Longitudinal and temporal thermal patterns of the French Rh?ne River using Landsat ETM+ thermal infrared images

Understanding the thermal regime of rivers is a key issue for predicting ecosystem change in the context of global warming. However, water temperature is not only influenced by air temperature. To better highlight relative contribution of factors controlling water temperature, we used satellite thermal infrared (TIR) images from Landsat ETM+ to investigate longitudinal and temporal variations in thermal patterns of the French Rh?ne River. Because satellite TIR remote sensing is limited to large rivers, we used an automated water extraction technique to remove pixels contaminated by terrestrial surfaces. We calculated water surface temperatures of the 500?km long reach for 83 dates between 1999 and 2009. The average accuracy and uncertainty of our data, ±1.1 and ±0.4°C for reaches with more than 3?pixels across and ±1.4 and ±0.5°C for reaches with one to 3?pixels across, are comparable to other satellite TIR studies of rivers. Our results confirmed previous studies on the thermal impacts of tributaries and nuclear power plants on the Rh?ne, providing an understanding of their seasonal pattern and their longitudinal impact. We showed temperature differences of 0?C2°C within the largest hydroelectric bypass facilities between the bypass section and the canal, with Montélimar and Caderousse showing the most pronounced differences. Discussion points concern the potential impacts of tributaries and nuclear power plants on the spatio-temporal thermal patterns, as well as the factors responsible for thermal differences in the bypass facilities: length and minimum flow of the bypass section, and tributaries coming into this reach.     

Assessment of suspended sediment transport in four alpine watersheds (France): influence of the climatic regime

High‐frequency water discharge and suspended sediment concentration (SSC) databases were collected for 3 years on four contrasted watersheds: the Asse and the Bléone (two Mediterranean rainfall regime watersheds) and the Romanche and the Ferrand (two rainfall–snowmelt regime watersheds). SSCs were calculated from turbidity recordings (1‐h time step), converted into SSC values. The rating curve was calculated by means of simultaneous SSC measurement taken by water sampling and turbidity recording. Violent storms during springtime and autumn were responsible for suspended sediment transport on the Asse and the Bléone rivers. On the Ferrand and the Romanche, a large share of suspended sediment transport was also caused by local storms, but 30% of annual fluxes results from snowmelt or icemelt which occurred from April to October. On each watershed, SSC up to 50 g l^?1 were observed. Annual specific fluxes ranged from 450 to 800 t km^?2 year^?1 and 40–80% of annual suspended sediment fluxes occurred within 2% of the time. These general indicators clearly demonstrate the intensity of suspended sediment transport on these types of watersheds. Suspended sediment fluxes proved to be highly variable at the annual scale (inter‐annual variability of specific fluxes) as well as at the event scale (through a hysteresis loop in the SSC/Q relationship) on these watersheds. In both cases, water discharge and precipitations were the main processes involved in suspended sediment production and transport. The temporal and spatial variability of hydro‐meteorological processes on the watershed provides a better understanding of suspended sediment dynamics. Copyright © 2009 John Wiley & Sons, Ltd.     

Quantifying the Morphological Print of Bedload Transport

Bedload and river morphology interact in a strong feedback manner. Bedload conditions the development of river morphology along different space and time scales; however, by concentrating the flow in preferential paths, a given morphology controls bedload for a given discharge. As bedload is a non‐linear response of shear stress, local morphology is likely to have a strong impact on bedload prediction when the shear stress is averaged over the section, as is usually done. This was investigated by comparing bedload measured in different bed morphologies (step‐pool, plane bed, riffle‐pool, braiding, and sand beds), with bedload measured in narrow flumes in the absence of any bed form, used here as a reference. The initial methodology consisted of fitting a bedload equation to the flume data. Secondly, the morphological signature of each river was studied as the distance to this referent equation. It was concluded that each morphology affects bedload in a different way. For a given average grain shear stress, the larger the river, the larger the deviation from the flume transport. Narrow streams are those morphologies that behave more like flumes; this is particularly true with flat beds, whereas results deviate from flumes to a greater extent in step‐pools. The riffle‐pool's morphology impacts bedload at different levels depending on the degree of bar development, considered here through the ratio D₈₄/D₅₀ which is used as a proxy for the local bed patchiness and morphology. In braiding rivers morphological effects are important but difficult to assess because width is dependent on transport rate. Bed morphology was found to have negligible effects in sand bed rivers where the Shields stress is usually sufficiently high to minimize the non‐linearity effects when hydraulics is averaged over the section. Copyright © 2015 John Wiley & Sons, Ltd.     

