A Middle Miocene carbonate embankment on an active volcanic slope: Ilhéu de Baixo,Madeira Archipelago,Eastern Atlantic

Carbonate factories on insular oceanic islands in active volcanic settings are poorly explored. This case study illuminates marginal limestone deposits on a steep volcanic flank and their recurring interruption by deposits linked to volcaniclastic processes. Historically known as Ilhéu da Cal (Lime Island), Ilhéu de Baixo was separated from Porto Santo, in the Madeira Archipelago, during the course of the Quaternary. Here, extensive mines were tunnelled in the Miocene carbonate strata for the production of slaked lime. Approximately 10 000 m³ of calcarenite (−1 to 1ø) was removed by hand labour from the Blandy Brothers mine at the south end of the islet. Investigations of two stratigraphic sections at opposite ends of the mine reveal that the quarried material represents an incipient carbonate ramp developed from east to west and embanked against the flank of a volcanic island. A petrographic analysis of limestones from the mine shows that coralline red algae from crushed rhodoliths account for 51% of all identifiable bioclasts. This material was transported shoreward and deposited on the ramp between normal wave base and storm wave base at moderate depths. The mine's roof rocks are formed by Surtseyan deposits from a subsequent volcanic eruption. Volcaniclastic density flows also are a prevalent factor interrupting renewed carbonate deposition. These flows arrived downslope from the north and gradually steepened the debris apron westwards. Slope instability is further shown by a coral rudstone density flow that followed from growth of a coral reef dominated by Pocillopora madreporacea (Lamarck), partial reef collapse, and transport from a more easterly direction into a fore‐reef setting. The uppermost facies represents a soft bottom at moderate depths in a quiet, but shore‐proximal setting. Application of this study to a broader understanding of the relationship between carbonate and volcaniclastic deposition on oceanic islands emphasizes the susceptibility of carbonates to dilution and complete removal by density flows of various kinds, in contrast to the potential for preservation beneath less‐disruptive Surtseyan deposits. Copyright © 2013 John Wiley & Sons, Ltd.     

Morphology and modern sedimentary deposits of the macrotidal Marapanim Estuary (Amazon,Brazil)

The northern Brazilian coast, east of the Amazon River is characterized by several macrotidal estuarine systems that harbor large mangrove areas with approximately 7600 km². The Marapanim Estuary is influenced by macrotidal regime with moderate waves influence. Morphologic units were investigated by using remote sensing images (i.e., Landsat-7 ETM+, RADARSAT- 1 Wide and SRTM) integrated with bathymetric data. The modern sedimentary deposits were analyzed from 67 cores collected by Vibracore and Rammkersonde systems. Analysis of morphology and surface sedimentary deposits of the Marapanim River reveal they are strongly influenced by the interaction of tidal, wave and fluvial currents. Based on these processes it was possible to recognize three distinct longitudinal facies zonation that revels the geological filling of a macrotidal estuary. The estuary mouth contain fine to medium marine sands strongly influenced by waves and tides, responsible for macrotidal sandy beaches and estuarine channel development, which are characterized by wave-ripple bedding and longitudinal cross-bedding sands. The estuary funnel is mainly influenced by tides that form wide tidal mudflats, colonized by mangroves, along the estuarine margin, with parallel laminations, lenticular bedding, root fragments and organic matter lenses. The upstream estuary contains coarse sand to gravel of fluvial origin. Massive mud with organic matter lenses, marks and roots fragments occur in the floodplain accumulates during seasonal flooding providing a slowly aggrading in the alluvial plain. This morphologic and depositional pattern show easily a tripartite zonation of a macrotidal estuary, that are in the final stage of filling.     

Modélisation morphodynamique cross-shore d'un estran vaseux

Numerical experiments were performed to simulate the profile evolution of an intertidal mudflat with a 1D cross-shore morphodynamical model. First, the hydrodynamical forcing is a cross-shore tidal current due to semi-diurnal variations of the free surface elevation at the open boundary. Further, considering the conservation of the action density of surface gravity waves, a wave height (and resulting bottom shear stress) calculation is added to the morphodynamical model. Results of the numerical experiments show that the shape of the profile reaches equilibrium. The mudflat progrades continually when the forcing is tide only, whereas it can be steady under the simultaneous action of tide and waves. To cite this article: B. Waeles et al., C. R. Geoscience 336 (2004).     

Impact of data model and point density on aboveground forest biomass estimation from airborne LiDAR

Background

Accurate estimation of aboveground forest biomass (AGB) and its dynamics is of paramount importance in understanding the role of forest in the carbon cycle and the effective implementation of climate change mitigation policies. LiDAR is currently the most accurate technology for AGB estimation. LiDAR metrics can be derived from the 3D point cloud (echo-based) or from the canopy height model (CHM). Different sensors and survey configurations can affect the metrics derived from the LiDAR data. We evaluate the ability of the metrics derived from the echo-based and CHM data models to estimate AGB in three different biomes, as well as the impact of point density on the metrics derived from them.

