Developing a long-term monitoring network under uncertain flowpaths

A long-term monitoring well network is developed using complementary and simple approaches in conjunction with a stochastic ground water flow and transport model. The development is illustrated for a case study of a U.S. nuclear testing site (Shoal) that is undergoing environmental restoration. The network design builds on three different, yet complementary, tools for locating the monitoring wells with a main objective of detection monitoring. The first tool is applied to select potential siting horizons where monitoring wells could be located. The second tool is used to place monitoring wells in locations with high success probability. The success here is defined as the detection of migrating stochastic plumes before a certain mass percentage reaches a compliance boundary. The third tool is used to analyze detection efficiency of multiple combinations of three wells. Seventy-six different three-well networks are selected from 20 candidate locations and are evaluated for detection efficiency. From the 76 networks analyzed, 28 attain detection efficiency close to or above 70%. The results of the different analyses provide multiple alternatives for the locations of the three wells, which will become part of the long-term monitoring network at Shoal. A number of combinations are equally good, and the final choice will depend on practical considerations and future agreements between model sponsor and regulators.     

Investigation of seasonal droughts and related large-scale atmospheric dynamics over the Potwar Plateau of Pakistan

As a result of climate change and unsustainable land use management in the recent past, droughts have become one of the most devastating climatic hazards whose impacts may prolong from months to years. This study presents analysis of droughts for two major cropping seasons, i.e., Kharif (May–September) and Rabi (October–April), over the Potwar Plateau of Pakistan. The analysis is performed using various datasets viz. observational, reanalysis, and Regional Climate Models (RCMs), for the past (1981–2010) and future (2011–2100) time periods. The following two methods for the identification of dry and wet years, also referred to as drought and wetness, are applied: (1) the percentile rank approach and (2) the drought indices, Standardized Precipitation Index (SPI) and Reconnaissance Drought Index (RDI). Future projections of droughts are investigated using RCM (RegCM4.4 and RCA4) outputs from CORDEX South Asia domain under two Representative Concentration Pathway (RCP) scenarios, RCP4.5 and RCP8.5. Generally, the indices show non-significant decreasing trends of drought severity in the recent past for all cases; however, significant increasing trends are observed for annual (0.006) and Kharif (0.007) cases under RCP4.5 scenario. The analysis of large-scale atmospheric dynamics suggests the significant role of low-level geopotential height anomalies over Tibetan Plateau (northwest of Pakistan) during Kharif (Rabi) season in controlling drought occurrence by transporting moisture from the Bay of Bengal (Arabian Sea). Moreover, composites of vertically integrated moisture transport, moisture flux convergence/divergence, and precipitable water anomalies show their marked contribution in maintaining the drought/wetness conditions over the Potwar region.     

Application of soft computing based hybrid models in hydrological variables modeling: a comprehensive review

Theoretical and Applied Climatology - Snow is a key element for many socioeconomic activities in mountainous regions. Due to the sensitivity of the snow cover to variations of temperature and...     

GPS Water Vapor and Its Comparison with Radiosonde and ERA-Interim Data in Algeria

Remote sensing of atmospheric water vapor using global positioning system(GPS) data has become an effective tool in meteorology,weather forecasting and climate research. This paper presents the estimation of precipitable water(PW)from GPS observations and meteorological data in Algeria,over three stations located at Algiers,Bechar and Tamanrasset.The objective of this study is to analyze the sensitivity of the GPS PW estimates for the three sites to the weighted mean temperature(T_m),obtained separately from two types of T_m–T_s regression [one general,and one developed specifically for Algeria(T_s stands for surface temperature)],and calculated directly from ERA-Interim data. The results show that the differences in T_m are of the order of 18 K,producing differences of 2.01 mm in the final evaluation of PW. A good agreement is found between GPS-PW and PW calculated from radiosondes,with a small mean difference with Vaisala radiosondes.A comparison between GPS and ERA-Interim shows a large difference(4 mm) in the highlands region. This difference is possibly due to the topography. These first results are encouraging,in particular for meteorological applications in this region,with good hope to extend our dataset analysis to a more complete,nationwide coverage over Algeria.     

