Upper mantle structure of the South American continent and neighboring oceans from surface wave tomography

We present a new three-dimensional SV-wave velocity model for the upper mantle beneath South America and the surrounding oceans, built from the waveform inversion of 5850 Rayleigh wave seismograms. The dense path coverage and the use of higher modes to supplement the fundamental mode of surface waves allow us to constrain seismic heterogeneities with horizontal wavelengths of a few hundred kilometres in the uppermost 400 km of the mantle.The large scale features of our tomographic model confirm previous results from global and regional tomographic studies (e.g. the depth extent of the high velocity cratonic roots down to about 200–250 km).Several new features are highlighted in our model. Down to 100 km depth, the high velocity lid beneath the Amazonian craton is separated in two parts associated with the Guyana and Guapore shields, suggesting that the rifting episode responsible for the formation of the Amazon basin has involved a significant part of the lithosphere. Along the Andean subduction belt, the structure of the high velocity anomaly associated with the sudbduction of the Nazca plate beneath the South American plate reflects the along-strike variation in dip of the subducting plate. Slow velocities are observed down to about 100 km and 150 km at the intersection of the Carnegie and Chile ridges with the continent and are likely to represent the thermal anomalies associated with the subducted ridges. These lowered velocities might correspond to zones of weakness in the subducted plate and may have led to the formation of “slab windows” developed through unzipping of the subducted ridges; these windows might accommodate a transfer of asthenospheric mantle from the Pacific to the Atlantic ocean. From 150 to 250 km depth, the subducting Nazca plate is associated with high seismic velocities between 5°S and 37°S. We find high seismic velocities beneath the Paraná basin down to about 200 km depth, underlain by a low velocity anomaly in the depth range 200–400 km located beneath the Ponta Grossa arc at the southern tip of the basin. This high velocity anomaly is located southward of a narrow S-wave low velocity structure observed between 200 and 500–600 km depth in body wave studies, but irresolvable with our long period datasets. Both anomalies point to a model in which several, possibly diachronous, plumes have risen to the surface to generate the Paraná large igneous province (LIP).     

Preliminary data on chemical changes in the Aral Sea during low-level periods from the last 9000 years

The withdrawal of the Aral Sea tributaries (Amu and Syr Daria) for cultures has led to significant falls of its level and an important increase in its salinity. During the Holocene, a succession of low and high water inputs occurred. Silty deposits correspond to the high levels and carbonates to the low levels. This study makes a distinction between the Syr Daria and the Amu Daria water inputs during low-level periods by using mineralogical and chemical compositions of the carbonates deposits. Waters from the Syr Daria are more sulphatic and have a low iron content in comparison with that of the Amu Daria. The Syr Daria was the major tributary around 7500, 4956 and 970 yr?BP, whereas around 6200 and 3610 yr?BP, inflow also from the Amu Daria is observed. To cite this article: L. Le Callonnec et al., C. R. Geoscience 337 (2005).     

Late Cenozoic transpressional ductile deformation north of the Nazca–South America–Antarctica triple junction

The southern Andes plate boundary zone records a protracted history of bulk transpressional deformation during the Cenozoic, which has been causally related to either oblique subduction or ridge collision. However, few structural and chronological studies of regional deformation are available to support one hypothesis or the other. We address along- and across-strike variations in the nature and timing of plate boundary deformation to better understand the Cenozoic tectonics of the southern Andes.Two east–west structural transects were mapped at Puyuhuapi and Aysén, immediately north of the Nazca–South America–Antarctica triple junction. At Puyuhuapi (44°S), north–south striking, high-angle contractional and strike-slip ductile shear zones developed from plutons coexist with moderately dipping dextral-oblique shear zones in the wallrocks. In Aysén (45–46°), top to the southwest, oblique thrusting predominates to the west of the Cenozoic magmatic arc, whereas dextral strike-slip shear zones develop within it.New ⁴⁰Ar–³⁹Ar data from mylonites and undeformed rocks from the two transects suggest that dextral strike-slip, oblique-slip and contractional deformation occurred at nearly the same time but within different structural domains along and across the orogen. Similar ages were obtained on both high strain pelitic schists with dextral strike-slip kinematics (4.4±0.3 Ma, laser on muscovite–biotite aggregates, Aysén transect, 45°S) and on mylonitic plutonic rocks with contractional deformation (3.8±0.2 to 4.2±0.2 Ma, fine-grained, recrystallized biotite, Puyuhuapi transect). Oblique-slip, dextral reverse kinematics of uncertain age is documented at the Canal Costa shear zone (45°S) and at the Queulat shear zone at 44°S. Published dates for the undeformed protholiths suggest both shear zones are likely Late Miocene or Pliocene, coeval with contractional and strike-slip shear zones farther north. Coeval strike-slip, oblique-slip and contractional deformation on ductile shear zones of the southern Andes suggest different degrees of along- and across-strike deformation partitioning of bulk transpressional deformation.The long-term dextral transpressional regime appears to be driven by oblique subduction. The short-term deformation is in turn controlled by ridge collision from 6 Ma to present day. This is indicated by most deformation ages and by a southward increase in the contractional component of deformation. Oblique-slip to contractional shear zones at both western and eastern margins of the Miocene belt of the Patagonian batholith define a large-scale pop-up structure by which deeper levels of the crust have been differentially exhumed since the Pliocene at a rate in excess of 1.7 mm/year.     

