Rangeland hydrology and erosion model (RHEM) enhancements for applications on disturbed rangelands

The rangeland hydrology and erosion model (RHEM) is a new process‐based model developed by the USDA Agricultural Research Service. RHEM was initially developed for functionally intact rangelands where concentrated flow erosion is minimal and most soil loss occurs by rain splash and sheet flow erosion processes. Disturbance such as fire or woody plant encroachment can amplify overland flow erosion by increasing the likelihood of concentrated flow formation. In this study, we enhanced RHEM applications on disturbed rangelands by using a new approach for the prediction and parameterization of concentrated flow erosion. The new approach was conceptualized based on observations and results of experimental studies on rangelands disturbed by fire and/or by tree encroachment. The sediment detachment rate for concentrated flow was calculated using soil erodibility and hydraulic (flow width and stream power) parameters. Concentrated flow width was calculated based on flow discharge and slope using an equation developed specifically for disturbed rangelands. Soil detachment was assumed to begin with concentrated flow initiation. A dynamic erodibility concept was applied where concentrated flow erodibility was set to decrease exponentially during a run‐off event because of declining sediment availability. Erodibility was estimated using an empirical parameterization equation as a function of vegetation cover and surface soil texture. A dynamic partial differential sediment continuity equation was used to model the total detachment rate of concentrated flow and rain splash and sheet flow. The enhanced version of the model was evaluated against rainfall simulation data for three different sites that exhibit some degree of disturbance by fire and/or by tree encroachment. The coefficient of determination (R²) and Nash–Sutcliffe efficiency were 0.78 and 0.71, respectively, which indicates the capability of the model using the new approach for predicting soil loss on disturbed rangeland. By using the new concentrated flow modelling approach, the model was enhanced to be a practical tool that utilizes readily available vegetation and soil data for quantifying erosion and assessing erosion risk following rangeland disturbance. Copyright © 2014 John Wiley & Sons, Ltd.     

Long-term fluid circulation in extensional faults in the central Catalan Coastal Ranges: P–T constraints from neoformed chlorite and K-white mica

The neoformation of chlorite and K-white mica in fault rocks from two main faults of the central Catalan Coastal Ranges, the Vallès and the Hospital faults, has allowed us to constrain the P–T conditions during fault evolution using thermodynamic modeling. Crystallization of M1 and M2 muscovite and microcline occured as result of deuteric alteration during the exhumation of the pluton (290 °C > T > 370 °C) in the Permian. After that, three tectonic events have been distinguished. The first tectonic event, attributed to the Mesozoic rifting, is characterized by precipitation of M3 and M4 phengite together with chlorite and calcite C1 at temperatures between 190 and 310 °C. The second tectonic event attributed to the Paleogene compression has only been identified in the Hospital fault with precipitation of low-temperature calcite C2. The shortcut produced during inversion of the Vallès fault was probably the responsible for the lack of neoformed minerals within this fault. Finally, the third tectonic event, which is related to the Neogene extension, is characterized in the Vallès fault by a new generation of chlorite, associated with calcite C4 and laumontite, formed at temperatures between 125 and 190 °C in the absence of K-white mica. Differently, the Hospital fault is characterized by the precipitation of calcite C3 during the syn-rift stage at temperatures around 150 °C and by low-temperature fluids precipitating calcites C5, C6 and PC1 during the post-rift stage. During the two extensional events (Mesozoic and Neogene), faults acted as conduits for hot fluids producing anomalous high geothermal gradients (50 °C/km minimum).     

The zircon-age distribution in metamorphic rocks of the Taratash block,Southern Urals (an initial provenance signal)

A concept for the interpretation of the initial provenance signal in rocks of the Taratash block (in the Southern Urals) using the zircon isotope dating of the Archean and Early Proterozoic igneous and metamorphic rocks was substantiated and carried out. Based on 132 zircon-age datings with a discordance of as much as 10%, a probability-density diagram was compiled first to compare these age data with those of detrital zircons from Lower Riphean sandstones of the Ai Formation and, secondly, with the probability density of zircon ages in metamorphic rocks of the Aleksandrovsk block, which is located to the east. The similarity of the distributions was verified using the Kolmogorov–Smirnov test.     

Impacts of Anthropogenic Land Use Changes on Nutrient Concentrations in Surface Waterbodies: A Review

Increased population leads to land use (LU) changes from natural to urban and agricultural LU. These disturbances not only decrease the natural treatment potential but they also worsen surface water quality (SWQ). The aim of this review is to assess studies about impacts of anthropogenic LU changes on levels of nutrient concentrations in surface waterbodies, highlighting the important parameters needed for an integrated simulation. The results reported in the literature are not always fully consistent. These contradictory results can sometimes be explained by field measurements under different climatic conditions, different features of landscapes, air deposition rates on ground surfaces, and groundwater flow interactions with surface water. Integrated modelling has been suggested to overcome these inconsistencies. Physical‐based and empirical models are the most popular approaches for LU‐SWQ studies. Generally, anthropogenic LU such as agricultural and urban areas usually enhances nutrient concentrations much more than natural lands such as forest and barren. Developing sustainable metropolitan areas instead of rural areas, establishing high‐standard wastewater treatment plants, and practicing efficient fertiliser application would ameliorate the poor nutrient conditions in SWQ. Riparian vegetation, grassed swales, and construction of artificial wetlands as buffer zones are the most promising natural water quality control measures.     