Surface Energy Balance Measurements Above an Exurban Residential Neighbourhood of Kansas City,Missouri

Previous measurements of urban energy balances generally have been limited to densely built, central city sites and older suburban locations with mature tree canopies that are higher than the height of the buildings. In contrast, few data are available for the extensive, open vegetated types typical of low-density residential areas that have been newly converted from rural land use. We made direct measurements of surface energy fluxes using the eddy-covariance technique at Greenwood, a recently developed exurban neighbourhood near Kansas City, Missouri, USA, during an intensive field campaign in August 2004. Energy partitioning was dominated by the latent heat flux under both cloudy and near clear-sky conditions. The mean daytime Bowen ratio (β) values were 0.46, 0.48, and 0.47 respectively for the cloudy, near clear-sky and all-sky conditions. Net radiation (R _n ) increased rapidly from dawn (−34 and −58W m⁻²) during the night to reach a maximum (423 and 630W m⁻²) after midday for cloudy and near clear-sky conditions respectively. Mean daytime values were 253 and 370W m⁻², respectively for the cloudy and near clear-sky conditions, while mean daily values were 114 for cloudy and 171W m⁻² for near clear-sky conditions, respectively. Midday surface albedo values were 0.25 and 0.24 for the cloudy and near clear-sky conditions, respectively. The site exhibited an angular dependence on the solar elevation angle, in contrast to previous observations over urban and suburban areas, but similar to vegetated surfaces. The latent heat flux (Q _E ), sensible heat flux (Q _H ), and the residual heat storage ΔQ _s terms accounted for between 46–58%, 21–23%, and 18–31% of R _n , respectively, for all-sky conditions and time averages. The observed albedo, R _n , and Q _E values are higher than the values that have been reported for suburban areas with high summer evapotranspiration rates in North America. These results suggest that the rapidly growing residential areas at the exurban fringe of large metropolitan areas have a surface energy balance that is more similar to the rural areas from which they were developed than it is to the older suburbs and city centres that make up the urban fabric to which they are being joined.     

Bias correction method of high-resolution satellite-based precipitation product for Peninsular Malaysia

Theoretical and Applied Climatology - Satellite-based precipitation (SBP) is emerging as a reliable source for high-resolution rainfall estimates over the globe. However, uncertainty in SBP is...     

Analysis and farmers’ perception of climate change in the Kashmir Valley,India

Theoretical and Applied Climatology - Analysis of climatic variables is important for the detection and attribution of climate change trends and has received considerable attention from researchers...     

DHI evaluation by combining rock physics simulation and statistical techniques for fluid identification of Cambrian-to-Cretaceous clastic reservoirs in Pakistan

The use of seismic direct hydrocarbon indicators is very common in exploration and reservoir development to minimise exploration risk and to optimise the location of production wells. DHIs can be enhanced using AVO methods to calculate seismic attributes that approximate relative elastic properties. In this study, we analyse the sensitivity to pore fluid changes of a range of elastic properties by combining rock physics studies and statistical techniques and determine which provide the best basis for DHIs. Gassmann fluid substitution is applied to the well log data and various elastic properties are evaluated by measuring the degree of separation that they achieve between gas sands and wet sands. The method has been applied successfully to well log data from proven reservoirs in three different siliciclastic environments of Cambrian, Jurassic, and Cretaceous ages. We have quantified the sensitivity of various elastic properties such as acoustic and extended elastic (EEI) impedances, elastic moduli (K _sat and K _sat–μ), lambda–mu–rho method (λρ and μρ), P-to-S-wave velocity ratio (V _P/V _S), and Poisson’s ratio (σ) at fully gas/water saturation scenarios. The results are strongly dependent on the local geological settings and our modeling demonstrates that for Cambrian and Cretaceous reservoirs, K _sat–μ, EEI, V _P/V _S, and σ are more sensitive to pore fluids (gas/water). For the Jurassic reservoir, the sensitivity of all elastic and seismic properties to pore fluid reduces due to high overburden pressure and the resultant low porosity. Fluid indicators are evaluated using two metrics: a fluid indicator coefficient based on a Gaussian model and an overlap coefficient which makes no assumptions about a distribution model. This study will provide a potential way to identify gas sand zones in future exploration.