Active regions losing their moorings by subsurface reconnection

Eleven microwave spike events observed with the 2.6–3.8 GHz spectrometer of Beijing Astronomical Observatory (BAO) are analysed. The polarization degrees of spikes are variable, some spikes have frequency drift with the drift rate of several GHz s^–1. In particular, the time delay (8 ms) between the two polarization modes of spike is detected, which is different from previous results. According to the leading spot rule, we conclude that the o-modes arrive first. Moreover, the reversal of polarization sense versus frequency is also found. A change of the emission mode may be the cause of the polarization reversal.     

Simultaneous X-ray and IR variability in the quasar 3C 273

From a combination of high-quality X-ray observations from the NASA Rossi X-ray Timing Explorer ( RXTE ) and IR observations from the UK Infrared Telescope (UKIRT) we show that the medium-energy X-ray (3–20 keV) and near-IR fluxes in the quasar 3C 273 are highly correlated. It is widely believed that the X-ray emission in quasars like 3C 273 arises from Compton scattering of low-energy seed photons, and our observations provide the first reliable detection of correlated variations in 3C 273 between the X-ray band and any lower energy band. For a realistic electron distribution we demonstrate that it is probable that each decade of the seed-photon distribution from the mm to IR wavebands contributes roughly equally to the medium-energy X-ray flux. However, the expected mm variations are too small to be detected above the noise, probably explaining the lack of success of previous searches for a correlation between X-ray and mm variations. In addition, we show that the IR leads the X-rays by  0.75±0.25 d  . These observations rule out the 'External Compton' emission process for the production of the X-rays.     

Budapest's built environment in transition

The construction of major new buildings has been noticed in Budapest since the mid 1980s. New hotels, office blocks, housing projects and most recently shopping centres have become a prominent feature of the landscape in several districts of the city. The paper first outlines a conceptualisation of the `Transition' in terms of eastern Europe as a whole identifying internationalisation, Europeanisation and national government policies as key strands in a specific case of a process of change interpreted as the interaction of antecedent conditions and current processes. It then addresses the question of conceptualising the built environment in terms of the `Transition' and three `schools of thought' in geography stressing the urban morphogenesis approach. It thus poses the question of how radical a change has `occurred on the ground' since 1989–1990. Consequently the paper examines the transition in the built environment of Budapest under three principal headings: (a) the antecedent conditions of the built environment of Budapest by spatial structure, (b) the relationship between new buildings and current processes, (c) comparing models of the spatial structure of Budapest as a socialist city and as a post-socialist-(industrial) city or post-industrial (capitalist) city. It concludes that although the processes shaping the city's built environment have changed quite radically since 1990 the physical fabric of the city and its antecedent usage have strongly influenced the spatial impact of the current processes. Budapest is a post-socialist industrial city with capitalist forms fitted into it. The city is passing from socialist to capitalist processes in a way that suggests that morphological analysis has clear potential in theorising the relationship between the global and the local. This revised version was published online in July 2006 with corrections to the Cover Date.     

Regional‐scale sedimentation process models from airborne gamma ray remote sensing and digital elevation data

Airborne gamma ray survey data were used to provide information on potassium, thorium and uranium concentrations in surface soil and rock in arid central Australia. Spatial patterns in these radioelements allow tracing of paths of sediment at catchment scale. Survey elevation data are combined with contour data to produce digital elevation models for terrain analysis, tracing of sediment flow paths and modelling of extreme floods. Gamma ray data show consistent variation with slope, a limited range of drainage areas, and erosion/deposition models derived from the conservation of mass equation. Supply‐limited sediment transport models give a reasonable reproduction of observed radioelement distribution but some elements of the distribution pattern reflect the area inundated by 500–1000 year floods rather than the effects of simple downslope movement. Partial area sediment supply models are derived by downstream accumulation of erosion and deposition rates calculated using the conservation of mass equation with transport laws based on slope alone and stream power. Comparison with observed radioelement patterns suggests that both transport laws apply in different parts of the landscape. Regional‐scale sediment transport models will require a range of models depending on location in the landscape and event frequency. This approach may allow estimation of sediment delivery ratios. Copyright © 2001 John Wiley & Sons, Ltd.     

A parallel domain decomposition algorithm for coastal ocean circulation models based on integer linear programming

This paper presents a new parallel domain decomposition algorithm based on integer linear programming (ILP), a mathematical optimization method. To minimize the computation time of coastal ocean circulation models, the ILP decomposition algorithm divides the global domain in local domains with balanced work load according to the number of processors and avoids computations over as many as land grid cells as possible. In addition, it maintains the use of logically rectangular local domains and achieves the exact same results as traditional domain decomposition algorithms (such as Cartesian decomposition). However, the ILP decomposition algorithm may not converge to an exact solution for relatively large domains. To overcome this problem, we developed two ILP decomposition formulations. The first one (complete formulation) has no additional restriction, although it is impractical for large global domains. The second one (feasible) imposes local domains with the same dimensions and looks for the feasibility of such decomposition, which allows much larger global domains. Parallel performance of both ILP formulations is compared to a base Cartesian decomposition by simulating two cases with the newly created parallel version of the Stevens Institute of Technology’s Estuarine and Coastal Ocean Model (sECOM). Simulations with the ILP formulations run always faster than the ones with the base decomposition, and the complete formulation is better than the feasible one when it is applicable. In addition, parallel efficiency with the ILP decomposition may be greater than one.     

