Dependence of radon exhalation on grain size of sedimentary waste

Tailings resulted from sulphuric acid leaching process of uranium from sedimentary rocks contain high concentrations of ²²⁶Ra and its daughters, the most important of which is ²²²Rn. Movement of radon gas out of the tailings is strongly influenced by the physicochemical characteristics of these tailings especially their radium content and the grain size. So, the tailing samples were size fractionated into four sizes (>?250, 250–125, 125–74 and <?74 µm). The natural radioactivity was investigated using hyper-pure germanium detector and solid-state nuclear track detectors (CR-39) for bulk size and after size fractionation. The activity concentrations of different radionuclides in size-fractionated tailing samples have been shown to be strongly dependent on the size of the particles. In the range of >?250 and <?74 µm, the activity concentrations of ²³⁰Th, ²²⁶Ra, ²¹⁴Pb, ²¹⁴Bi, ²¹⁰Pb, ²³²Th and ⁴⁰K increased throughout with decreasing particle size, while that of ²³⁸U, ²³⁴U and ²³⁵U have an opposite effect. The results revealed an inverse relationship between the radon exhalation rate and size fractionation. Also, the results showed a good correlation between radium activity concentration and radon mass exhalation rate.     

A new record and a new ichnospecies of Arachnostega from the Middle Miocene of Egypt

The ichnogenus Arachnostega Bertling, 1992 is recorded for the first time from a bioeroded, coral-rich, Middle Miocene limestone bed in the middle Siwa Escarpment Member (Marmarica Formation) at Siwa Oasis, northern Western Desert of Egypt. These burrowing traces are preserved on the surface of a few internal moulds of bivalves and gastropods. Until now, the ichnogenus Arachnostega included a single ichnospecies, A. gastrochaenae Bertling, 1992. In the material studied herein, two ichnospecies are identified, described, illustrated and compared with other, similar traces. One of these is a new ichnospecies of Arachnostega; this is here named A. siwaensis ichnosp. nov. It is distinguished from A. gastrochaenae in the possession of tunnels that usually branch in a V-pattern; intervals of ramification are longest in the main branch and decrease in second- and third-order branches. Arachnostega traces were produced in a warm, low-energy, shallow-marine (<10?m water depth) environment. Polychaetes are the most likely producers of marine Arachnostega, which are commonly occurred in the same studied bed. This new occurrence is significant in extending the known stratigraphical and geographical ranges of Arachnostega into the Middle Miocene of Egypt.     

Use of satellite data and GIS for assessing the agricultural potentiality of the soils South Farafra Oasis, Western Desert, Egypt

Overpopulation and food security are the main global problems alert decision makers. In developing countries, such problem put extra pressure for horizontal expansion for agricultural development. The rapid sprawl of urbanized areas on the alluvial land of the River Nile and delta to accommodate the population growth has encouraged governmental and private sector for agricultural expansion in the desert. Unless there are reliable information and accurate studies for land and soil suitability, there will be a collapse of such investment. To evaluate the potential suitability of soil for agriculture development in areas of the western desert, satellite images, geographic information, and field survey including soil profiles and artesian water samples with laboratory analysis were integrated to classify the soils according their suitability for specific crop. The main land qualities of the different mapping units and the crop requirement were rated and matched to obtain the current and potential land suitability using Automated Land Evaluation System “ALES”. The study found that the main physiographic units are plateaus, hilland, mountain, and depression floor. But there are three limiting parameters for land suitability which are the lack of nutrient elements, wind erosion vulnerability, and soil texture. The study concluded that the best crops adapted with the soil conditions and could be feasible for economic use are: (1) native vegetation such as agol, sand trees, sammar, halfaa, bawaal, qordaob, bardi, and qortom; (2) filed crops such as onion, garlic, watermelon and wheat; and (3) fruits such as olive and date palms.     

Using GIS modeling to assess the agricultural sustainability in Kafr El-Sheikh governorate, Nile Delta, Egypt

The evaluation of agricultural sustainability status helps in identifying specific indicators that constrain the achievement of sustainable agriculture. The agricultural sector in Egypt is facing major sustainability constraints such as scarce land and water resources, environmental degradation, and rapid population growth as well as institutional arrangement including land tenure and farm fragmentation, agricultural administration, lack of infrastructure, and credit utilization and high interest rates. This study aims to evaluate the agricultural sustainability in some areas in Kafr El-Sheikh governorate, north of the Nile Delta; the international framework for evaluating sustainable land management was used for realizing this objective. The map of the physiographic soils of the studied area was produced depending upon Landsat ETM⁺ images analysis; the results indicate that the area includes three main landscapes, i.e., alluvial, lacustrine, and marine plains. The characteristics of productivity, security, protection, economic viability, and social acceptability in the different mapping units were assessed. The obtained results show that the studied area includes two different class types, the first are the lands that are marginally below the requirement of sustainability and the second are those lands that do not meet sustainability requirements. The former class is represented by the physiographic units of alluvial plain, whereas the latter class is represented by the physiographic units of the lacustrine and marine plains. The sustainability constrains in the studied area are related to the soil productivity, economic viability, and social acceptability.     

