Partial melting kinetics of plagioclase-diopside pairs

Partial melting experiments on plagioclase (An₆₀) and diopside have been carried out using pairs of large crystals to investigate textures and kinetics of melting. The experiments were done at one atmosphere pressure as a function of temperature (1,190–1,307° C) and time (1.5–192 h). Melting took place mainly at the plagioclase-diopside contact planes. Reaction zones composed of fine mixtures of calcic plagioclase and melt were developed from the surface of the plagioclase crystal inward. There exists a critical temperature, below which only a few % melting can occur over the duration of the experiments. This sluggish melting is caused by slow NaSi-CaAl diffusion in plagioclase, because the plagioclase crystal must change its composition to produce albite-rich cotectic melts. Diffusion in the solid also affects the chemical composition of the melts. During initial melting, potassium is preferentially extracted from plagioclase because K-Na diffusion in plagioclase is faster than that of NaSi-CaAl. This also causes a shift in the cotectic compositions. Above the critical temperature, on the other hand, melting is promoted by a metastable reaction in which the plagioclase composition does not change, and which produces melts with compositional gradients along the original An₆₀-diopside tie line. The critical temperature is determined by the intersection of the cotectic and the An₆₀-diopside tie line. Interdiffusion coefficients of plagioclase-diopside components in the melt are estimated from melting rates above the critical temperature by using a simplified steady-state diffusion model (e.g., 10^–8 cm²/sec at 1,300° C).Many examples of reaction zones due to partial melting have been described as spongy or fingerprint-like textures in xenoliths. Metastable melting above the critical temperature is considered to take place in natural melting where there is a high degree of melting. However, we cannot exclude the possibility of disequilibrium created by sluggish melting controlled by diffusion in the minerals. If melting occurs close to the solidus, this process can be important even for partial melting in the upper mantle.     

Dissolution kinetics of plagioclase in the melt of the system diopside-albite-anorthite,and origin of dusty plagioclase in andesites

The textures and kinetics of reaction between plagioclase and melts have been investigated experimentally, and origin of dusty plagioclase in andesites has been discussed. In the experiments plagioclase of different compositions (An₉₆, An₆₁, An₅₄, An₂₃, and An₂₂) surrounded by glasses of six different compositions in the system diopside-albite-anorthite was heated at temperatures ranging from 1,200 to 1,410° C for 30 min to 88 h. Textures were closely related to temperature and chemical compositions. A crystal became smaller and rounded above the plagioclase liquidus temperature of the starting melt (glass) and remained its original euhedral shape below the liquidus. Whatever the temperature, the crystal-melt interface became rough and often more complicated (sieve-like texture composed of plagioclase-melt mixture in the scale of a few m was developed from the surface of the crystal inward; formation of mantled plagioclase) if the crystal is less calcic than the plagioclase in equilibrium with the surrounding melt, and the interface remained smooth if the crystal is more calcic than the equilibrium plagioclase. From these results the following two types of dissolution have been recognized; (1) a crystal simply dissolves in the melt which is undersaturated with respect to the phase (simple dissolution), and a crystal is partially dissolved to form mantled plagioclase by reaction between sodic plagioclase and calcic melt (partial dissolution). The amount of a crystal dissolved and reacted increased proportional to the square root of time. This suggests that these processes are controlled by diffusion, probably in the crystal.Mantled plagioclase produced in the experiments were very similar both texturally and chemically to some of the so-called resorbed plagioclase in igneous rocks. Chemical compositions and textures of plagioclase phenocrysts in island-arc andesites of magma mixing origin have been examined. Cores of clear and dusty plagioclase were clacic (about An₉₀) and sodic (about An₅₀), respectively. This result indicates that dusty plagioclases were formed by the partial melting due to reaction between sodic plagioclase already precipitated in a dacitic magma and a melt of intermediate composition in a mixed magma during the magma mixing.     

Sulfur isotope study of Quaternary volcanic rocks from the Japanese Islands Arc

The sulfide and sulfate contents and their δ³⁴S values were determined in Quaternary volcanic rocks from the Japanese Islands Arc. The total sulfur contents are much lower (less than 40 ppm) and the δ³⁴S values are higher (+4.4 ± 2.1) than those of ocean-floor basalts (800 ± 100 ppm and +0.8 ± 0.5, respectively; Moore and Fabbi, 1971; Sakaiet al., 1982). Lateral variations of both sulfur content and δ³⁴S values were observed in the four volcanic belts in Japan. In the Northeast Japan belt, the sulfur content (30 ± 10 ppm) of the rocks in the inner zone (the Japan Sea side) is 3 to 5 times that in the outer zone (the Pacific side), although the δ³⁴S values of the two zones are almost the same (+4.3 ± 1.0). The δ³⁴S values for the two belts in West Japan are on the average 2%. higher than those of East Japan.This study suggests that the primary magmas that formed the island arc volcanic rocks are initially depleted in sulfur (<120 ppm) and enriched in ³⁴S ($\text{δ}{}^{34}\text{S: +5 ～ +7}$) compared to ocean-floor tholeiitic basalts which formed at mantle under oceanic region. This indicates that the upper-mantle is heterogeneous in sulfur content and isotope composition.     

