Groundwater protection in fractured media: a vulnerability-based approach for delineating protection zones in Switzerland

A vulnerability-based approach for delineating groundwater protection zones around springs in fractured media has been developed to implement Swiss water-protection regulations. It takes into consideration the diversity of hydrogeological conditions observed in fractured aquifers and provides individual solutions for each type of setting. A decision process allows for selecting one of three methods, depending on the spring vulnerability and the heterogeneity of the aquifer. At the first stage, an evaluation of spring vulnerability is required, which is essentially based on spring hydrographs and groundwater quality monitoring. In case of a low vulnerability of the spring, a simplified method using a fixed radius approach (“distance method”) is applied. For vulnerable springs, additional investigations must be completed during a second stage to better characterize the aquifer properties, especially in terms of heterogeneity. This second stage includes a detailed hydrogeological survey and tracer testing. If the aquifer is assessed as slightly heterogeneous, the delineation of protection zones is performed using a calculated radius approach based on tracer test results (“isochrone method”). If the heterogeneity is high, a groundwater vulnerability mapping method is applied (“DISCO method”), based on evaluating discontinuities, protective cover and runoff parameters. Each method is illustrated by a case study.     

Electron microprobe U–Th–Pb monazite dating of the Transamazonian metamorphic overprint on Archean rocks from the Amapá Block, southeastern Guiana Shield, Northern Brazil

The Amapá Block, southeastern Guiana Shield, represents an Archean block involved in a large Paleoproterozoic belt, with evolution related to the Transamazonian orogenic cycle (2.26 to 1.95 Ga). High spatial resolution dating using an electron-probe microanalyzer (EPMA) was employed to obtain U–Th–Pb chemical ages in monazite of seven rock samples of the Archean basement from that tectonic block, which underwent granulite- and amphibolite-facies metamorphism. Pb–Pb zircon dating was also performed on one sample.Monazite and zircon ages demonstrate that the metamorphic overprinting of the Archean basement occurred during the Transamazonian orogenesis, and two main tectono-thermal events were recorded. The first one is revealed by monazite ages of 2096 ± 6, 2093 ± 8, 2088 ± 8, 2087 ± 3 and 2086 ± 8 Ma, and by the zircon age of 2091 ± 5 Ma, obtained in granulitic rocks. These concordant ages provided a reliable estimate of the time of the granulite-facies metamorphism in the southwest of the Amapá Block and, coupled with petro-structural data, suggest that it was contemporaneous to the development of a thrusting system associated to the collisional stage of the Transamazonian orogenesis, at about 2.10–2.08 Ga.The later event, under amphibolite-facies conditions, is recorded by monazite ages of 2056 ± 7 and 2038 ± 6 Ma, and is consistent with a post-collisional stage, marked by granite emplacement and coeval migmatization of the Archean basement along strike-slip shear zones.     

Composition and sources of dissolved and particulate PAH in surface waters from the Rhone delta (NW Mediterranean)

PAH were determined in surface waters from the Rhone delta in winter and summer 1987. Both particulate and dissolved phases were analyzed by GC and GC/MS. Concentrations of major unsubstituted compounds associated with particles varied from a few to 20 ng l⁻¹, or from 0.42 to 6.0 μg g⁻¹. The seasonal variations reflected higher inputs in winter resulting from the presence of highly PAH-enriched particles. Tetra- and penta-cyclic PAH with MW 202 and 252 predominated, which reflected a significant origin from pyrolytic processes. A rapid decrease of the level of higher MW PAH was observed seawards in both seasons. Study of the tricyclic compounds and their alkylated homologues demonstrated a mainly fossil origin in winter, whereas in summer a high heterogeneity of particles was observed. PAH in the dissolved phase were found at concentrations up to 31 and 50 ng l⁻¹ in summer and winter, respectively. These levels were much higher than those encountered in the corresponding particulate phases. PAH with MW 178 and 202 predominated, and the alkylated homologues of the tricyclic compounds showed a major fossil orgin in winter and a mixed origin in summer. In winter dissolved PAH were transported through the delta into the marine environment without significant losses.     

Pilot field experiment with canister-embedding clay under simulated repository conditions

Precompacted annular clay blocks surrounding a casing with a heater were emplaced in a borehole with 20 cm diameter and 2.8 m depth in granite. The heater was in operation for 8 months and raised the temperature of the clay to 176°C close to the casing. At the extraction the clay was completely water-saturated close to the rock and it had experienced an increased water content also close to the hot casing.

