The structural inventory of a small complex impact crater: Jebel Waqf as Suwwan,Jordan

The investigation of terrestrial impact structures is crucial to gain an in‐depth understanding of impact cratering processes in the solar system. Here, we use the impact structure Jebel Waqf as Suwwan, Jordan, as a representative for crater formation into a layered sedimentary target with contrasting rheology. The complex crater is moderately eroded (300–420 m) with an apparent diameter of 6.1 km and an original rim fault diameter of 7 km. Based on extensive field work, IKONOS imagery, and geophysical surveying we present a novel geological map of the entire crater structure that provides the basis for structural analysis. Parametric scaling indicates that the structural uplift (250–350 m) and the depth of the ring syncline (<200 m) are anomalously low. The very shallow relief of the crater along with a NE vergence of the asymmetric central uplift and the enhanced deformations in the up‐range and down‐range sectors of the annular moat and crater rim suggest that the impact was most likely a very oblique one (~20°). One of the major consequences of the presence of the rheologically anisotropic target was that extensive strata buckling occurred during impact cratering both on the decameter as well as on the hundred‐meter scale. The crater rim is defined by a circumferential normal fault dipping mostly toward the crater. Footwall strata beneath the rim fault are bent‐up in the down‐range sector but appear unaffected in the up‐range sector. The hanging wall displays various synthetic and antithetic rotations in the down‐range sector but always shows antithetic block rotation in the up‐range sector. At greater depth reverse faulting or folding is indicated at the rim indicating that the rim fault was already formed during the excavation stage.     

Fuzzy inference guided cellular automata urban‐growth modelling using multi‐temporal satellite images

This paper presents a fuzzy inference guided cellular automata approach. Semantic or linguistic knowledge on urban development is expressed as fuzzy rules, based on which fuzzy inference is applied to determine the urban development potential for each pixel. A defuzzification process converts the development potential to the required neighbourhood development level, which is taken by cellular automata as initial approximation for its transition rules. Such approximations are updated through spatial calibration over townships and temporal calibration with multi‐temporal satellite images. Assessment of the modelling results is based on three evaluation measures: fitness and Type I and Type II errors. The approach is applied to model the growth of the city of Indianapolis, Indiana over a period of 30 years from 1973 to 2003. A fitness level of 100 ±20% with 30% average errors can be achieved for 80% of the townships in urban‐growth prediction.     

Heavy metals removal from synthetic wastewater by a novel nano-size composite adsorbent

The effects of varying operating conditions on metals removal from aqueous solution using a novel nano-size composite adsorbent are reported in this paper. Characterization of the composite adsorbent material showed successful production of carbon nanotubes on granular activated carbon using 1 % nickel as catalyst. In the laboratory adsorption experiment, initial mixed metals concentration of 2.0 mg/L Cu²⁺, 1.5 mg/L Pb²⁺ and 0.8 mg/L Ni²⁺ were synthesized based on metals concentration from samples collected from a semiconductor industry effluent. The effects of operation conditions on metals removal using composite adsorbent were investigated. Experimental conditions resulting in optimal metals adsorption were observed at pH 5, 1 g/L dosage and 60 min contact time. It was noted that the percentage of metals removal at the equilibrium condition varied for each metal, with lead recording 99 %, copper 61 % and nickel 20 %, giving metal affinity trend of Pb²⁺ > Cu²⁺ > Ni²⁺ on the adsorbent. Langmuir’s adsorption isotherm model gave a higher R² value of 0.93, 0.89 and 0.986 for copper, nickel and lead, respectively, over that of Freundlich model during the adsorption process of the three metals in matrix solution.     

Geoscience and sustainable catchment and resource management: the Ben Chifley Catchment case study

This article demonstrates a key role that geoscience and geoscientists could be playing in promoting sustainable catchment and resource management. A new geoscience-based approach supported by a landscape-genesis (LG) model was employed to provide an alternative approach for integrated catchment management and sustainable resource use and development. The Ben Chifley Catchment case study is used to explain the application of the approach and the landscape-genesis model. The study confirmed that lithological composition, tectonic and diagenetic processes, and landform were critical factors in determining the intrinsic properties and variation in soil type, land use, land capability, steepness of terrain, erosion, and resource degradation within the catchment. The landscape-genesis model, which is based on the geological and geomorphic genesis of the landscape, proved to be a powerful tool to predict the inherent carrying capacity and resilience of the various biophysical systems in the catchment. Although this approach is still in its infancy, its application has demonstrated that it has a strong potential in terms of undertaking sound integrated assessment, predicting potential resource degradation under different land uses, and developing sound management practices and solutions to advance the goal of ecological sustainability.     

