Petrochemical evidence for off-ridge magmatism in a back-arc setting from the Yakuno ophiolite, Japan

Abstract The Permian ophiolite emplaced in the Yakuno area, Kyoto Prefecture, consists of metavolcanic sequences, metagabbro and a troctolitic intrusion. The metavolcanics are associated with thick mudstone through a contact that shows the flowage of lava over unconsolidated mud layers on the sea floor. The metavolcanics and metagabbro have rare earth element (REE) patterns that are similar to enriched (E)‐ and transitional (T)‐types ([La/Yb]_N = 0.77–11.2) of mid‐oceanic ridge basalts (MORB), whereas their Nb/La ratios (0.40–1.20) are as low as those of back‐arc basin basalts (BABB). Cr‐spinels in the metavolcanic rocks have Cr? of 40–73 and an Fe³⁺? of 9–24, numbers which are comparable to the values of BABB. These lines of evidence suggest that the Yakuno ophiolite originated more likely from an early stage back‐arc basin rather than from an oceanic plateau, as has been suggested by some researchers. The troctolitic body that intrudes as a 0.5‐km long lens in the metagabbro is composed of troctolite, olivine gabbro and microgabbro. The troctolite is marked by an olivine–plagioclase crystallization sequence, different from the commonly observed olivine–clinopyroxene sequence in other mafic/ultramafic cumulates of the Yakuno ophiolite. The microgabbro, with a composition close to that of the parental magma of the troctolite, is depleted in light REE ([La/Yb]_N = 0.18–0.55) so that it has an REE pattern that mimics normal (N)‐type MORB. The interstitial clinopyroxene of the troctolite has highly variable TiO₂ contents (0.2–1.4 wt%), which is interpreted to result from postcumulus crystallization of heterogeneous intercumulus melts. The troctolitic intrusion may represent a late stage intrusion that formed in an off‐ridge environment during sea floor spreading of the back‐arc basin. The geochemical variation observed in the Yakuno ophiolite, ranging from N‐ to E‐MORB affinities, reflects the changes in both mantle source compositions and processes involved in magma generation during the evolution of the back‐arc basin.     

Tomographic imaging of seismic velocity structure in and around the Onikobe volcanic area, northeastern Japan: implications for fluid distribution

We estimated three-dimensional P- (V_p) and S-wave velocity (V_s) and V_p/V_s structures in and around the Onikobe volcanic area, northeastern Japan, by local travel time tomography. We used travel time data from source and receiver pairs located within and outside the study area, which plays an important role in obtaining the optimum ray coverage and in elucidating the deeper structure more accurately. Detailed information on deeper structures is essential for imaging the complete volcanic system from the magmatic source zone through areas of shallow hydrothermal circulation. More than 50 000 travel time data for the P-waves and 35 000 for the S-waves were used to image the velocity structure. Our results show the following dominant features: (1) two conduits in the upper crust with low V_p and low V_s indicative of H₂O-rich fluid pathways: one lying beneath Naruko volcano, the other beneath the focal area of the 1962 Northern Miyagi earthquake (M6.5); (2) an underlying broad region in the lower crust with low V_p, low V_s and high V_p/V_s, suggestive of a zone of partial melt, from which the fluids in (1) are derived; and (3) low V_p/V_s areas near the surface of the Sanzugawa and Onikobe calderas, suggesting a diffuse vapor-saturated cap.     

A rate‐dependent constitutive model of high damping rubber bearings: modeling and experimental verification

In this study, a constitutive model of high damping rubber bearings (HDRBs) is developed that allows the accurate representation of the force–displacement relationship including rate‐dependence for shear deformation. The proposed constitutive model consists of two hyperelastic springs and a nonlinear dashpot element and expresses the finite deformation viscoelasticity laws based on the classical Zener model. The Fletcher–Gent effect, manifested as high horizontal stiffness at small strains and caused by the carbon fillers in HDRBs, is accurately expressed through an additional stiffness correction factor α in the novel strain energy function. Several material parameters are used to simulate the responses of high damping rubber at various strain levels, and a nonlinear viscosity coefficient η is introduced to characterize the rate‐dependent property. A parameter identification scheme is applied to the results of the multi‐step relaxation tests and the cyclic shear tests, and a three‐dimensional function of the nonlinear viscosity coefficient η with respect to the strain, and strain rate is thus obtained. Finally, to investigate the accuracy and feasibility of the proposed model for application to the seismic response assessment of bridges equipped with HDRBs, an improved real‐time hybrid simulation (RTHS) test system based on the velocity loading method is developed. A single‐column bridge was used as a test bed and HDRBs was physically tested. Comparing the numerical and RTHS results, advantage of the proposed model in the accuracy of the predicted seismic response over comparable hysteretic models is demonstrated. Copyright © 2016 John Wiley & Sons, Ltd.     