Remote sensing in hydrology

Remote sensing provides a means of observing hydrological state variables over large areas. The ones which we will consider in this paper are land surface temperature from thermal infrared data, surface soil moisture from passive microwave data, snow cover using both visible and microwave data, water quality using visible and near-infrared data and estimating landscape surface roughness using lidar. Methods for estimating the hydrometeorlogical fluxes, evapotranspiration and snowmelt runoff, using these state variables are also described.     

Integrating basin modeling with seismic technology and rock physics

We explore the link between basin modelling and seismic inversion by applying different rock physics models. This study uses the E‐Dragon II data in the Gulf of Mexico. To investigate the impact of different rock physics models on the link between basin modelling and seismic inversion, we first model relationships between seismic velocities and both (1) porosity and (2) effective stress for well‐log data using published rock physics models. Then, we build 1D basin models to predict seismic velocities derived from basin modelling with different rock physics models, in a comparison with average sonic velocities measured in the wells. Finally, we examine how basin modelling outputs can be used to aid seismic inversion by providing constraints for the background low‐frequency model. For this, we run different scenarios of inverting near angle partial stack seismic data into elastic impedances to test the impact of the background model on the quality of the inversion results. The results of the study suggest that the link between basin modelling and seismic technology is a two‐way interaction in terms of potential applications, and the key to refine it is establishing a rock physics models that properly describes changes in seismic signatures reflecting changes in rock properties.     

Performance evaluation of HWRF model during post monsoon tropical cyclone Nilofar

An accurate tropical cyclone track and intensity forecast is very important for disaster management. Specialized numerical prediction models have been recently used to provide high-resolution temporal and special forecasts. Hurricane Weather Research and Forecast (HWRF) model is one of the emerging numerical models for tropical cyclone forecasting. This study evaluates the performance of HWRF model during the post monsoon tropical cyclone Nilofar on the north Indian Ocean basin. The evaluation uses the best track data provided by the Indian Meteorological Department (IMD) and the Joint Typhoon Warning Centre (JTWC). Cyclone track, central pressure, and wind speed are covered on this evaluation. Generally, HWRF was able to predict the Nilofar track with track error less than 230 km within the first 66 h of forecast time span. HWRF predicted more intense tropical cyclone. It predicted the lowest central pressure to be 922 hPa while it reached 950 hPa according to IMD and 937 hPa according to JTWC. Wind forecast was better as it predicted maximum wind speed of 122 kt while it reached 110 and 115 kt according to IMD and JTWC, respectively.     

A spectrophotometric study of aqueous Au(III) halide-hydroxide complexes at 25-80 °C

The mobility and transport of gold in low-temperature waters and brines is affected by the aqueous speciation of gold, which is sensitive in particular to pH, oxidation and halide concentrations. In this study, we use UV-Vis spectrophotometry to identify and measure the thermodynamic properties of Au(III) aqueous complexes with chloride, bromide and hydroxide. Au(III) forms stable square planar complexes with hydroxide and halide ligands. Based on systematic changes in the absorption spectra of solutions in three binary systems NaCl-NaBr, NaCl-NaOH and NaBr-NaOH at 25 °C, we derived log dissociation constants for the following mixed and end-member halide and hydroxide complexes: [AuCl₃Br]⁻, [AuCl₂Br₂]⁻, [AuBr₃Cl]⁻ and [AuBr₄]⁻; [AuCl₃(OH)]⁻, [AuCl₂(OH)₂]⁻, [AuCl(OH)₃]⁻ and [Au(OH)₄]⁻; and [AuBr₃(OH)]⁻, [AuBr₂(OH)₂]⁻ and [AuBr(OH)₃]⁻. These are the first reported results for the mixed chloride-bromide complexes. Increasing temperature to 80 °C resulted in an increase in the stability of the mixed chloride-bromide complexes, relative to the end-member chloride and bromide complexes. For the [AuCl_(4−n)(OH)_n]⁻ series of complexes (n = 0-4), there is an excellent agreement between our spectrophotometric results and previous electrochemical results of Chateau et al. [Chateau et al. (1966)]. In other experiments, the iodide ion (I⁻) was found to be unstable in the presence of Au(III), oxidizing rapidly to I₂(g) and causing Au to precipitate. Predicted Au(III) speciation indicates that Au(III) chloride-bromide complexes can be important in transporting gold in brines with high bromide-chloride ratios (e.g., >0.05), under oxidizing (atmospheric), acidic (pH < 5) conditions. Native gold solubility under atmospheric oxygen conditions is predicted to increase with decreasing pH in acidic conditions, increasing pH in alkaline conditions, increasing chloride, especially at acid pH, and increasing bromide for bromide/chloride ratios greater than 0.05. The results of our study increase the understanding of gold aqueous geochemistry, with the potential to lead to new methods for mineral exploration, hydrometallurgy and medicine.