Hydrothermal alterations in the Echassières granitic cupola (Massif central,france)

Detailed petrographic and mineralogic investigations of an albite-lepidolite granite at Echassières (Massif Central, France; scientific deep drill program) shows the existence of hydrothermal stages which are closely related to the magmatic and structural history. According to fluid inclusion data, K-Ar datations and ¹⁸O/¹⁶O-D/H compositions of secondary minerals, two successive hydrothermal periods have been recognized. The early one (273–268 million years) produced a series of aluminous phyllosilicates: muscovite, pyrophyllite, donbassite, tosudite, kaolinite which are observed as vein deposits (<10 mm wide) and alteration products of primary minerals in wall-rocks. The vein system was sealed by monomineralic assemblages during a cooling period (400–150°C). This early hydrothermal alteration stage was controlled by interactions of rock with low salinity (1–10 wt% NaCl equivalent) fluids expelled from the granitic body during the cooling processes. The chemical properties of these fluids were the following: low pH, very low Mg and Fe and high Li, Na and K contents. Thermodynamic calculations show that the sequence pyrophyllite, Li-bearing donbassite, tosudite is mostly temperature dependent. From the chemical composition of secondary minerals and isotopic data it can be deduced that these fluids, which have a meteoric origin, have been expelled from the granite body during its cooling period and after interaction with it at high temperature. The late hydrothermal stage corresponds to deposits of fluorite and Fe-Mg rich illite (151 million years) in subvertical fractures. Temperature conditions did not exceed 250° C and fluids came through the surrounding metamorphic rocks into the granitic body. IIlite/smectite mixed-layer minerals have been identified in subvertical fractures which were opened during Tertiary periods. In the host micaschists, successive hydrothermal alterations took place during the cooling of the Beauvoir granite. Early magmatic fluids interacted with these micaschists. Locally, the metamorphic assemblage is replaced by a metasomatic one. Secondary topaz and (F, Li)-rich mica crystals were formed over a range of 450 of 150°C. Later hydrothermal fluids reacted with the country rocks to form phengite-biotite, chlorite-illite and kaolinite over a range of 300 to 150°C. Illite/smectite mixed-layer minerals crystallized in the roof micaschists and within the Beauvoir granite during the Tertiary alteration period. Meteoric water invaded open fractures producing supergene alteration mineral assemblages.     

Early Miocene adakite-like volcanism in the Balkuyumcu region, central Anatolia, Turkey: Petrology and geochemistry

The Balkuyumcu region, located in the southwestern part of Ankara in the Izmir-Ankara suture zone (central Anatolia, Turkey), consists of basic andesitic, andesitic, dacitic and rhyolitic rocks extruded during the Early Miocene (20–22 Ma) as a result of post-collisional volcanism. Balkuyumcu volcanic rocks can be divided into two groups on the basis of their mineralogy and composition: The basic andesitic (BA) and andesitic, dacitic and rhyolitic (ADR) groups. The ADR and BA group of rocks have adakite-like and calc-alkaline characteristics, respectively. The ADR group has higher SiO₂ content, Sr/Y and La/Yb ratios and low MgO, Mg#, Y and Yb contents than the BA group. Both groups have nearly the same Sr, Nd isotopic compositions and display similar normalized multi-element patterns with enrichments in LILE and LREE, depletions in Nb, Ti, Zr, P and a lack of Eu anomalies. Major, trace element and Sr, Nd isotopic data indicate that both groups of rocks were derived from the same source but affected by different magmatic processes during ascent. The adakite-like rocks may have been produced by partial melting of thickened lower continental crust. Fractional crystallization also played a major role in their formation. However, the BA group rocks were derived from partial melting of lower continental crust that was probably delaminated. These rocks appear to have had limited interaction with mantle peridodite during ascent to the surface.     