Results

Our results show that differences among metrics derived at different point densities were significantly different from zero, with a larger impact on CHM-based than echo-based metrics, particularly when the point density was reduced to 1 point m^?2. Both data models-echo-based and CHM-performed similarly well in estimating AGB at the three study sites. For the temperate forest in the Sierra Nevada Mountains, California, USA, R² ranged from 0.79 to 0.8 and RMSE (relRMSE) from 69.69 (35.59%) to 70.71 (36.12%) Mg ha^?1 for the echo-based model and from 0.76 to 0.78 and 73.84 (37.72%) to 128.20 (65.49%) Mg ha^?1 for the CHM-based model. For the moist tropical forest on Barro Colorado Island, Panama, the models gave R² ranging between 0.70 and 0.71 and RMSE between 30.08 (12.36%) and 30.32 (12.46) Mg ha^?1 [between 0.69–0.70 and 30.42 (12.50%) and 61.30 (25.19%) Mg ha^?1] for the echo-based [CHM-based] models. Finally, for the Atlantic forest in the Sierra do Mar, Brazil, R² was between 0.58–0.69 and RMSE between 37.73 (8.67%) and 39.77 (9.14%) Mg ha^?1 for the echo-based model, whereas for the CHM R² was between 0.37–0.45 and RMSE between 45.43 (10.44%) and 67.23 (15.45%) Mg ha^?1.

Conclusions

Metrics derived from the CHM show a higher dependence on point density than metrics derived from the echo-based data model. Despite the median of the differences between metrics derived at different point densities differing significantly from zero, the mean change was close to zero and smaller than the standard deviation except for very low point densities (1 point m^?2). The application of calibrated models to estimate AGB on metrics derived from thinned datasets resulted in less than 5% error when metrics were derived from the echo-based model. For CHM-based metrics, the same level of error was obtained for point densities higher than 5 points m^?2. The fact that reducing point density does not introduce significant errors in AGB estimates is important for biomass monitoring and for an effective implementation of climate change mitigation policies such as REDD + due to its implications for the costs of data acquisition. Both data models showed similar capability to estimate AGB when point density was greater than or equal to 5 point m^?2.

     

Performance of masonry enclosure walls: lessons learned from recent earthquakes

This paper discusses the issue of performance requirements and construction criteria for masonry enclosure and infill walls.Vertical building enclosures in European countries are very often constituted by non-load-bearing masonry walls, using horizontally perforated clay bricks.These walls are generally supported and confined by a reinforced concrete frame structure of columns and beams/slabs.Since these walls are commonly considered to be nonstructural elements and their influence on the structural response is ignored,their consideration in the design of structures as well as their connection to the adjacent structural elements is frequently negligent or insufficiently detailed.As a consequence,nonstructural elements,as for wall enclosures,are relatively sensitive to drift and acceleration demands when buildings are subjected to seismic actions. Many international standards and technical documents stress the need for design acceptability criteria for nonstructural elements,however they do not specifically indicate how to prevent collapse and severe cracking,and how to enhance the overall stability in the case of moderate to high seismic loading.Furthermore,a review of appropriate measures to improve enclosure wall performance and both in-plane and out-of-plane integrity under seismic actions is addressed.     

Variations in stratigraphic and reservoir properties adjacent to the Mid-Paleocene sequence boundary, Campo section, Pyrenees, Spain

The Paleocene of the Campo section, Spain has different sedimentological characteristics above and below the Mid-Paleocene Unconformity. Beneath the unconformity sediments are dominated by evaporitic carbonates and collapse breccias. Above it they are characterized by continental detrital beds alternating with paleosols. Different subaerial features are observed and correspond to different porosity values, pore–throat sizes and micrite morphologies. Unexposed or intertidal facies have low porosity, low throat–pore size (mesoporosity) and well preserved rhombic crystals. Intermediate exposed facies (paleosols) possess medium porosity, medium pore–throat size (microporosity) and mainly micro-rhombic crystals. Finally, the facies corresponding to high exposure intensity and to evaporitic original facies presents high porosity, permeability, large pore–throat size and rounded micritic crystals. These observations show that the emersion phase caused important dissolution, especially when associated with an easily dissolved original lithofacies.     

