Seasonal variation in Tsushima Warm Current paths over the shelf off the San’in coast,Japan

Using long-term sea surface temperature (SST) and acoustic Doppler current profiler (ADCP) data, we examined variations in the current axis of the Tsushima Warm Current (TWC) off the San’in coast of Japan, near the entrance to the Japan Sea. There were large horizontal temperature gradients along the shelf edge in the southwestern Japan Sea from October to May, suggesting that the second branch of the TWC appears not only in spring and autumn but also in winter. From the ADCP data analysis, we found that currents with speeds of approximately 20 cm s^?1 and greater appeared around the shelf edge off San’in coast in all seasons. The SST and ADCP data analyses suggested that the second branch of the TWC exists around the shelf edge off the San’in coast throughout the year. This finding differed from those of previous studies. A relatively strong current (speed greater than 15 cm s^?1) appeared on the shore side in all seasons, except at line W in winter. This current might be the first branch of the TWC. The first branch seemed to occur around in 100 m isobaths, but shifted northward and southward because the bottom topography around lines W and M was relatively flat and the shelf was broad. The first branch was very obscure, and it was difficult to define the two branches of the TWC off the San’in coast from the seasonally averaged vectors. However, snapshots of current distribution derived from the ADCP data clearly showed these branches. Hence, both the first and second branches might occur throughout the year off the San’in coast.     

亚洲通量观测网建立的回顾与展望

1IntroductionTheelucidationofthebudgetsofcarbon,waterandothermassesatvariouslandecosystemshasbecomeanimportantsubjectintheglobalwarmingissue.Forthisstudy,thedatafrompreciseandlong-termobservationsofcarbondioxide,watervapor,andheatfluxtakeninvariouslandsur…     

Effects of experimental aqueous alteration on the abundances of argon‐rich noble gases in the Ningqiang carbonaceous chondrite

Abstract— Ar‐rich noble gases, the so‐called “subsolar” noble gases, are a major component of heavy primordial noble gases in unequilibrated ordinary chondrites and some classes of anhydrous carbonaceous chondrites, whereas they are almost absent in hydrous carbonaceous chondrites that suffered extensive aqueous alteration. To understand the effects of aqueous alteration on the abundance of Ar‐rich noble gases, we performed an aqueous alteration experiments on the Ningqiang type 3 carbonaceous chondrite that consists entirely of anhydrous minerals and contains Ar‐rich noble gases. Powdered samples and deionized neutral water were kept at 200 °C for 10 and 20 days, respectively. Mineralogical analyses show that, during the 10‐day alteration, serpentine and hematite formed at the expense of olivine, low‐Ca pyroxene, and sulfide. Noble gas analyses show that the 10‐day alteration of natural Ningqiang removed 79% of the primordial ³⁶Ar, 68% of the ⁸⁴Kr, and 60% of the ¹³²Xe, but only 45% of the ⁴He and 53% of the primordial ²⁰Ne. Calculated elemental ratios of the noble gases removed during the 10‐day alteration are in the range of those of Ar‐rich noble gases. These results indicate that Ar‐rich noble gases are located in materials that are very susceptible to aqueous alteration. In contrast, heavy primordial noble gases remaining in the altered samples are close to Q gas in elemental and isotope compositions. This indicates that phase Q is much more resistant to aqueous alteration than the host phases of Ar‐rich noble gases. In the 20‐day sample, the mineralogical and noble gas signatures are basically similar to those of the 10‐day sample, indicating that the loss of Ar‐rich noble gases was completed within the 10‐day alteration. Our results suggest that almost all of the Ar‐rich noble gases were lost from primitive asteroids during early, low‐temperature aqueous alteration.     

An empirical model for transient crater growth in granular targets based on direct observations

The present paper describes observations of crater growth up to the time of transient crater formation and presents a new empirical model for transient crater growth as a function of time. Polycarbonate projectiles were impacted vertically into soda-lime glass sphere targets using a single-stage light-gas gun. Using a new technique with a laser sheet illuminating the target [Barnouin-Jha, O.S., Yamamoto, S., Toriumi, T., Sugita, S., Matsui, T., 2007. Non-intrusive measurements of the crater growth. Icarus, 188, 506-521], we measured the temporal change in diameter of crater cavities (diameter growth). The rate of increase in diameter at early times follows a power law relation, but the data at later times (before the end of transient crater formation) deviates from the power law relation. In addition, the power law exponent at early times and the degree of deviation from a power law at later times depend on the target. In order to interpret these features, we proposed to modify Maxwell’s Z-model under the assumption that the strength of the excavation flow field decreases exponentially with time. We also derived a diameter growth model as: d(t)∝[1-exp(-βt)]^γ, where d(t) is the apparent diameter of the crater cavity at time t after impact, and β and γ are constants. We demonstrated that the diameter growth model could represent well the experimental data for various targets with different target material properties, such as porosity or angle of repose. We also investigated the diameter growth for a dry sand target, which has been used to formulate previous scaling relations. The obtained results showed that the dry sand target has larger degree of deviation from a power law, indicating that the target material properties of the dry sand target have a significant effect on diameter growth, especially at later times. This may suggest that the previously reported scaling relations should be reexamined in order to account for the late-stage behavior with the effect of target material properties.     

