Optical Fiber Interferometers for Referencing Surface Benchmarks to Depth

—We have developed and operated optical fiber interferometers for monitoring displace ments within boreholes, as part of a program of crustal deformation measurement. These optical fiber strainmeters—a total of twelve instruments at two sites in southern California—were installed to sense the motion of the end-monuments of much longer baseline strainmeters and tiltmeters, allowing correction for any near-surface ground movement. One of the installations was specifically designed to investigate the distribution of deformation with depth, measuring over several borehole length-intervals from 5 m to 50 m. The displacements recorded over year-long time scales along these length intervals range up to 6 mm and show internal consistency and stability at the 50 μ m level. The use of these interferometers to provide correction signals for kilometer-scale crustal strain measurements has resulted in greatly improved records.     

The Sumba enigma: Is Sumba a diapiric fore-arc nappe in process of formation?

The anomalous updomed morphological expression of Sumba island, its enigmatic lack of strong Neogene deformation and the northward morphological indentation of southern Sumbawa and Flores require explanation.The stratigraphy of Sumba may be correlated with the Cretaceous to Miocene part of the Timor allochthon. The sedimentary and eruptive rock succession in Sumba shows remarkable similarities with the allochthonous Palelo, Wiluba and Cablac deposits of Timor. In both islands the Cretaceous parts of these sequences are regarded as characteristic of fore-arc deposits built on thin continental crust.The Timor nappe is interpreted as a 5 km thick tectonic flake of the Banda fore-arc thrust onto the Australian continental margin in the mid-Pliocene collision. The postulated Sumba nappe has not yet been thrust onto the Australian margin which, in the Sumba region, has not yet converged as close to the arc as in the Timor area. The postulated Sumba nappe is interpreted as a diapiric elongated dome of the Sunda fore-arc that is being squeezed by the converging margin of Australia against the volcanic islands of Sumbawa and Flores.The absence of indications on the seismic reflection profiles for the presence of the thrust fault of the Sumba nappe may perhaps be explained by the thrusts being nearly horizontal within flat-lying strata.The Savu thrust is correlated with the probably older (pre-Late Pliocene) Wetar Suture as a major southward dipping lithospheric rupture. East of 124°E, this suture does not seem to have moved much since the mid-Pliocene collision that emplaced the nappes on Timor. However, microearthquake data suggest some activity is continuing.     

Wollastonite at Nuliyam,Kerala, southern India: a reassessment of CO2-infiltration and charnockite formation at a classic locality

The occurrence of a charnockitised felsic gneiss adjacent to a marble/calc-silicate horizon at Nuliyam, southern India, has been cited in recent literature as a classic example of the dehydration of crustal rocks resulting from the advective infiltration of CO₂-rich fluids generated from a local carbonate source. Petrographic study of the Nuliyam calc-silicate, however, reveals it to consist of abundant wollastonite and scapolite and contain locally discordant veins rich in wollastonite. At the pressure—temperature conditions proposed for charnockite formation in recent studies, 5 kbar and 725°C, this wollastonite-bearing mineral assemblage was stable in the presence of a fluid phase only if X _CO2 was near 0.25 and could not have coexisted with the fluid causing biotite breakdown and charnockite development in adjacent rocks (X _CO2>0.85). The stable coexistence of wollastonite and scapolite prohibits the calc-silicate from being a source for fluid driving charnockitisation at the required P-T conditions. Textural observations such as the limited replacement of wollastonite by calcite+quartz symplectites and mosaics, are consistent with late fluid infiltration into the calc-silicate. The extensive isotopic, chemical and mineral abundance data of Jackson and Santosh (1992) are re-interpreted and integrated with these observations to develop a model involving the infiltration of an externally derived CO₂-rich fluid during high-temperature decompression. Increased charnockite development next to the calc-silicate has arisen because the calc-silicate acted as a relatively unreactive and impermeable barrier to fluid transport and caused fluid ponding beneath antiformal closures. The Nuliyam charnockite/calc-silicate locality is an example of a structural trap in a metamorphic setting rather than a site where charnockite formation can be attributed to local fluid sources.     

