Nutrient and microbial dynamics in eutrophying shrimp ponds affected or unaffected by vibriosis

A field survey was conducted on two intensive shrimp farms using similar technical practices: one (DF) historically affected by a vibriosis, the other (HC) in which the pathogen has been observed although no mortality event has occurred. Because historical data suggest that eutrophication process may directly or indirectly play a role in the disease outbreak, we focussed our research on its dynamics. A higher variability of the phytoplanktonic compartment linked to an imbalance in the molar N:P ratio was observed in farm DF compared to farm HC, implying a modification on the linkage between the bacteria and phytoplankton compartments at DF. The beginning of the mortality outbreak at DF followed a shift from pico- to nanophytoplankton. The organic matter mineralization process at the water-sediment interface may explain the disturbance observed in the water column during eutrophication. The consequences of this disturbance on shrimps’ health status and pathogen ecology are discussed.     

A restored section of the “southern Variscan realm” across the Corsica–Sardinia microcontinent

A complete section of the southern realm of the Variscan orogenic belt can be restored in the Corsica–Sardinia segment. Northern Corsica exposes a nonmetamorphosed Palaeozoic succession lying on Panafrican mica schist related to a microcontinent (most likely Armorica or from a microcontinent from the Hun superterrane) that had drifted away directly from Gondwana. These formations are thrust over the Variscan Internal Zone composed mainly of anatectic high-grade Palaeozoic formations that crop out from central Corsica to northern Sardinia; the metamorphic peak of the eclogite remnants has been dated at c. 420 Ma. The Variscan Internal Zone interpreted here as a collision zone, and also the Eovariscan suture, was intruded in Corsica by Mg–K granite from 345 to 335 Ma. The thrust of this Internal Zone onto the stack of parautochthonous nappes in central Sardinia is cross-cut by the Posada Asinara dextral shear zone. To the south, parautochthonous nappes overthrust the North-Gondwana margin which displays a possible Panafrican basement topped by an Iglesiente–Sulcis nonmetamorphic/anchimetamorphic Palaeozoic succession.     

Foreword

The main objective of this special issue of the Bulletin of Earthquake Engineering is to bring to the earthquake engineering community the outcomes of the research project QUAKER (Quantification and Reduction of Seismic Risk through the Application of Advanced Geotechnical Engineering Techniques) financed by European Commission under contract EVG1-CT-2002-00064.     

Compressional- and transpressional-stress pattern for Pliocene and Quaternary brittle deformation in fore arc and intra-arc zones (Andes of Central and Southern Chile)

Kinematic analysis of fault slip data for stress determination was carried out on Late Miocene to Quaternary rocks from the fore arc and intra-arc regions of the Chilean Andes, between 33° and 46° south latitudes. Studies of Neogene and Quaternary infilling (the Central Depression), as well as plutonic rocks of the North Patagonian Batholith along the Liquiñe–Ofqui Fault Zone, have revealed various compressional and/or transpressional states of stress. In the Pliocene, the maximum compressional stress (σ₁) was generally oriented east–west. During the Quaternary, the deformation was partitioned into two coeval distinctive states of stress. In the fore arc zone, the state of stress was compressional, with σ₁ oriented in a N–S to NNE–SSW direction. In the intra-arc zone the state of stress was transpressional with σ₁ striking NE–SW. Along the coast, in one site (37°30′S) the Quaternary strain deformation is extensional, with an E–W direction, which can be explained by a co-seismic crustal bending readjustment.     

Updating of Population Parameters and Credibility of Discriminant Analysis

The uncertainty of classification in discriminant analysis may result from the original characteristics of the phenomena studied, the approach of inferring population parameters, and the credibility of the parameters which are estimated by geologist or statistician. A credibility function and a significance function are proposed. Both can be used to appraise the uncertainty of classification. The former is involved with the uncertainty resulting from the errors in the reward-penalty matrix, while the latter may be involved with the uncertainty resulting from the original characteristics of the phenomena studied and the statistical approach. Inappropriate classified results may be originated from the bias estimates of population parameters (mean vector and covariance matrix), which are estimated by bias samples. These bias estimates can be updated by constraining the varying region of the mean vector. The equations for updating Bayesian estimates of the mean vector and the covariance matrix are demonstrated if the mean vector is restricted to a subregion of the entire real space. Results for a gas reservoir indicate that the discriminant rules based on the updated equations are more efficient than the traditional discriminant rules.     

Characterization of Chlorination By-products in Cooling Effluents of Coastal Nuclear Power Stations

In power stations, the cooling effluents are chlorinated to avoid excessive biofouling. Yet, this disinfecting treatment leads to the formation of halogenated by-products. In spite of possible toxicity of such compounds towards aquatic organisms, there is an evident lack of information on the formation of halogenated compounds in chlorinated seawater samples. So, this study was undertaken to identify and quantify halogenated compounds (i.e. trihalomethanes, haloacetonitriles, halophenols and haloacetic acids) in effluents from three French nuclear power stations. In addition, experiments conducted in the laboratory allowed the determination of the kinetics of formation of the main compounds detected: bromoform, dihaloacetonitrile, 2,4,6-tribromophenol and dibromoacetic acid. Good agreement was obtained between the experiments conducted either on site or in the laboratory. In particular, evidence was given on the formation of brominated compounds (due to the high concentrations of bromide ions in seawater).     

