides, mainly pyrite, arsenic-bearing pyrite and arsenopyrite, in a matrix of quartz–chalcedony (jasperoid) and dolomite, and a later stage, of a larger crystal size, which occurs replacing the early stage or in pockets and veins, with greater mineralogical variety. Last of all there is a stage of supergene mineralisation, a product of the oxidant action of meteoric waters over the previous minerals. The hydrothermal alterations of the host rocks related to the orebodies are fundamentally decarbonatisation–dolomitisation, silicification and argillitisation. The early stages of mineralisation were produced in a temperature of 148–241°C, while that in the later stages occurred at 86–123°C. The early stage has been dated as 269±5 Ma, and this agrees with the ages of the other deposits of the district, which lay between 292 and 263 Ma, and the igneous rocks of the Peña Prieta stock (277±1 Ma), all which are of Permian age.The results of the studies carried out until now lead to the conclusion that Salamón is a Carlin-type gold deposit.     

Effects of waterborne nitrite on phase I-II biotransformation in channel catfish (Ictalurus punctatus).

The effects of waterborne nitrite (3 mg/l NO2) on channel catfish were studied to evaluate changes in hematological parameters and phase I-II biotransformation in liver slices. Nitrite-exposed fish had significantly higher methemoglobin, blood and liver nitrite, and significantly lower pO2 than control fish. Total phase I-mediated metabolism of 7-ethoxycoumarin (EC) was not altered in nitrite-exposed fish compared with control fish (291 +/- 43 and 312 +/- 20 pmol/mg/h, respectively). However, phase II glucuronosyltransferase-mediated metabolism of 7-hydroxycoumarin (HC), both as a phase I metabolite of EC and as a parent substrate, was elevated in nitrite-exposed fish (204 +/- 17 and 1007 +/- 103 pmol/mg/h, respectively) as compared to control fish (149 +/- 14 and 735 +/- 87 pmol/mg/h) (P < 0.05). Sulfotransferase-mediated metabolism of HC (as a metabolite of EC and as a parent substrate) was not notably altered in nitrite-exposed fish (95 +/- 16 and 617 +/- 33 pmol/mg protein/h, respectively) as compared with control fish (118 +/- 24 and 575 +/- 55 pmol/mg/h, respectively). These studies indicate that in vivo nitrite exposure and associated changes in hematological parameters do not appear to affect hepatic phase I EC biotransformation in channel catfish. However, subtle but significant changes in phase II glucuronidation, but not sulfation activity, were observed. The mechanism of these alterations is unclear. However, the data suggest that environmentally realistic concentrations of nitrite may affect the dynamics of conjugative metabolism in exposed fish.     

The role of constraints on joint hypocentre determination in seismotectonic studies

In this paper we show how the performance of the joint hypocentre determination (JHD) method can be improved, leading to reduced instability in cases close to singularity. The method has been extended by imposing a number of constraints introduced by other authors, and adding a new one. We tested the stability of the method and the relative advantages of the various constraints by simulating a geometrical space distribution of hypocentres recorded by a regional seismic network. We then applied this method to deep earthquakes that occurred in the Southern Tyrrhenian Sea subduction zone and to the seismicity of the Northern Apennines, which is moderately deeper than the typical shallow seismicity of the Apennines. The results obtained from the analysis of synthetic data and actual earthquakes confirm that the JHD method produces less scatter in the hypocentral determinations with respect to the standard locations. The main conclusion of our study is that we can significantly reduce the systematic mislocations that result from applying JHD to very clustered seismicity if we introduce the appropriate set of constraints.