MODELLING LONG‐TERM SUMMER AND WINTER BALANCES AND THE CLIMATE SENSITIVITY OF STORBREEN,NORWAY

Measurements of winter balance (b_w) and summer balance (b_s) have been carried out at Storbreen since 1949. Here we apply a simple mass balance model to study the climate sensitivity and to reconstruct the mass balance series priorto 1949. The model is calibrated and validated with data from an automatic weather station (AWS) operating in the ablation zone of Storbreen since 2001. Regression analysis revealed that b_w was best modelled using precipitation data southwest of the glacier. Results from the model compared well with reported mass balance values for the period 1949–2006, obtained correlations (r) for b_w and b_s varied between 0.83 and 0.87 depending on model set up. Reconstruction of the mass balance series for the period 1924/1925–1948/1949 suggested a cumulative mass deficit of c. 30 m w.e. mainly due to highly negative summer balances, but also lower b_wthan the average for 1949–2006. Calculated change in specific mass balance for a ±1°C change in air temperature was ±0.55 m w.e., whereas a ±10 % increase in precipitation represented a change of ±0.20 m w.e. Model results further indicated that for a 2°C warming, the ablation season will be extended by c. 30 days and that the period of ice melt at the AWS location will increase from c. 40 to c. 80 days.     

The sedimentary and tectonic evolution of the Amur River and North Sakhalin Basin: new evidence from seismic stratigraphy and Neogene–Recent sediment budgets

The North Sakhalin Basin in the western Sea of Okhotsk has been the main site of sedimentation from the Amur River since the Early Miocene. In this article, we present regional seismic reflection data and a Neogene–Recent sediment budget to constrain the evolution of the basin and its sedimentary fill, and consider the implications for sediment flux from the Amur River, in particular testing models of continental‐scale Neogene drainage capture. The Amur‐derived basin‐fill history can be divided into five distinct stages: the first Amur‐derived sediments (>21–16.5 Ma) were deposited during a period of transtension along the Sakhalin‐Hokkaido Shear Zone, with moderately high sediment flux to the basin (71 Mt year^?1). The second stage sequence (16.5–10.4 Ma) was deposited following the cessation of transtension, and was characterised by a significant reduction in sediment flux (24 Mt year^?1) and widespread retrogradation of deltaic sediments. The third (10.4–5.3 Ma) and fourth (5.3–2.5 Ma) stages were characterised by progradation of deltaic sediments and an associated increase in sediment flux (48–60 Mt year^?1) to the basin. Significant uplift associated with regional transpression started during this time in southeastern Sakhalin, but the north‐eastward propagating strain did not reach the NE shelf of Sakhalin until the Pleistocene (<2.5 Ma). This uplift event, still ongoing today, resulted in recycling of older deltaic sediments from the island of Sakhalin, and contributed to a substantially increased total sediment flux to the adjacent basinal areas (165 Mt year^?1). Adjusted rates to discount these local erosional products (117 Mt year^?1) imply an Amur catchment‐wide increase in denudation rates during the Late Pliocene–Pleistocene; however, this was likely a result of global climatic and eustatic effects, combined with tectonic processes within the Amur catchment and possibly a smaller drainage capture event by the Sungari tributary, rather than continental‐scale drainage capture involving the entire upper Amur catchment.     

Discontinuity controlled probabilistic slope failure risk maps of the Altindag (settlement) region in Turkey

The evaluation of potential rock slope problems using stereographic projection techniques known as kinematic analysis is one of the most important parts of a slope stability investigation to be carried out in jointed rock media. In conventional stereoprojection techniques for the assessment of possible rock slope failures, the peak orientations of joints together with the slope geometry and the friction angle of the weakness planes are used. Other possible joint orientations which may be encountered in the rock media are ignored, although they belong to the group of joint peak orientations. In this study, nearly vertical jointed andesites cropped out at the Altindag settlement region in Ankara were studied in order to evaluate the relevance of this ignored discontinuity orientation data on slope stability. As a result, probabilistic risk maps for planar, toppling and wedge failures were produced using the kinematic rules and digital elevation model of the study area. The comparison of the distribution of the actual failures in the area and the probabilistic risk maps prepared for the study area revealed that all of the identified failures are found to be located in the higher risk zones on the probabilistic risk maps.