Mineralogical changes of the Ca-smectite clay were indicated by a slight increase in CEC and by an XRD-based conclusion that the content of low-charge smectite increased, while the initial content of kaolinite was reduced.     

Sedimentation, distribution and diagenesis of organic matter in a recent carbonate environment, Abu Dhabi, U.A.E.

In the modern hypersaline carbonate lagoon and sabkha sedimentary environments of Abu Dhabi (United Arab Emirates), three types of organic matter originate respectively from microbial mat, Avicennia mangrove, and Halodule lagoonal seagrass. The study of recent sedimentary processes and cross sections through the sabkha sediments lead to the definition of organo-sedimentary facies based on geochemical and sedimentological criteria. This permits the construction of an organo-sedimentary sequence which expresses the Holocene sedimentary record involving a transgressive and a regressive sequence. The various organic facies occur in both sequences.Heterogeneity within the individual organic facies reflects several factors, including sedimentation dynamics, mineral matrix, oxidation and reduction, and selective organic and mineral diagenesis. These parameters are discussed in terms of depositional environment and location within the organo-sedimentary sequence. Changes in distribution, quantity, and preservation potential of the buried organic matter are discussed in terms of sea level changes and sedimentary accretion rates.     

Very hot,very shallow hydrothermal dolomitization: An example from the Maritime Alps (north‐west Italy–south‐east France)

In the Maritime Alps (north‐west Italy – south‐east France), the Middle Triassic–lowermost Cretaceous platform carbonates of the Provençal Domain locally show an intense dolomitization. Dolomitized bodies, irregularly shaped and variable in size from some metres to hundreds of metres, are associated with tabular bodies of dolomite‐cemented breccias, cutting the bedding at a high angle, and networks of dolomite veins. Field and petrographic observations indicate that dolomitization was a polyphase process, in which episodes of hydrofracturing and host‐rock dissolution, related to episodic expulsion of overpressured fluids through faults and fracture systems, were associated with phases of host‐rock dolomitization and void cementation. Fluid inclusion analysis indicates that dolomitizing fluids were relatively hot (170 to 260°C). The case study represents an outstanding example of a fossil hydrothermal system, which significantly contributes to the knowledge of such dolomitization systems in continental margin settings. The unusually favourable stratigraphic framework allows precise constraint of the timing of dolomitization (earliest Cretaceous) and, consequently, direct evaluation of the burial setting of dolomitization which, for the upper part of the dolomitized succession, was very shallow or even close to the surface. The described large‐scale hydrothermal system was probably related to deep‐rooted faults, and provides indirect evidence of a significant earliest Cretaceous fault activity in this part of the Alpine Tethys European palaeomargin.     

Assessment of balanced burden-sharing in the 2050 EU climate/energy roadmap: a metamodeling approach

In this paper we propose a non-cooperative meta-game approach to designing and assessing climate agreements among 28 European countries that will be compatible with the EU 2050 climate target. Our proposed game model is identified through statistical emulation of a large set of numerical simulations performed with the computable general equilibrium model GEMINI-E3. In this game, the players are the 28 European countries, the payoffs are related to welfare losses due to abatements and the strategies correspond to the supply of emission rights on the European carbon market. We show it is possible to design a fair burden-sharing rule that equalizes welfare losses between countries to approximately 1.2 % of their discounted household consumption. The associated European CO₂ price in 2050 reaches $1100, a figure in line with previous studies. Lastly, the paper discusses various implementation issues of these types of negotiations and evaluates the cost of non-cooperation among EU countries.     

Influence du gypse sur la mesure de la teneur en eau et de la densite des marnes du keuper de lorraine

Can we justifiably use a special drying process for measuring water content and dry density on marls containing gypsum so as to avoid errors due to the thermal dehydration of gypsum? In order to give an answer to this question, the author studied the variation of the systematic errors in the measures with measurable parameters such as temperature, length of drying time, gypsum content and water content. He also examined the incertitude due to the non-numerical parameters of dispersion, such as the nature of the tested marls and the size of the gypsum inclusions.

These investigations allowed the author, within the numerical parameters studied, to determine the regions where the precision of the corrections possible justifies the use of special methods of testing. He also shows that the usual way of desiccation below 55°C, is reliable only within a very limited range of water content.