Monitoring Large-Scale Tests for Nuclear Waste Disposal

Two large-scale “in situ” demonstration experiments and their instrumentation are described. The first test (FEBEX Experiment) involves the hydration of a compacted bentonite barrier under the combined effect of an inner source of heat and an outer water flow from the confining saturated granite rock. In the second case, the progressive de-saturation of Opalinus clay induced by maintained ventilation of an unlined tunnel is analyzed. The paper shows the performance of different sensors (capacitive cells, psychrometers, TDR’s) and a comparison of fill behaviour with modelling results. The long term performance of some instruments could also be evaluated specially in the case of FEBEX test. Capacitive sensors provide relative humidity data during long transient periods characterised by very large variations of suction within the bentonite.     

Assessment of three temperature reconstruction methods in the virtual reality of a climate simulation

The performance of statistical climate reconstruction methods in the pre-instrumental period is uncertain, as they are calibrated in a short instrumental period but applied to much longer reconstructions time spans. Here, the virtual reality created by a climate simulation of the past millennium with the model ECHO-G is used as a test bed of three methods to reconstruct the annual Northern Hemisphere temperature. The methods are Composite plus Scaling, the inverse regression method of Mann et al. (Nature 392:779–787, 1998) and a direct principal-components regression method. The testing methodology is based on the construction of pseudo-proxies derived from the climate model output, the application of each of these methods to pseudo-proxy timeseries, and the comparison of their result with the simulated mean temperature. Different structures of the noise have been used to construct pseudo-proxies, ranging from the simulated grid-point precipitation. Also, one sparse and one denser pseudo-proxy network, co-located with two real networks, have been considered. All three methods underestimate the simulated variations of the Northern Hemisphere temperature, but the Composite plus Scaling method clearly displays a better performance and is robust against the different noise models and network size. The most relevant factor determining the skill of the reconstruction appears to be the network size, whereas the different noise models tend to yield similar results.     

Segmentation algorithm for long time series analysis

Time series analysis is an important issue in the earth science-related engineering applications such as hydrology, meteorology and environmetrics. Inconsistency and nonhomogeneity that might arise in a time series yield segments with different statistical characteristics. In this study, an algorithm based on the first order statistical moment (average) of a time series is developed and applied on five time series with length ranging from 84 items to nearly 1,300. Comparison to the existing segmentation algorithms proves the applicability and usefulness of the proposed algorithm in long hydrometeorological and geophysical time series analysis.     

Colloidal Stability and Toxicity of Gold Nanoparticles and Gold Chloride on <Emphasis Type="Italic">Chlamydomonas reinhardtii</Emphasis>

Here we have examined interactions of gold nanoparticles differing in primary particle size and coating with the green algae Chlamydomonas reinhardtii as function of the colloidal stability of the particles in the experimental media used for toxicity studies. Interactions of dissolved Au³⁺ ions with algae were also examined. Included endpoints were photosynthetic yield and algal growth. Morphological and structural effects were examined microscopically and by flow cytometry. The results indicate no significant toxicity of gold nanoparticles to C. reinhardtii. Analysis of published data suggests toxicity of gold nanoparticles on algal growth to relate rather to particular coatings than to the gold core.     

Hydrochemical and Multivariate Statistical Evaluation of Heavy Metals in Shallow Alluvial Aquifers of North Brahmaputra Plain,India

The aim of this study was to display distribution and relationships of heavy elements in the unconfined, shallow alluvial aquifers of the lower Jia Bharali catchment and adjoining areas in central part of North Brahmaputra Plain (NBP), India using hydrochemical as well as multivariate statistical techniques such as principal component analysis (PCA) and cluster analysis. The original matrix was made up of 10 trace elements (As, Cd, Cu, Co, Cr, Fe, Mn, Pb, Ni and Zn) estimated from 50 shallow alluvial dug wells in both the wet and the dry season for a duration of 3 hydrological years (2008–2011). Except As, Cu and Zn all the other toxic metals in the shallow aquifers were found exceeding the WHO maximum permissible limits for drinking water. PCA extracted five varimax factors as geogenic, agricultural and anthropogenic explaining about 71.2% of the total variance in the wet season and 69.3% total variance in the dry season. Hierarchical cluster analysis classified the dug wells into two groups in the wet season and three groups in the dry season with respect to the heavy elements. The results emphasized the need for routine monitoring and management in order to avoid contamination of groundwater sources in the NBP with respect to the dissolved trace elements.     