Evaluating the Potential of an Airborne Laser-scanning System for Measuring Volume Changes of Glaciers

Airborne laser scanning (ALS) is well suited for the production of digital elevation models (DEM), and can, in contrast to photographic methods, be used to acquire a DEM independently of surface texture and external light sources. ALS thus serves as a tool to generate DEMs of firn areas where photogram- metric methods often fail.
The potential of an integrated ALS system – comprising a laser scanner, precise differential global positioning system, and a gyro platform – for DEM generation of firn areas is currently being assessed. The Unteraargletscher, Bernese Alps, Switzerland, has been chosen as a test site. As part of a pilot project aimed at determining the mass balance distribution of that glacier without the use of in situ information, ALS measurements were conducted in autumn 1997. The DEM derived from laser measurements is extremely sensitive to the position and attitude of the aircraft. Currently the main work focuses on assessing and improving the system's accuracy by error modelling and by the development of error-correction algorithms.
Preliminary results from Unteraargletscher are presented, and the potential of this method for the generation of DEMs of firn areas is discussed.     

An Urban Surface Exchange Parameterisation for Mesoscale Models

A scheme to represent the impact of urban buildings on airflow in mesoscale atmospheric models is presented. In the scheme, the buildings are not explicitly resolved, but their effects on the grid-averaged variables are parameterised. An urban quarter is characterised by a horizontal building size, a street canyon width and a building density as a function of height. The module computes the impact of the horizontal (roof and canyon floor) and vertical (walls) surfaces on the wind speed, temperature and turbulent kinetic energy. The computation of the shortwave and longwave radiation, needed to compute the temperature of the urban surfaces, takes into account the shadowing and radiation trapping effects induced by the urban canyons. The computation of the turbulent length scales in the TKE equation is also modified to take into account the presence of the buildings.The parameterisation is introduced into a mesoscale model and tested in a bidimensional case of a city over flat terrain. The new parameterisation is shown to be able to reproduce the most important features observed in urban areas better than the traditional approach which is based only on the modification of the roughness length, thereby retaining the Monin–Obukhov similarity theory. The new surface exchange parameterisation is furthermore shown to have a strong impact on the dispersion characteristics of air pollutants in urban areas.     

Some aspects of determining the stable boundary layer depth from sodar data

The question of estimating the height of the stable boundary layer (SBL) based on digitalized vertical profiles of sodar signal intensity has been re-examined. A simple one-dimensional numerical boundary-layer model is used to compute vertical profiles of the temperature structure parameterC _T ² . It is shown that especially at the beginning of the night (when stratification is weak) one can not expect any significant profile structure in the upper part of the SBL if its depth is determined in terms of common turbulent height scales. From this it is concluded that the SBL-height will be underestimated early in the night when derived from the maximum gradient in the signal intensity profiles. Later in the night in contrast, the computations often show elevated maxima or even zones with reduced, and above them enhanced, vertical gradients ofC _T ² , from which a SBL-height can be deduced that compares well with other common height scales. The computed profiles ofC _T ² are shown to be in qualitative agreement with observed profiles of sodar signal intensity for several analysed cases from the HAPEX-MOBILHY experiment.Comparing different SBL-depth scales with sodar observations, it is demonstrated that most of them are often closely related to a sodar-derived SBL-height only during certain phases of the night. Thus the sodar-SBL-height can, after a transition period, be perhaps associated with the lower turbulent layer of the growing surface inversion during the first part and with the height of the low-level wind maximum during the second part of the night.     

LMDZ5B: the atmospheric component of the IPSL climate model with revisited parameterizations for clouds and convection

Based on a decade of research on cloud processes, a new version of the LMDZ atmospheric general circulation model has been developed that corresponds to a complete recasting of the parameterization of turbulence, convection and clouds. This LMDZ5B version includes a mass-flux representation of the thermal plumes or rolls of the convective boundary layer, coupled to a bi-Gaussian statistical cloud scheme, as well as a parameterization of the cold pools generated below cumulonimbus by re-evaporation of convective precipitation. The triggering and closure of deep convection are now controlled by lifting processes in the sub-cloud layer. An available lifting energy and lifting power are provided both by the thermal plumes and by the spread of cold pools. The individual parameterizations were carefully validated against the results of explicit high resolution simulations. Here we present the work done to go from those new concepts and developments to a full 3D atmospheric model, used in particular for climate change projections with the IPSL-CM5B coupled model. Based on a series of sensitivity experiments, we document the differences with the previous LMDZ5A version distinguishing the role of parameterization changes from that of model tuning. Improvements found previously in single-column simulations of case studies are confirmed in the 3D model: (1) the convective boundary layer and cumulus clouds are better represented and (2) the diurnal cycle of convective rainfall over continents is delayed by several hours, solving a longstanding problem in climate modeling. The variability of tropical rainfall is also larger in LMDZ5B at intraseasonal time-scales. Significant biases of the LMDZ5A model however remain, or are even sometimes amplified. The paper emphasizes the importance of parameterization improvements and model tuning in the frame of climate change studies as well as the new paradigm that represents the improvement of 3D climate models under the control of single-column case studies simulations.