Abrupt millennial variability and interdecadal-interstadial oscillations in a global coupled model: sensitivity to the background climate state

The origin and bifurcation structure of abrupt millennial-scale climate transitions under steady external solar forcing and in the absence of atmospheric synoptic variability is studied by means of a global coupled model of intermediate complexity. We show that the origin of Dansgaard-Oeschger type oscillations in the model is caused by the weaker northward oceanic heat transport in the Atlantic basin. This is in agreement with previous studies realized with much simpler models, based on highly idealized geometries and simplified physics. The existence of abrupt millennial-scale climate transitions during glacial times can therefore be interpreted as a consequence of the weakening of the negative temperature-advection feedback. This is confirmed through a series of numerical experiments designed to explore the sensitivity of the bifurcation structure of the Atlantic meridional overturning circulation to increased atmospheric CO₂ levels under glacial boundary conditions. Contrasting with the cold, stadial, phases of millennial oscillations, we also show the emergence of strong interdecadal variability in the North Atlantic sector during warm interstadials. The instability driving these interdecadal-interstadial oscillations is shown to be identical to that found in ocean-only models forced by fixed surface buoyancy fluxes, that is, a large-scale baroclinic instability developing in the vicinity of the western boundary current in the North Atlantic. Comparisons with modern observations further suggest a physical mechanism similar to that driving the 30–40?years time scale associated with the Atlantic multidecadal oscillation.     

Environmental controls on the development of Mississippian microbial carbonate mounds and platform limestones in southern Montagne Noire (France)

Late Mississippian carbonates in southern Montagne Noire are dominantly domical to laterally‐accreted microbial mounds in some formations, as well as stratiform microbial limestones occurring in hundreds of olistoliths within a flysch basin, constituting pieces of a giant puzzle that are used to help reconstruct a platform in a region that is no longer preserved. Petrographic data of limestone samples from 14 continuous long sections of olistoliths have been analyzed statistically, using multivariate clustering (Q‐mode) of the components/matrix/cement and canonical correspondence analysis that allow the reconstruction of the environmental parameters of carbonate microbial communities in space and time. Clustering analysis separated microbial and non‐microbial facies. The calculation of indices along the various axes from canonical correspondence analysis allows recognition of the controlling factors of the mounds and microbial growth as being turbidity, light penetration, bathymetry and storms. Turbidity and light penetration are the primary factors controlling the morphology of the microbial limestones. Representation of the light penetration and bathymetry indices on the stratigraphical sections defines two vertical environmental gradients. Light penetration can be subdivided into euphotic, euphotic–dysphotic and dysphotic‐aphotic conditions. The representation of the bathymetry allows the subdivision of samples into a deeper outer ramp, external mid‐ramp and internal mid‐ramp. The curve distance from the section base = f (index) suggests a cyclicity for the platform that cannot be compared with the onlap curve defined from other cratonic areas (Moscow Basin), and thus the cyclic succession of the Montagne Noire is interpreted to have been mostly tectonically‐controlled. Integration of the data allowed the reconstruction of the original Mississippian carbonate platform, where, up to the Mikhailovian, it appears to correspond to a platform morphology, with narrow shallow water facies and wide turbiditic systems, whereas the width of shallow‐water settings expanded during the Venevian to the Protvian, forming a ramp or distally‐steepened ramp with widespread microbial limestones.     

