Outbreak of warm water from the Kuroshio South of Japan

During the concentrated observation (April–May 1988) conducted as a part of the Ocean Mixed Layer Experiment (OMLET) in the sea area south of Japan, a conspicuous outbreak of warm water occurred from the large-meander region of the Kuroshio toward the southwest in the direction of the former Ocean Weather Station “T”. A series of NOAA-AVHRR infrared images clearly showed the process of this event. A surface buoy-mooring system deployed in this experiment recorded the arrival of this outbreak of water, in terms of the rise of sea-surface temperature (SST) of 1.5°C and the flow of warm water of 1.5kt toward the northwest at “T”. We studied this phenomenon by combining time series of infrared SST images with the oceanographic data obtained by two research vessels. The warm water was about 100 m deep in the section at 137°E along the edge of the Off-Shikoku Warm Water. It was estimated that about twenty outbreaks of this kind in a year can compensate a large heat loss to the atmosphere above this ocean region.     

Bachelor-modon type eddies and isolated eddies near the coast on anf-plane

The behavior of isolated meso-scale eddies near the coastal boundary is studied by numerical experiments based on the quasi-geostrophic equation in a basin on an f-plane. First, Bachelor-modon type eddies are investigated as an idealized model of isolated eddies close to the wall. The first-mode Bachelor-modon type eddy is found to be robust enough to recover its original form even after it turns a corner of the basin. In contrast, the second mode is unstable; it tends to move away from the wall and finally splits into two eddies proceeding in opposite directions along the wall. An initially Gaussian eddy a little distant from the boundary interacts with a Bachelor-modon type eddy translating along the boundary, sometimes resulting in vortex merging and pairing just as in the head-on collision of two modons on a beta-plane. It is found that an initially Gaussian eddy located moderately close to the coast rapidly settles down to a steadily translating eddy, which can be approximated remarkably well by a first-mode Bachelor-modon type eddy not only in appearance but also in translation velocity within an error of about 20%.     

A note on internal wavetrains and the associated undulation of the sea surface observed upstream of seamounts

An internal wavetrain, generated by a tidal current in superposition with the Tsushima Warm Current, has been observed by use of an acoustic echo-sounder upstream of the Shichiri-Ga-Sone Seamounts in the East Tsushima Strait of the Japan Sea. The sea surface above the internal wavetrain was simultaneously observed and was found to be undulated at the wavelength of the internal wave.     

Difference characteristics of sea surface temperature observed by GLI and AMSR aboard ADEOS-II

This study compares infrared and microwave measurements of sea surface temperature (SST) obtained by a single satellite. The simultaneous observation from the Global Imager (GLI: infrared) and the Advanced Microwave Scanning Radiometer (AMSR: microwave) aboard the Advanced Earth Observing Satellite-II (ADEOS-II) provided an opportunity for the intercomparison. The GLI-and AMSR-derived SSTs from April to October 2003 are analyzed with other ancillary data including surface wind speed and water vapor retrieved by AMSR and SeaWinds on ADEOS-II. We found no measurable bias (defined as GLI minus AMSR), while the standard deviation of difference is less than 1°C. In low water vapor conditions, the GLI SST has a positive bias less than 0.2°C, and in high water vapor conditions, it has a negative (positive) bias during the daytime (nighttime). The low spatial resolution of AMSR is another factor underlying the geographical distribution of the differences. The cloud detection problem in the GLI algorithm also affects the difference. The large differences in high-latitude region during the nighttime might be due to the GLI cloud-detection algorithm. AMSR SST has a negative bias during the daytime with low wind speed (less than 7 ms⁻¹), which might be related to the correction for surface wind effects in the AMSR SST algorithm.     

Validity of sea surface temperature observed with the TRITON buoy under diurnal heating conditions

In order to investigate the validity of buoy-observed sea surface temperature (SST), we installed special instruments to measure near-surface ocean temperature on the TRITON buoy moored at 2.07°N, 138.06°E from 2 to 13 March 2004, in addition to a standard buoy sensor for the regular SST measurement at 1.5-m depth. Large diurnal SST variations were observed during this period, and the variations of the temperatures at about 0.3-m depth could be approximately simulated by a one-dimensional numerical model. However, there was a notable discrepancy between the buoy-observed 1.5-m-depth SST (SST_1.5m) and the corresponding model-simulated temperature only during the daytime when the diurnal rise was large. The evaluation of the heat balance in the sea surface layer showed that the diurnal rise of the SST_1.5m in these cases could not be accounted for by solar heating alone. We examined the depth of the SST_1.5m sensor and the near-surface temperature observed from a ship near the buoy, and came to the conclusion that the solar heating of the buoy hull and/or a disturbance in the temperature field around the buoy hull would contribute to the excessive diurnal rise of the SST_1.5m observed with the TRITON buoy. However, the temperature around the hull was not sufficiently homogenized, as suggested in a previous paper. For the diurnal rise of the SST_1.5m exceeding 0.5 K, the daytime buoy data became doubtful, through dynamics that remain to be clarified. A simple formula is proposed to correct the unexpected diurnal amplitude of the buoy SST_1.5m.     