Monitoring the deep western boundary current in the western North Pacific by echo intensity measured with lowered acoustic Doppler current profiler

Oxidation of iron and manganese ions is predominant in the oxygen-rich deep western boundary current (DWBC) within the Pacific Ocean. By the faster removal of particulate iron hydroxide and manganese oxide, densities of the particulate matters are considered to be lower in the DWBC than the interior region. To detect the density variation of suspended particles between the DWBC and interior regions, we analyzed echo intensity (EI) measured in the western North Pacific by hydrographic casts with a 300 kHz lowered acoustic Doppler current profiler (LADCP) in a whole water column. At depths greater than 3000 m (~ 3000 dbar), EI is almost uniformly low between 12°N and 30°N but peaks sharply from 30°N to 35°N to a maximum north of 35°N. EI is found to be anomalously low in the DWBC compared to the background distribution. The DWBC pathways are identifiable by the low EI and high dissolved oxygen concentration. EI data by LADCPs and other acoustic instruments may be used to observe the temporal variations of the DWBC pathways.

     

Characteristics of Gold Mineralization at the Ciurug Vein, Pongkor Gold-Silver Deposit, West Java, Indonesia

Abstract. The Pongkor Gold‐Silver Mine, Bogor district, West Java, is approximately 80 km southwest of Jakarta. The gold and silver mineralization in the area is present in a deposit consisting of an epithermal vein‐system named individually as the Pasir Jawa, Gudang Handak, Ciguha, Pamoyanan, Kubang Cicau, and Ciurug veins. In the area studied, rocks of basaltic‐andesitic composition are dominated by volcanic breccia and lapilli tuff, with andesite lava and siltstone present locally. The hydrothermal alteration minerals in the Ciurug area are typical of those formed from acid to near‐neutral pH thermal waters, where the acid alteration is distributed from the surface to shallow depth, while the near‐neutral pH alteration becomes dominant at depths. The Ciurug vein shows four main mineralization stages where each discrete stage is characterized by a specific facies; these are, from early to late: carbonate‐quartz, manganese carbonate‐quartz, banded‐massive quartz and gray sulfide‐quartz facies. The major metallic minerals are pyrite, sphalerite, chalcopyrite and galena; they occur in almost each mineralization stage. Bornite was observed only in the southern part of the Ciurug vein at a depth of 515 m, and the occurrence of this mineral is reported here for the first time. Electrum and silver sulfides (mostly acanthite) are minor, whereas silver sulfosalts, stromeyerite and mckinstryite, and covellite are in trace amounts. The silver sulfosalts have compositional ranges of pearceite, antimon‐pearceite and polybasite. Most of the electrum occurs coexisting with other sulfide minerals, as inclusions in pyrite grains, with very little as inclusions in chalcopyrite or sphalerite. Gold grades within the Ciurug vein vary from 1.2 to hundreds of ppm, where the highest gold grade occurs in the latest mineralization stage in a thin sulfide band in vein quartz. Fluid inclusion microthermometry of calcite and quartz indicates deposition throughout the mineralized veins in the range from 170 to 230d?C and from low salinity fluids (predominantly lower than 0.2 wt% NaCl equiv.). Fluid inclusions occur with features of boiling.     

Comparison of rhyolites from continental rift,continental arc and oceanic island arc: Implication for the mechanism of silicic magma generation

We discuss the chemical compositions of rhyolites from three distinct tectonic settings: (i) the continental rift from Ethiopia (both Oligocene–Miocene and Quaternary rhyolites); (ii) the early Miocene continental arc of Japan (the Mt Wasso rhyolites related to the rifting of the Japan Sea); and (iii) the oceanic Izu–Bonin Island Arc. The comparison reveals that the oceanic island arc rhyolites have high contents of CaO, Al₂O₃, and Sr, and extremely low abundance of trace elements including K₂O. In contrast, the Ethiopian continental rift rhyolites are characterized by low contents of CaO, Al₂O₃, and Sr, and high contents of K₂O, and are enriched in the whole range of trace elements. The continental arc Mt Wasso rhyolites are apparently low in Nb content, although they display similar chemical trends to those of the Ethiopian rhyolites. This obvious difference in the chemical signatures of the rhyolites from the three tectonic settings is the consequence of their derivation from different sources. The implication of this result is that fractional crystallization processes were dominant in the rift‐related rhyolites both from continental rift and continental arc regardless of the prevailing tectonic setting and the nature of the crust (age, thickness, composition), whereas the oceanic island arc rhyolites may form through partial melting of young, mafic crust.     