Active crustal shortening in NE Syria revealed by deformed terraces of the River Euphrates

The Africa–Arabia plate boundary comprises the Red Sea oceanic spreading centre and the left‐lateral Dead Sea Fault Zone (DSFZ); however, previous work has indicated kinematic inconsistency between its continental and oceanic parts. The Palmyra Fold Belt (PFB) splays ENE from the DSFZ in SW Syria and persists for ～400 km to the River Euphrates, but its significance within the regional pattern of active crustal deformation has hitherto been unclear. We report deformation of Euphrates terraces consistent with Quaternary right‐lateral transpression within the PFB, indicating anticlockwise rotation (estimated as 0.3° Ma^?1 about 36.0°N 39.8°E) of the block between the PFB and the northern DSFZ relative to the Arabian Plate interior. The northern DSFZ is shown to be kinematically consistent with the combination of Euler vectors for the PFB and the Red Sea spreading, resolving the inconsistency previously evident. The SW PFB causes a significant earthquake hazard, previously unrecognized, to the city of Damascus.     

Calibration of the Hydrological Simulation Program Fortran (HSPF) model using automatic calibration and geographical information systems

Calibrating a comprehensive, multi‐parameter conceptual hydrological model, such as the Hydrological Simulation Program Fortran model, is a major challenge. This paper describes calibration procedures for water‐quantity parameters of the HSPF version 10·11 using the automatic‐calibration parameter estimator model coupled with a geographical information system (GIS) approach for spatially averaged properties. The study area was the Grand River watershed, located in southern Ontario, Canada, between 79° 30′ and 80° 57′W longitude and 42° 51′ and 44° 31′N latitude. The drainage area is 6965 km². Calibration efforts were directed to those model parameters that produced large changes in model response during sensitivity tests run prior to undertaking calibration. A GIS was used extensively in this study. It was first used in the watershed segmentation process. During calibration, the GIS data were used to establish realistic starting values for the surface and subsurface zone parameters LZSN, UZSN, COVER, and INFILT and physically reasonable ratios of these parameters among watersheds were preserved during calibration with the ratios based on the known properties of the subwatersheds determined using GIS. This calibration procedure produced very satisfactory results; the percentage difference between the simulated and the measured yearly discharge ranged between 4 to 16%, which is classified as good to very good calibration. The average simulated daily discharge for the watershed outlet at Brantford for the years 1981–85 was 67 m³ s^?1 and the average measured discharge at Brantford was 70 m³ s^?1. The coupling of a GIS with automatice calibration produced a realistic and accurate calibration for the HSPF model with much less effort and subjectivity than would be required for unassisted calibration. Copyright © 2002 John Wiley & Sons, Ltd.     

An Interacting Model of Dark Energy in Brans-Dicke Theory

In this paper it is shown that in non-minimally coupled Brans-Dicke theory containing a self-interacting potential, a suitable conformal transformation can automatically give rise to an interaction between the normal matter and the Brans-Dicke scalar field. Considering the scalar field in the Einstein frame as the quintessence matter, it has been shown that such a non-minimal coupling between the matter and the scalar field can give rise to a late time accelerated expansion for the universe preceded by a decelerated expansion for very high values of the Brans-Dicke parameter ω. We have also studied the observational constraints on the model parameters considering the Hubble and Supernova data.     

Peculiarities of the kinematics of the west scotia mid-oceanic ridge

The first map of the acoustic basement and a new map of the C⁴-C¹² chrons are made for the area of the paleospreading West Scotia Ridge. The analysis of the constructed maps and the calculations showed that the bottom growth in the ridge axes began in the southeast in the interval of chron C^12r (31.116–33.266 Ma B.P.). In the period of chron C11r (30.217–30.627 Ma), a hundred-kilometer northwestward jump of the spreading axis occurred. The maximal values of the bottom growth (about 6.3 cm/yr) were in the interval of chrons C6–C6B (18.748–22.546 Ma); then, the spreading began to fade. In the time of chron C3n.1r (3.300–4.493 Ma B.P.), the axis of the paleo-mid-oceanic ridge died. The spreading was accompanied with northeastward propagating of the axes, and the propagating proper had an impulse character.     

The separation of Ceylon from Antarctica

The geometry of the junction between Ceylon and Antarctica during the Gondwanaland breakup is still under discussion. Analysis of the available geological-geophysical materials has allowed the peculiarities of Ceylon separation from Antarctica to be characterized, the new paleogeodynamical reconstruction to be elaborated, and a prognosis of the tectonic structure and mineral resources in the areas of Antarctic coast that were adjacent to Ceylon to be made.