Variability over time in the sources of South Portuguese Zone turbidites: evidence of denudation of different crustal blocks during the assembly of Pangaea

This study combines geochemical and geochronological data in order to decipher the provenance of Carboniferous turbidites from the South Portuguese Zone (SW Iberia). Major and trace elements of 25 samples of graywackes and mudstones from the Mértola (Visean), Mira (Serpukhovian), and Brejeira (Moscovian) Formations were analyzed, and 363 U-Pb ages were obtained on detrital zircons from five samples of graywackes from the Mira and Brejeira Formations using LA-ICPMS. The results indicate that turbiditic sedimentation during the Carboniferous was marked by variability in the sources, involving the denudation of different crustal blocks and a break in synorogenic volcanism. The Visean is characterized by the accumulation of immature turbidites (Mértola Formation and the base of the Mira Formation) inherited from a terrane with intermediate to mafic source rocks. These source rocks were probably formed in relation to Devonian magmatic arcs poorly influenced by sedimentary recycling, as indicated by the almost total absence of pre-Devonian zircons typical of the Gondwana and/or Laurussia basements. The presence of Carboniferous grains in Visean turbidites indicates that volcanism was active at this time. Later, Serpukhovian to Moscovian turbiditic sedimentation (Mira and Brejeira Formations) included sedimentary detritus derived from felsic mature source rocks situated far from active magmatism. The abundance of Precambrian and Paleozoic zircons reveals strong recycling of the Gondwana and/or Laurussia basements. A peri-Gondwanan provenance is indicated by zircon populations with Neoproterozoic (Cadomian-Avalonian and Pan-African zircon-forming events), Paleoproterozoic, and Archean ages. The presence of late Ordovician and Silurian detrital zircons in Brejeira turbidites, which have no correspondence in the Gondwana basement of SW Iberia, indicates Laurussia as their most probable source.     

Catastrophic,rainfall-induced debris flows in Andean villages of Tarapacá, Atacama Desert,northern Chile

In March 2012, during the rainy season in the Altiplano plateau, a >100-year return period rainfall event affected the deeply incised valleys of the Precordillera of the Tarapacá Region, northern Chile. This extreme event in a very arid region triggered a number of debris and mud flows that caused severe damage and destruction in several small villages along the Camiña and Tarapacá valleys. The highly vulnerable location of the villages on top of alluvial fans due to socioeconomic and cultural reasons is a key factor to explain the level of destruction in most villages. In this paper, this unusual, remarkable landslide event is described, and the hazard faced by these settlements for future rainfall episodes and possible mitigation measures are discussed.     

The impact of dust on the scaling properties of galaxy clusters

We investigate the effect of dust on the scaling properties of galaxy clusters based on hydrodynamic N -body simulations of structure formation. We have simulated five dust models plus radiative cooling and adiabatic models using the same initial conditions for all runs. The numerical implementation of dust was based on the analytical computations of Montier & Giard. We set up dust simulations to cover different combinations of dust parameters that make evident the effects of size and abundance of dust grains. Comparing our radiative plus dust cooling runs with a purely radiative cooling simulation, we find that dust has an impact on cluster scaling relations. It mainly affects the normalization of the scalings (and their evolution), whereas it introduces no significant differences in their slopes. The strength of the effect critically depends on the dust abundance and grain size parameters as well as on the cluster scaling. Indeed, cooling due to dust is effective in the cluster regime and has a stronger effect on the 'baryon driven' statistical properties of clusters such as   L _X– M , Y – M , S – M   scaling relations. Major differences, relative to the radiative cooling model, are as high as 25 per cent for the   L _X– M   normalization, and about 10 per cent for the Y – M and S – M normalizations at redshift zero. On the other hand, we find that dust has almost no impact on the 'dark matter driven'   T _mw– M   scaling relation. The effects are found to be dependent in equal parts on both dust abundances and grain size distributions for the scalings investigated in this paper. Higher dust abundances and smaller grain sizes cause larger departures from the radiative cooling (i.e. with no dust) model.     

Center-to-Limb Variation of Solar Microwave Bursts

Statistical studies of hard X-ray flares position on the solar disk have shown that the more energetic hard X-rays have a tendency to be more concentrated near the limb rather than at disk center, whereas lower-energy hard X-ray emission seems isotropic. Since the high-frequency radio emission is believed to be produced by the same energetic electron population responsible for the high-energy hard X-rays, we searched the microwave/millimeter emitting bursts for center-to-limb variation in their emission. A total of 499 bursts observed by the radio telescopes in Bern at the frequencies of 3.1, 5.2, 8.4, 11.8, 19.6, 35.0, and 50.0 GHz were analyzed. Simultaneous Hα flares were used for determination of the radio burst position on the solar disk. For each of the 7 frequencies, the peak flux and duration were studied as a function of heliocentric position. For 312 bursts, spectral parameters such as spectral index, peak frequency, and flux at spectral maximum were analyzed. For a subset of 43 bursts with emission at all frequencies, the emission and spectral parameters were analyzed. Center-to-limb variations of the spectral parameters for all bursts were sought. In order to interpret the observational results, we have performed a numerical simulation of gyrosynchrotron spectra. We find that high-frequency events, which are also the more energetic ones, have larger center-to-limb variations in their parameters than do the overall flares. Moreover, this behavior agrees with theoretical predictions.