Risk assessment of groundwater pollution using sensitivity analysis and a worst-case scenario analysis

This paper illustrates how sensitivity analysis and a worst-case scenario analysis can be useful tools in risk assessment of groundwater pollution. The approach is applied to a study area in Hungary with several known groundwater pollution sources and nearby drinking water production wells. The main concern is whether the contamination sources threaten the drinking water wells of the area. A groundwater flow and transport model is set up to answer this question. Due to limited data availability, the results of this model are associated with large uncertainty. Sensitivity analysis and a worst-case scenario analysis are applied to estimate this uncertainty and build confidence in the model results.     

Flow dynamics at the origin of thin clayey sand lacustrine turbidites: Examples from Lake Hazar,Turkey

Turbidity currents and their deposits can be investigated using several methods, i.e. direct monitoring, physical and numerical modelling, sediment cores and outcrops. The present study focused on thin clayey sand turbidites found in Lake Hazar (Turkey) occurring in eleven clusters of closely spaced thin beds. Depositional processes and sources for three of those eleven clusters are studied at three coring sites. Bathymetrical data and seismic reflection profiles are used to understand the specific geomorphology of each site. X‐ray, thin sections and CT scan imagery combined with grain‐size, geochemical and mineralogical measurements on the cores allow characterization of the turbidites. Turbidites included in each cluster were produced by remobilization of surficial slope sediment, a process identified in very few studies worldwide. Three types of turbidites are distinguished and compared with deposits obtained in flume studies published in the literature. Type 1 is made of an ungraded clayey silt layer issued from a cohesive flow. Type 2 is composed of a partially graded clayey sand layer overlain by a mud cap, attributed to a transitional flow. Type 3 corresponds to a graded clayey sand layer overlain by a mud cap issued from a turbulence‐dominated flow. While the published experimental studies show that turbulence is damped by cohesion for low clay content, type 3 deposits of this study show evidence for a turbulence‐dominated mechanism despite their high clay content. This divergence may in part relate to input variables, such as water chemistry and clay mineralogy, that are not routinely considered in experimental studies. Furthermore, the large sedimentological variety observed in the turbidites from one coring site to another is related to the evolution of a sediment flow within a field‐scale basin made of a complex physiography that cannot be tackled by flume experiments.     

Physical partitioning of mercury in till: an example from central British Columbia, Canada

The physical partitioning of Hg into different grain size fractions of till is predominantly controlled by the primary bedrock mineralogy, the distance of glacial transport, and the relative stability of cinnabar (HgS) in the soil weathering environment. At sites located short distances down-ice from bedrock cinnabar mineralization, the highest Hg concentrations in unoxidized till were measured in the sand- and granule-sized fractions reflecting the abundance of cinnabar in those size ranges. Similar partitioning was measured in oxidized till as cinnabar was found to be relatively resistant to postglacial weathering. Discrete clay-sized cinnabar grains obtained from the unoxidized till were viewed under the scanning electron microscope and suggest that the terminal grade of cinnabar is in the clay-sized range. In till collected from areas barren of cinnabar mineralization, the highest Hg levels were found in the clay-sized fraction which is attributed to the high adsorption of Hg by clay minerals.     

Development of a rain‐on‐snow detection algorithm using passive microwave radiometry

Currently observed climate warming in the Arctic has numerous consequences. Of particular relevance, the precipitation regime is modified where mixed and liquid precipitation can occur during the winter season leading to rain‐on‐snow (ROS) events. This phenomenon is responsible for ice crust formation, which has a significant impact on ecosystems (such as biological, hydrological, ecological and physical processes). The spatially and temporally sporadic nature of ROS events makes the phenomenon difficult to monitor using meteorological observations. This paper focuses on the detection of ROS events using passive microwave (PMW) data from a modified brightness temperature (T_B) gradient approach at 19 and 37 GHz. The approach presented here was developed empirically for observed ROS events with coincident ground‐based PMW measurements in Sherbrooke, Quebec, Canada. It was then tested in Nunavik, Quebec, with the Advanced Microwave Scanning Radiometer for the Earth Observing System (AMSR‐E). We obtained a detection accuracy of 57, 71 and 89% for ROS detection for three AMSR‐E grid cells with a maximum error of 7% when considering all omissions and commissions with regard to the total number of AMSR‐E passes throughout the winter period. Copyright © 2016 John Wiley & Sons, Ltd.