The sudden disappearance of a dark filament observed on October 26, 1989

We present H monochromatic and spectroscopic observations of the sudden disappearance of a dark filament located near the center of the solar disk on October 26, 1989. The event was not associated with the flare activity. The dark filament first disintegrated into two loop-like components, and then each component successively showed ascending motion with a velocity greater than 30 km s^–1. Comparison of the H pictures taken before and after the start of this event suggests that the dark filament was originally composed of two magnetic flux loops.     

X-ray observation of the Jovian impacts of comet Shoemaker - Levy 9

An ASCA observation of the Jovian impact of the comet Shoemaker-Levy 9 is reported. Four impacts of H, L, Q1 and R were observed and four impacts of B, C, G, and Q2 were observed within 60 minutes after their impacts. No significant flaring of X-ray emission was observed. Upper limit X-ray fluxes of 90 % confidence level, averaged 5 minutes just after the impacts, were 2.4 × 10^–13 erg sec^–1 cm^–2, 3.5 × 10^–13 erg sec^–1 cm^–2, 1.6 × 10^–13 erg sec^–1 cm^–2 and 2.9 × 10^–13 erg sec^–1 cm^–2 for the impacts of H, L, Q1 and R, respectively, in the 0.5(0.7 for H and Q1)–10 keV energy range. However, a hint of X-ray enhancement around Jupiter from July 17 to July 19 was detected with about 2 6 × 10^–14 erg sec^–1 cm^–2 in the 0.5–10 keV energy range.     

Performance of the complete travel-time equation of state at simultaneous high pressure and temperature

The complete travel-time equation of state (CT-EOS) is presented by utilizing thermodynamics relations, such as; $$K_T = K_S (1 + \alpha \gamma T)^{ - 1} , \gamma = \frac{{\alpha K_S }}{{\rho C_P }}, \left. {\frac{{\partial C_P }}{{\partial P}}} \right)_T = - \frac{T}{\rho }\left[ {\alpha ^2 + \left. {\frac{{\partial \alpha }}{{\partial T}}} \right)_P } \right], etc.$$ The CT-EOS enables us to analyze ultrasonic experimental data under simultaneous high pressure and high temperature without introducing any assumption, as long as the density, or thermal expansivity, and heat capacity are also available as functions of temperature at zero pressure. The performance of the CT-EOS was examined by using synthesized travel-time data with random noise of 10^?5 and 10^?4 amplitude up to 4 GPa and 1500 K. Those test conditions are to be met with the newly developed GHz interferometry in a gas medium piston cylinder apparatus. The results suggest that the combination of the CT-EOS and accurate experimental data (10^?4 in travel time) can determine thermodynamic and elastic parameters, as well as their derivatives with unprecedented accuracy, yielding second-order pressure derivatives (?² M/?P ²) of the elastic moduli as well as the temperature derivatives of their first-order pressure derivatives ?² M/?P?T). The completeness of the CT-EOS provides an unambiguous criterion to evaluate the compatibility of empirical EOS with experimental data. Furthermore because of this completeness, it offers the possibility of a new and absolute pressure calibration when X-ray (i.e., volume) measurements are made simultaneously with the travel-time measurements.     

Experimental study on the velocity of fragments in collisional breakup

The motion of fragments following a catastrophic destruction by either a normal or an oblique impact at 2.5–2.9 km sec^?1 into cubic and spherical basalt targets was studied with a high-speed framing camera. Velocities at the antipodes of the targets vary as (E/M)^0.75 (E = impact energy; M = target mass) and are lower than 200 m sec^?1 at E/M ? 10⁹ ergs g^?1. Excluding fine-grained particles from the impact site, 70 to 80% by mass fraction of the fragments have velocities lower than twice the antipodal velocity. Comminution and ejection energies wasted in this mass fraction were a few percent of the impact energy at E/M ? 5 × 10⁷ ergs g^?1. During a catastrophic impact into asteroids some of the fragmented bodies can be reconcentrated by mutual gravitation.     

Dendritic cordierite in argillaceous hornfels from the Toki area,Gifu Prefecture,central Japan

Dendritic cordierite occurs in argillaceous hornfels from the Toki area, Gifu Prefecture, Japan. The cordierite crystal consists of c-arms elongated parallel to the c-axes and a-arms perpendicular to the c-axis. The latter arms could be divided into six kinds of untwinned a-arms with different growth directions elongated parallel to the respective a-axis and twinned a-arms elongated parallel to the (110) twin plane. A-arms branch out from c-arms or other a-arms with different growth directions and c-arms sometimes branch out from a-arms, leading to a tree-like structure. Each of the c-arms contains three kinds of domains related by a three-fold axis about the c-axis. These domains are irregularly distributed without any relation to the shape of the c-arm and the domain boundaries are of zigzag shape. This domain arrangement suggests that c-arms grew as hexagonal cordierite and were later transformed into orthorhombic cordierite. The fact that each untwinned a-arm has a fixed growth direction to its orientation suggests that the a-arms grew as an orthorhombic cordierite. From the growth directions of c- and a-arms, orthorhombic and hexagonal phases are considered to grow preferentially along the c- and a-axes, respectively. The branching of a new arm is explained by nucleation on an old arm with a different preferred growth direction. The preferential growth is discussed in terms of a significant chemical potential gradient of the cordierite component. This has been preserved in the mineral zoning observed in the matrix around the cordierite porphyroblast.