Antiferromagnetic transition of fayalite under high pressure studied by Mössbauer spectroscopy

Néel temperature (Tm _N of α-Fe₂SiO₄ (fayalite) was measured as a function of pressure by means of Mössbauer spectroscopy in the pressure range 0–16 Gpa. High pressure was generated using a clamp-type miniature diamond anvil cell which was inserted into a cryostat. The Néel temperature increased linearly with increasing pressure at a rate of dT _N /dp=2.2±0.2 K/GPa. The result is discussed on the basis of the model proposed for the magnetic structure of fayalite by Santoro et al. (1966). The observed dT _N /dp suggests that the superexchange interactions vary as the ?10/3 power of the volume while the volume dependence of the direct exchange interactions is positive and small.     

Structural and fabric analyses of basal slip zone of the Jin’nosuke-dani landslide, northern central Japan: its application to the slip mechanism of decollement

We describe in detail the deformation structures and textures of a large-scale landslide body that developed in the Betto-dani Valley in northern central Japan. We studied the shape-preferred orientation of clasts and clay flakes and the development of internal shear planes within the slip zone of the landslide. The slip has an average rate of 5–10 cm/year under the overburden pressure of approximately 1.6 MPa; these values are similar to those of the proto-decollement zone of the Nankai accretionary prism in SW Japan. The anisotropy of magnetic susceptibility of samples obtained from the slip zone reveals that the long axes of clay flakes define an imbricate structure. The slip was due to a long-term periodical creep, which occurs during the thaw seasons with an average slip rate of 0.16–0.32 μm/min. During the creep, the long axes of grains including clay flakes in the slip zone are developed from parallel to perpendicular to the slip direction. The observed textures provide a clue to elucidate the deformation textures and process in the decollement zone of the Nankai prism.     

Sea navigation, challenges and potentials in South East Asia: an assessment of suitable sites for a shipping canal in the South Thai Isthmus

This paper discusses the situation of sea navigation in south East Asia focusing on the Strait of Malacca. The strait links the Indian and Pacific oceans, which is considered one of the busiest in several narrow channels around the world. The paper highlights the significance of the strait to global maritime trade, volume of traffic, and rising environmental and social consequences in the strait. A feasibility study of constructing a new shipping canal in the South Thai Kra Isthmus as an alternative option of Malacca route had been studied since 19th century. The paper explores suitable sites for a potential shipping canal in the Kra Isthmus using physiographic spatial data i.e., elevation, sea charts, geology, soils and river systems. Each spatial data was considered as a separate decision variable for site evaluation. Separate evaluation criterions were prepared for each variable based on shipping canal requirements. Overlaying the maps in GIS environment, the variables were carefully evaluated, and five geographic sites for the canal were derived. The length of the shipping canal over sea and land was computed for each site. Site B located in south of Ranong and Chumphon provinces, was the shortest one, whereas site C in Surat Thani, Pangnna and Krabi provinces was the longest. However, each site consisted of benefits and constraints.     

Raman spectra of methane hydrate up to 86 GPa

High-pressure Raman studies of methane hydrate were performed using a diamond anvil cell in the pressure range of 0.1–86 GPa at room temperature. Raman spectra of the methane molecules revealed that new softened intramolecular vibration mode of ν ₁ appeared at 17 GPa and that the splitting of vibration mode of ν ₃ occurred at 15 GPa. The appearance of these two modes indicates that an intermolecular attractive interaction increases between the methane molecules and the host water molecules and between the neighboring methane molecules. These interactions might result in the exceptional stability of a high-pressure structure, a filled ice Ih structure (FIIhS) for methane hydrate, up to 40 GPa. At 40 GPa, a clear change in the slope of the Raman shift versus pressure occurred, and above 40 GPa the Raman shift of the vibration modes increased monotonously up to 86 GPa. A previous XRD study showed that the FIIhS transformed into another new high-pressure structure at 40 GPa. The change in the Raman spectra at 40 GPa may be induced by the transition of the structure.     

Carbonate deposits on submerged seamounts in the northwestern Pacific Ocean

Abstract   The lithology of shallow-water carbonates collected from 19 sites on 16 seamounts in six areas of the northwestern Pacific Ocean using the Deep-sea Boring Machine System are described. The areas include the Amami Plateau, Daito Ridge, Oki-Daito Ridge, Urdaneta Plateau, Kyushu-Palau Ridge and Ogasawara Plateau. Chronological constraint is provided by calcareous nannofossil biostratigraphy, planktonic foraminiferal biostratigraphy, larger foraminiferal biostratigraphy and strontium (Sr) isotope stratigraphy. Large amounts of shallow-water carbonates accumulated on the seamounts during the Oligocene, a relatively cool period, whereas limited carbonate deposits formed during the Early Miocene, a relatively warm period. This might indicate that deposition of shallow-water carbonates on seamounts in the northwestern Pacific Ocean was not necessarily controlled by climatic conditions, but was related to volcanism and tectonics that served as foundations for reef/carbonate-platform formation. Remarkable differences in biotic composition exist between Cretaceous and Cenozoic shallow-water carbonates. Late Cretaceous shallow-water carbonates are distinguished by the occurrence of rudists, solenoporacean algae and microencrusters. Middle Eocene to Early Oligocene shallow-water carbonates are dominated by Halimeda or nummulitid and discocyclinid larger foraminifers. Scleractinian corals became common from the Oligocene onward. Nongeniculate coralline algae and larger foraminifers were common to abundant throughout the Eocene to the Pleistocene. The replacement of major carbonate producers in the shallow-water carbonate factory during post-Cretaceous time is in accordance with previous studies and is considered to reflect a shift in seawater chemistry.