Composition,radioactivity, and possible applications of kaolin deposits of Sinai,Egypt

This work discusses the composition, radioactivity, and possible utilization of the kaolin resources in Sinai which are hosted in thick sandstone sequences belonging to the Carboniferous (Wadi Khaboba) and Early Cretaceous (Wadi Iseila and Abansakar) ages. The characterization of kaolin was done by microscopic and SEM examination, supported by XRD and ICP-MS analyses. The studied kaolin resources consist of kaolinite, as the main constituent, associated with subsidiary dickite and halloysite, and minor contribution of smectite and illite. The most dominant non-clay mineral is quartz, besides minor gypsum, dolomite, and hematite. Ferrugination dominates, in most cases, at the upper boundaries of the kaolin lenses, suggesting possible supergene activity. The high Al₂O₃/SiO₂ ratio for the Cretaceous kaolin (0.54, in average) specifies its better grade relative to the Carboniferous kaolin (0.43, in average). The kaolin of the middle part of lens C in Wadi Iseila contains Si/Al molecular ratio of about unity, suggesting high-grade kaolin. The Carboniferous kaolin has enriched the radionuclides: U, Th, and Ra (at disequilibrium state due to leaching of eU relative to Ra) and the REE, relative to that of the Cretaceous age. The Carboniferous kaolin is characterized by a higher contribution of HREE (zircon signature), whereas LREE seems to be more influential for the Early Cretaceous kaolin (monazite signature). In spite of the very high CIA index (93 to 99), none of the analyzed kaolin deposits displays Ce abnormality. The high radioactivity of some Carboniferous kaolin can be a serious impediment for its utilization or its exportation. The kaolin of Sinai does not satisfy the international standards for paperwork industries and refractory manufacturing, but beneficiation may overcome this challenge. However, some lenses have high-grade kaolin with a low percentage of oxides of iron, magnesium, calcium, sodium, and potassium and a low radioactivity, hence nominated for the local refractory industry. The high-grade kaolin of Sinai fulfills the standards required for ceramics manufacturing in the global market. Grade 3 kaolin (< 30%, Al₂O₃) can be used in the manufacturing of white Portland cement and red glaze manufacturing on both local and global markets.     

Impact of rock-water interactions and recharge on water resources quality of the Agadir-Essaouira basin,southwestern Morocco

The Agadir-Essaouira area in the occidental High Atlas Mountains of Morocco is characterized by a semi-arid climate. The scarcity and quality of water resources, exacerbated by long drought periods, constitute a major problem for a sustainable development of this region. Groundwater resources of carbonate units within Jurassic and Cretaceous aquifers are requested for drinking and irrigation purposes. In this study, we collected 84 samples from wells, boreholes, springs, and rivers. Hydrochemical and isotopic data were used to examine the mineralization and origin of water, which control groundwater quality. The chemical composition of water seems to be controlled by water-rock interactions, such as dissolution of carbonates (calcite and dolomite), weathering of gypsum, as well as ion exchange processes, which explain the observed variability. Stable isotopes results show that groundwater from the mainly marly Cretaceous aquifer are submitted to an evaporation effect, while samples from the chiefly calcareous Jurassic aquifer indicate a meteoric origin, due to a rapid infiltration of recharge runoff through the karstic outcrops. The low values of δ¹⁸O and δ²H suggest a local recharge from areas with elevations ranging from 400 to 1200 m for the Cretaceous aquifer and from 800 to 1500 m for the Jurassic units.     

GIS-based impact assessment of land-use changes on groundwater quality: study from a rapidly urbanizing region of South India

This study attempts to assess the influence of changing land-use patterns on the groundwater quality of the hard rock aquifer system in the Maheshwaram watershed, near Hyderabad, India. The study area is a rapidly urbanizing region with land development progressing at a fast pace. To study the impact of this rapid urbanization and overall land-use transition, a groundwater quality index (GQI) was prepared within a geographical information system (GIS). The GQI integrates the different water quality parameters to give a final index value that can be used for spatio-temporal comparisons. The land-use transitions were closely monitored from 2003 to 2008 using multispectral satellite images. The land-use pattern has changed drastically with an increase in the built-up area at the expense of other land uses. The analysis reveals a rapid deterioration of groundwater quality related mainly to the increase in built-up land with unsewered sanitation and poultry farms. Seasonal variability of the groundwater quality was also assessed. Mean GQI decreased from 84.16 to 83.26 over a period of 5 years from 2003 to 2008, while seasonal variability of water quality increased. GQI and Seasonal Variability of water quality were integrated in GIS to yield a groundwater sustainability map, in terms of water quality. Zones of sustainable and unsustainable groundwater use were demarcated for better decision making related to municipal land allotment in this rapidly urbanizing region.     

A practical co-simulation approach for multiscale analysis of geotechnical systems

The particulate nature of granular soils can be accurately simulated at a microscale level. However, due to the huge spatial extent of geotechnical systems, a model fully constructed at such a scale is almost impossible with current computing technologies. Hence, continuum-based approaches are considered as the practical scale for modeling the majority of problems. Combining both scales enables benefiting from the advantages of both techniques while trying to overcome their drawbacks. Although a significant number of publications have addressed coupling both scales, only a few provide information regarding implementing the proposed procedures. In this study, an efficient co-simulation framework for conducting multiscale analysis is introduced. The framework is based on integrating existing continuum and micromechanical modeling software packages and therefore benefitting from already existing codes. A computational simulation of a rigid pile in contact with granular soil demonstrating the capabilities of such technique is presented. The near-field zone surrounding the pile is modeled using DEM whereas FEM is utilized to model far-field zones that are not affected by the presence of the pile. Results of conducted simulations resemble those obtained from experimental results. The proposed approach appears to be a very effective and promising tool to model boundary value problems of geotechnical systems.     

Compression Behaviour of Chlef Sand and Transition of Fines Content Using Pressure-Dependent Maximum Void Ratios of Sand

Geotechnical and Geological Engineering - This paper presents a study on Chlef sand to examine the effect of fines content (Fc), relative density (RD) and initial conditions on the compressibility...     

Adsorption of Congo red and crystal violet dyes onto cellulose extracted from Egyptian water hyacinth

Natural Hazards - The present investigation has highlighted the utility of floating aquatic Egyptian hyacinth, which is considered as a significant reason for environmental problems in Nile River,...