Automated cloud tracking system for the Akatsuki Venus Climate Orbiter data

Japanese Venus Climate Orbiter, Akatsuki, is cruising to approach to Venus again although its first Venus orbital insertion (VOI) has been failed. At present, we focus on the next opportunity of VOI and the following scientific observations.We have constructed an automated cloud tracking system for processing data obtained by Akatsuki in the present study. In this system, correction of the pointing of the satellite is essentially important for improving accuracy of the cloud motion vectors derived using the cloud tracking. Attitude errors of the satellite are reduced by fitting an ellipse to limb of an imaged Venus disk. Next, longitude–latitude distributions of brightness (cloud patterns) are calculated to make it easy to derive the cloud motion vectors. The grid points are distributed at regular intervals in the longitude–latitude coordinate. After applying the solar zenith correction and a highpass filter to the derived longitude–latitude distributions of brightness, the cloud features are tracked using pairs of images. As a result, we obtain cloud motion vectors on longitude–latitude grid points equally spaced. These entire processes are pipelined and automated, and are applied to all data obtained by combinations of cameras and filters onboard Akatsuki. It is shown by several tests that the cloud motion vectors are determined with a sufficient accuracy. We expect that longitude–latitude data sets created by the automated cloud tracking system will contribute to the Venus meteorology.     

The anisotropy of cosmic ray arrival directions around 10 eV

Anisotropy in the arrival directions of cosmic rays with energies above 10¹⁷ eV is studied using data from the Akeno 20 km² array and the Akeno Giant Air Shower Array (AGASA), using a total of about 114 000 showers observed over 11 years. In the first harmonic analysis, we have found a strong anisotropy of 4% around 10¹⁸ eV, corresponding to a chance probability of 0.2% after taking the number of independent trials into account. with two-dimensional analysis in right ascension and declination, this anisotropy is interpreted as an excess of showers near the directions of the Galactic Center and the Cygnus region.     

High-sensitive measurement of uranium LIII-edge X-ray absorption near-edge structure (XANES) for the determination of the oxidation states of uranium in crustal materials

The uranium L_III-edge XANES spectra for natural rocks at the concentration range of 0.96–124 mg kg⁻¹ were measured using a log spiral bent crystal Laue analyzer (BCLA) combined with a multi-element Ge detector. It was found that the quality of the XANES spectra using the BCLA was greatly improved due to a reduction of interfering fluorescence from major components such as Rb and Sr. The ratio of signal to background intensities in the U L_III-edge XANES spectra increased by a factor of 2.9–17 with the use of the BCLA, which greatly enhanced the detection limit for the speciation of the oxidation states of U or the U(IV)/U(VI) ratio of natural samples. In addition, it was demonstrated that the fluorescence XANES method coupled with the BCLA enable determination of the speciation of U for various natural samples such as acidic igneous rocks, ferromanganese nodules, sediments, and some sedimentary rocks such as shale and limestone.     

Gonadal histology and serum vitellogenin levels of bigeye tuna Thunnus obesus from the Northern Pacific Ocean--absence of endocrine disruption bio-indicators

Endocrine disrupting chemicals such as organochlorines have been detected in a large number of marine fish. Histological observation of the gonads, measurement of serum vitellogenin (VTG) level and of liver polychlorinated biphenyl (PCB) content were performed to evaluate the reproductive health and the contamination with endocrine disruptors in bigeye tuna Thunnus obesus, collected in the northern Pacific Ocean in 1999 and 2000. Abnormalities commonly found in species affected by endocrine disruptors such as the presence of oocytes in the testis or elevated serum VTG levels were not found in any of males examined. Both males and females had only small amounts of liver PCB content. The results suggest that currently there is little if any risk of organochlorine contamination or endocrine disruption of gonadal function in bigeye tuna from the northern Pacific Ocean. However, further studies are necessary to evaluate the health status of the open sea fishery resources.     

Transient crater growth in granular targets: An experimental study of low velocity impacts into glass sphere targets

We experimentally studied the formation and collapse processes of transient craters. Polycarbonate projectiles with mass of 0.49 g were impacted into the soda-lime glass sphere target (mean diameters of glass spheres are ∼36, 72, and 220 μm, respectively) using a single-stage light-gas gun. Impact velocity ranged from 11 to 329 m s⁻¹. We found that the transient crater collapses even at laboratory scales. The shape (diameter and depth) of the transient crater differs from that of the final crater. The depth-rim diameter ratios of the final and transient craters are 0.11-0.14 and 0.26-0.27, respectively. The rim diameter of both the transient and final crater depends on target material properties; however, the ratio of final to transient crater diameter does not. This suggests that target material properties affect the formation process of transient craters even in the gravity regime, and must be taken into account when scaling experimental results to planetary scales. By observing impacts into glass sphere targets, we show that although the early stage of the excavation flow does not depend on the target material properties, the radial expansion of the cavity after the end of vertical expansion does. This suggests that the effect of target material properties is specifically important in the later part of the crater excavation and collapse.     

Geochemical analyses of geological layers and groundwater flows

X-ray fluorescent spectroscope analysis easily finds ratios of geochemical elements in soil. Applying the method of ratio matching to measured ratios, the classification of geological layers, and the flow directions of groundwater can be determined. This method is applied to three hill slopes in Japan and the results are in good agreement with the observations and measurements of soil cores obtained by drilling. The classification of geological layers is found to be quantitatively connected with the rates of organic matter in soil cores. Received: 5 February 1999 · Accepted: 7 September 1999