Assessment of shallow groundwater in Lake Nyos catchment (Cameroon,Central-Africa): implications for hydrogeochemical controls and uses

In 1986, carbon dioxide gas exploded from Lake Nyos and killed about 1,800 people. After that disaster, various administrative and research activities have been conducted to mitigate subsequent disasters. However, none of those endeavors have characterized the groundwater chemistry to identify hydrogeochemical processes that control the water chemistry, and the quality of the water for domestic and agricultural uses that support the lives of un-official resettlers around Lake Nyos. Conventional hydrochemical techniques coupled with statistical and graphical analysis were therefore employed to establish the baseline hydrochemical conditions, assess processes controlling solutes distribution in shallow groundwater in the Lake Nyos catchment and explore its usability. Groundwater samples were analyzed for their physical and chemical properties. The wide ranges of electrical conductivity and total dissolved solid values reveal the heterogeneous distribution of groundwater within the watershed. The relative abundance of major dissolved species was Ca > Mg > Na > K for cations and HCO₃ >>> Cl > SO₄ > NO₃ for anions. Piper diagram classified almost all water samples into mixed CaMg–HCO₃ water type. Major ion geochemistry reveals that, in addition to silicates weathering (water–rock interaction), ion exchange processes regulate the groundwater chemistry. Principal component analysis supports the occurrence of water rock interaction. Hierarchical cluster analysis showed that the chemistry of groundwater in the study area is controlled by three main factors, and suggests no hydraulic connectivity between deep lake water and groundwater in the catchment. The quality assessment of the groundwater showed that groundwater parameters are within the acceptable limit of the World Health Organization and Nigeria guidelines for drinking and domestic uses, and water found to be good for irrigation.     

Growth history and formation environments of ferromanganese deposits on the Philippine Sea Plate, northwest Pacific Ocean

Abstract   Hydrogenetic ferromanganese crusts are widespread on the floor of the northwestern Pacific Ocean, south and east of the Japanese Islands, despite vigorous tectonic activity, such as subduction and back-arc spreading, since at least the Mid-Paleogene over the Philippine Sea Plate region and nearby. The crusts occur mainly at water depths shallower than 3000 m, but also at greater depths of up to 6000 m. Fine-scale ¹⁰Be/⁹Be dating was undertaken on several 5–10 cm thick hydrogenetic ferromanganese crusts sampled from different geological environments, including inactive submarine volcanoes, tectonic escarpments and abandoned rifts. The results indicate that the crusts have grown at relatively constant rates of 4–7 mm/my without any significant time breaks. These uniform and constant growth rates suggest that the basins have been exposed constantly to oxygenated bottom waters since their formation in the Middle Miocene ( ca 15 Ma) or earlier. Local geological or oceanographic environmental changes might have slowed or increased some of the growth rates resulting in correlation of some internal structures. The Philippine Sea Plate region could have economic potential in areas of thick hydrogenetic ferromanganese crusts over a wide range of water depths.     

Crustal structure and origin of the northeast Japan arc

Abstract Northeast Japan is a typical island arc region and its topographic arrangement reflects the geophysical characteristics of the island arc system. However, the structural style of the arc is very complicated and varied due to the repeated superposing of faults and folds on to earlier structures.
Geotectonic events that involved creation of the fundamental framework of the island arc crust occurred in east Asia in the Late Jurassic to Early Cretaceous and were probably induced by accretion and collision tectonics. The fragmentation and subsequent displacement of the crust took place during the Early Neogene in response to the terrane collision and the change in oceanic plate motion, leading to the opening of the Japan Sea. Huge amounts of volcano-sedimentary rocks buried the tilted fault blocks of pre-Tertiary basement with the development of the island arc.     

Rainstorm-induced landslides at Kisawa village, Tokushima Prefecture, Japan, August 2004

Heavy rain fell on the Shikoku area during Typhoon Namtheun, setting a new record for daily rainfall in Japan of 1317 mm. The rain which peaked at 120 mm/h, triggered numerous landslides in the Nakagawa basin of Tokushima Prefecture, Japan on August 1, 2004. Among them, four large, rapid, long-runout landslides were triggered at Kisawa village. Two people were caught in one landslide and disappeared without trace, and there was much property damage. Ring-shear tests on samples from the landslides showed that shear resistance was greatly reduced by high pore-water pressure after shear failure was triggered by the increase in ground-water level during the rain.