Nutrient and microbial dynamics in eutrophying shrimp ponds affected or unaffected by vibriosis

A field survey was conducted on two intensive shrimp farms using similar technical practices: one (DF) historically affected by a vibriosis, the other (HC) in which the pathogen has been observed although no mortality event has occurred. Because historical data suggest that eutrophication process may directly or indirectly play a role in the disease outbreak, we focussed our research on its dynamics. A higher variability of the phytoplanktonic compartment linked to an imbalance in the molar N:P ratio was observed in farm DF compared to farm HC, implying a modification on the linkage between the bacteria and phytoplankton compartments at DF. The beginning of the mortality outbreak at DF followed a shift from pico- to nanophytoplankton. The organic matter mineralization process at the water-sediment interface may explain the disturbance observed in the water column during eutrophication. The consequences of this disturbance on shrimps’ health status and pathogen ecology are discussed.     

A restored section of the “southern Variscan realm” across the Corsica–Sardinia microcontinent

A complete section of the southern realm of the Variscan orogenic belt can be restored in the Corsica–Sardinia segment. Northern Corsica exposes a nonmetamorphosed Palaeozoic succession lying on Panafrican mica schist related to a microcontinent (most likely Armorica or from a microcontinent from the Hun superterrane) that had drifted away directly from Gondwana. These formations are thrust over the Variscan Internal Zone composed mainly of anatectic high-grade Palaeozoic formations that crop out from central Corsica to northern Sardinia; the metamorphic peak of the eclogite remnants has been dated at c. 420 Ma. The Variscan Internal Zone interpreted here as a collision zone, and also the Eovariscan suture, was intruded in Corsica by Mg–K granite from 345 to 335 Ma. The thrust of this Internal Zone onto the stack of parautochthonous nappes in central Sardinia is cross-cut by the Posada Asinara dextral shear zone. To the south, parautochthonous nappes overthrust the North-Gondwana margin which displays a possible Panafrican basement topped by an Iglesiente–Sulcis nonmetamorphic/anchimetamorphic Palaeozoic succession.     

Foreword

The main objective of this special issue of the Bulletin of Earthquake Engineering is to bring to the earthquake engineering community the outcomes of the research project QUAKER (Quantification and Reduction of Seismic Risk through the Application of Advanced Geotechnical Engineering Techniques) financed by European Commission under contract EVG1-CT-2002-00064.     

Compressional- and transpressional-stress pattern for Pliocene and Quaternary brittle deformation in fore arc and intra-arc zones (Andes of Central and Southern Chile)

Kinematic analysis of fault slip data for stress determination was carried out on Late Miocene to Quaternary rocks from the fore arc and intra-arc regions of the Chilean Andes, between 33° and 46° south latitudes. Studies of Neogene and Quaternary infilling (the Central Depression), as well as plutonic rocks of the North Patagonian Batholith along the Liquiñe–Ofqui Fault Zone, have revealed various compressional and/or transpressional states of stress. In the Pliocene, the maximum compressional stress (σ₁) was generally oriented east–west. During the Quaternary, the deformation was partitioned into two coeval distinctive states of stress. In the fore arc zone, the state of stress was compressional, with σ₁ oriented in a N–S to NNE–SSW direction. In the intra-arc zone the state of stress was transpressional with σ₁ striking NE–SW. Along the coast, in one site (37°30′S) the Quaternary strain deformation is extensional, with an E–W direction, which can be explained by a co-seismic crustal bending readjustment.     

Updating of Population Parameters and Credibility of Discriminant Analysis

The uncertainty of classification in discriminant analysis may result from the original characteristics of the phenomena studied, the approach of inferring population parameters, and the credibility of the parameters which are estimated by geologist or statistician. A credibility function and a significance function are proposed. Both can be used to appraise the uncertainty of classification. The former is involved with the uncertainty resulting from the errors in the reward-penalty matrix, while the latter may be involved with the uncertainty resulting from the original characteristics of the phenomena studied and the statistical approach. Inappropriate classified results may be originated from the bias estimates of population parameters (mean vector and covariance matrix), which are estimated by bias samples. These bias estimates can be updated by constraining the varying region of the mean vector. The equations for updating Bayesian estimates of the mean vector and the covariance matrix are demonstrated if the mean vector is restricted to a subregion of the entire real space. Results for a gas reservoir indicate that the discriminant rules based on the updated equations are more efficient than the traditional discriminant rules.