Geomorphic process from topographic form: automating the interpretation of repeat survey data in river valleys

The ability to quantify the processes driving geomorphic change in river valley margins is vital to geomorphologists seeking to understand the relative role of transport mechanisms (e.g. fluvial, aeolian, and hillslope processes) in landscape dynamics. High‐resolution, repeat topographic data are becoming readily available to geomorphologists. By contrasting digital elevation models derived from repeat surveys, the transport processes driving topographic changes can be inferred, a method termed ‘mechanistic segregation.’ Unfortunately, mechanistic segregation largely relies on subjective and time consuming manual classification, which has implications both for its reproducibility and the practical scale of its application. Here we present a novel computational workflow for the mechanistic segregation of geomorphic transport processes in geospatial datasets. We apply the workflow to seven sites along the Colorado River in the Grand Canyon, where geomorphic transport is driven by a diverse suite of mechanisms. The workflow performs well when compared to field observations, with an overall predictive accuracy of 84% across 113 validation points. The approach most accurately predicts changes due to fluvial processes (100% accuracy) and aeolian processes (96%), with reduced accuracy in predictions of alluvial and colluvial processes (64% and 73%, respectively). Our workflow is designed to be applicable to a diversity of river systems and will likely provide a rapid and objective understanding of the processes driving geomorphic change at the reach and network scales. We anticipate that such an understanding will allow insight into the response of geomorphic transport processes to external forcings, such as shifts in climate, land use, or river regulation, with implications for process‐based river management and restoration. Copyright © 2017 John Wiley & Sons, Ltd.     

Sediment and nutrient storage in a beaver engineered wetland

Beavers, primarily through the building of dams, can deliver significant geomorphic modifications and result in changes to nutrient and sediment fluxes. Research is required to understand the implications and possible benefits of widespread beaver reintroduction across Europe. This study surveyed sediment depth, extent and carbon/nitrogen content in a sequence of beaver pond and dam structures in South West England, where a pair of Eurasian beavers (Castor fiber) were introduced to a controlled 1.8 ha site in 2011. Results showed that the 13 beaver ponds subsequently created hold a total of 101.53 ± 16.24 t of sediment, equating to a normalised average of 71.40 ± 39.65 kg m². The ponds also hold 15.90 ± 2.50 t of carbon and 0.91 ± 0.15 t of nitrogen within the accumulated pond sediment. The size of beaver pond appeared to be the main control over sediment storage, with larger ponds holding a greater mass of sediment per unit area. Furthermore, position within the site appeared to play a role with the upper‐middle ponds, nearest to the intensively‐farmed headwaters of the catchment, holding a greater amount of sediment. Carbon and nitrogen concentrations in ponds showed no clear trends, but were significantly higher than in stream bed sediment upstream of the site. We estimate that >70% of sediment in the ponds is sourced from the intensively managed grassland catchment upstream, with the remainder from in situ redistribution by beaver activity. While further research is required into the long‐term storage and nutrient cycling within beaver ponds, results indicate that beaver ponds may help to mitigate the negative off‐site impacts of accelerated soil erosion and diffuse pollution from agriculturally dominated landscapes such as the intensively managed grassland in this study. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Annual bed‐elevation regime in the alluvial channel of Squamish River,Southwestern British Columbia,Canada

The aim of this study is to examine the annual regime of channel scour and fill by monitoring bed‐elevation changes in a reach of Squamish River in southwestern British Columbia, Canada. Sonar surveys of 13 river cross‐sections in a sandy gravel‐bed single‐channel study reach were repeated biweekly over a full hydrologic year (1995/6). The survey results show that bedload movement occurs as waves or pulses forming bedwaves that appear to maintain an overall coherence with movement downstream. These bedwaves propagate downstream by a mode here termed pulse scour and pulse fill, a process distinguished from the conventional mode of scour and fill commonly associated with flood events (here termed local scour and local fill). Bedwave celerity was estimated to be about 15·5 m d⁻¹ corresponding to a bedwave residence time in the study reach of almost one hydrologic year. The total amount of local bed‐elevation change ranged between 0·22 m and 2·41 m during the period of study. Analysis of the bed‐elevation and flow data reveals that, because of the bedwave phenomenon, there is no simple relation between the mean bed‐elevation and discharge nor any strong linear correlation among cross‐sectional behaviour. The bed‐elevation data also suggest that complex changes to the bed within a cross‐section are masked when the bed is viewed in one dimension, although no definitive trends in bed behaviour were found in the two‐dimensional analysis. Although a weak seasonal effect is evident in this study, the bed‐elevation regime is dominated by sediment supply‐driven fluctuations in bedload transport occurring at timescales shorter than the seasonal fluctuation in discharge. The study also indicates that bed‐elevation monitoring on Squamish River, and others like it, for purposes of detecting and measuring aggradation/degradation must take into account very considerable and normal channel‐bed variability operating at timescales from hours to months. Copyright © 2000 John Wiley & Sons, Ltd.