Dynamic performance of twin curved cable‐stayed bridges

The dynamic behaviour of two curved cable‐stayed bridges, recently constructed in northern Italy, has been investigated by full‐scale testing and theoretical models. Two different excitation techniques were employed in the dynamic tests: traffic‐induced ambient vibrations and free vibrations. Since the modal behaviour identified from the two types of test are very well correlated and a greater number of normal modes was detected during ambient vibration tests, the validity of the ambient vibration survey is assessed in view of future monitoring. For both bridges, 11 vibration modes were identified in the frequency range of 0ndash;10Hz, being a one‐to‐one correspondence between the observed modes of the two bridges. Successively, the information obtained from the field tests was used to validate and improve 3D finite elements so that the dynamic performance of the two systems were assessed and compared based on both the experimental results and the updated theoretical models. Copyright © 2003 John Wiley & Sons, Ltd.     

A Reflection on Mg, Cd, Ca, Li and Si Isotopic Measurements and Related Reference Materials

This contribution aims to report the reflections we had with the scientific community during two international workshops on reference materials for stable isotopes in Davos (2002) and Nice (2003). After evaluating the isotopic homogeneity of some existing reference materials, based on either certificates, literature data or specific inter-laboratory rounds, we confirm these as primary reference materials or propose new ones relative to which stable isotope compositions should be reported. We propose DSM-3 for Mg, NIST SRM 915a for Ca, L-SVEC for Li and NBS28 for Si. Cadmium does not yet have a well identified delta zero material, although three commercial mono-elemental Cd solutions have yielded the same isotopic composition relative to one another. In order to scale the linearity of any mass spectrometer, some secondary reference materials are also proposed: Cambridge-1 solution for Mg, the "Münster-Cd" and JEPPIM Cd solutions for Cd and the "Big Batch" silicate for Si. The team from Nancy propose to prepare a mixed spike solution for Li isotopes. Well-characterised natural samples such as ocean or continental waters, diatoms, sponges, rocks and minerals are needed to validate the entire analytical procedure, particularly to take into account the effect of sample mineralisation and of chemical manipulations for elemental separation prior to analysis.     

Application of pyrolysis-GC/MS for rapid assessment of organic contamination in sediments from Barcelona harbor

Pyrolysis-GC/MS is advantageous as a tool for rapid sediment contamination assessment because of the small sample size required, minimal sample preparation and its ability to detect a wide variety of organic pollutants as well as naturally-occurring biological materials. Py-GC/MS was applied, together with determination of organic carbon, and major and minor element concentrations, to evaluate potentially contaminated sediments in the port of Barcelona (Spain) and the adjacent Llobregat River delta. Detected contaminant markers, most evident in the Old Port (Port Vell) area, included hopanes and alkylated PAHs (petroleum), sterenes (sewage), C₁₆–C₁₉ phenylalkanes (detergents) and parent PAHs (combusted fuels).     

Effect of suction on the mechanical behaviour of iron ore rock

The effect of suction on the behaviour of iron ore has been studied from both physical and mechanical points of view. The porosity and the suction phenomena have been analysed using different experimental techniques. Uniaxial compressive tests on partially saturated samples have shown that the suction is responsible for strength and cohesion improvement. Considering the theory of partially saturated porous soils of Coussy and Dangla (Mécanique des sols non saturés (2002 edn). Hermès Science: 2002; 390), we have proposed a constitutive law for partially saturated iron ore. The real increase in the apparent cohesion due to the capillary attraction forces is overestimated if the yield function is written in terms of effective stresses. The effect of the capillary cohesion has been modelled with a function in the expression of the apparent cohesion of the yield function. The effect of suction on the mechanical behaviour has been represented in the effective stresses space and in the total stresses space like the Alonso model (Géotechnique 1990; 40 :405–430). Copyright © 2005 John Wiley & Sons, Ltd.     

A multiobjective steepest descent method with applications to optimal well control

Multiobjective optimization deals with mathematical optimization problems where two or more objective functions (cost functions) are to be optimized (maximized or minimized) simultaneously. In most cases of interest, the objective functions are in conflict, i.e., there does not exist a decision (design) vector (vector of optimization variables) at which every objective function takes on its optimal value. The solution of a multiobjective problem is commonly defined as a Pareto front, and any decision vector which maps to a point on the Pareto front is said to be Pareto optimal. We present an original derivation of an analytical expression for the steepest descent direction for multiobjective optimization for the case of two objectives. This leads to an algorithm which can be applied to obtain Pareto optimal points or, equivalently, points on the Pareto front when the problem is the minimization of two conflicting objectives. The method is in effect a generalization of the steepest descent algorithm for minimizing a single objective function. The steepest-descent multiobjective optimization algorithm is applied to obtain optimal well controls for two example problems where the two conflicting objectives are the maximization of the life-cycle (long-term) net-present-value (NPV) and the maximization of the short-term NPV. The results strongly suggest the multiobjective steepest-descent (MOSD) algorithm is more efficient than competing multiobjective optimization algorithms.     

Anaerobic digestion of residual liquid effluent (brown juice) from a green biorefinery

This work studied the anaerobic digestion of brown juice, a liquid residual stream generated from biomass fractionation in a green biorefinery. Biomethane potential batch tests and inhibition studies of brown juice were performed during continuous processing in an upflow anaerobic sludge blanket reactor. Prolongation of the lag phase in the batch tests with increasing substrate/inoculum ratio suggested initial inhibition, which was, however, overcome by adaptation. This was indicated by high final methane yields, which were close to the theoretical maximum of up to 500 L-CH₄ kg-VS^?1, achieved after 15 days for most of the set-ups. Reactor operation at the organic loading rate of 13.9 g-COD L^?1 day^?1 and hydraulic retention time of 3 days revealed methane yields of 202 L-CH₄ kg-COD^?1 (307 L-CH₄ kg-VS^?1). Particle size analysis of the granules used in the reactor showed disintegration of the larger granules.