New data on the present-day active fluid regime of fractured zones of crystalline basement and sedimentary cover in the eastern part of Volga-Ural region

The study area is the South Tatarstan Arch located in the Volgo-Ural Region, which is an enigmatic crustal segment occupying one third of the East European Platform. Monitoring studies have shown that fluid discharge processes are still active and time-dependent. This paper presents an integrated review of the geological, geophysical, hydrochemical and geochemical studies of the crystalline basement of Tatarstan. These studies are based on the stratigraphic and compositional schemes within the crystalline basement, the drilling of deep wells, the geodynamic activity of the fractured zones of the crystalline basement and the presence of fluids therein. Furthermore, the changes in the chemical composition of the basement waters are taken into account.     

Development and verification of the comprehensive model for physical properties of hydrate sediment

Natural gas hydrate is widely distributed all over the world and may be a potential resource in the near future, whereas hydrate dissociation during the development affects wellbore stability and drilling safety. However, the present modeling of hydrate reservoir parameters ignored the influence of effective stress and only considered the hydrate saturation. In this paper, a series of stress sensitivity experiments for the unconsolidated sandstone were carried out, and the influence of mean effective stress on physical parameters was obtained; a comprehensive model for the physical parameters of hydrate reservoir was developed subsequently. With the help of ABAQUS finite element software, the established comprehensive model was verified by the use of the wellbore stability numerical model of hydrate reservoir. The verification results show that ignoring the effect of mean effective stress on the parameters of hydrate formation aggravates the invasion of drilling fluid into the hydrate formation. Besides, ignoring the stress sensitivity of reservoir physical parameters will underestimate the wellbore instability during hydrate drilling, which will be a threat to the safety of gas hydrate drilling. At the end of the drilling operation, the maximum plastic strain of the model for considering and not considering stress sensitivity was 0.0145 and 0.0138, respectively. Therefore, the established comprehensive model will provide a theoretical support for accurately predicting the engineering geological disasters in hydrate development process.     

Atmospheric Correction Over Coastal Turbid Waters of Bay of Bengal Using OCEANSAT-I Ocean Colour Monitor (OCM) Data

Space-borne ocean-colour remote sensor-detected radiance is heavily contaminated by solar radiation backscattered by the atmospheric air molecules and aerosols. Hence, the first step in ocean-colour data processing is the removal of this atmospheric contribution from the sensor-detected radiance to enable detection of optically active oceanic constituents e.g. chlorophyll-a, suspended sediment etc. In standard atmospheric correction procedure for OCEANSAT-1 Ocean Colour Monitor (OCM) data, NIR bands centered at 765 and 865 nm wavelengths were used for aerosol characterization. Due to high absorption by water molecules, ocean surface in these two wavelengths acts as dark background, therefore, sensor detected radiance can be assumed to have major contribution from atmospheric scattering. For coastal turbid waters this assumption of dark surface fails due to the presence of highly scattering sediments which causes sufficient water-leaving radiance in NIR bands and lead to over-estimation of aerosol radiance resulting in negative water leaving radiance for λ < 700 nm. In the present study, for the turbid coastal waters in the northern Bay of Bengal, the concept of spatial homogeneity of aerosol and water leaving reflectance has been applied to perform atmospheric correction of OCAEANSAT-1 OCM data. The results of the turbid water atmospheric correction have also been validated using in-situ measured water-leaving radiance. Comparison of satellite derived water-leaving radiance for five coastal stations with in-situ measured radiance spectra, indicates an improvement over the standard atmospheric correction algorithm giving physically realistic and positive values. Root Mean Square Error (RMSE) between the in-situ measured and satellite derived water leaving radiance for wavelengths 412 nm, 443 nm, 490 nm, 512 nm and 555 nm was found to be 1.11, 0.718, 0.575, 0.611 and 0.651%, respectively, using standard atmospheric correction procedure. By the use of spatial homogeneity concept, this error was reduced to 0.125, 0.173, 0.176, 0.225, and 0.290 and the correlation coefficient arrived at 0.945, which is an improvement over the standard atmospheric correction procedure.     

A review of the NEMURO and NEMURO.FISH models and their application to marine ecosystem investigations

The evolution of the North Pacific Ecosystem Model for Understanding Regional Oceanography (NEMURO) family of models to study marine ecosystems is reviewed. Applications throughout the North Pacific have shown the models to be robust and to be able to reproduce 1D, 2D and 3D components of nutrient, carbon cycle and biogeochemical cycles as well as aspects of the lower trophic levels ecosystem (phyto- and zooplankton). NEMURO For Including Saury and Herring, an extension that includes higher trophic levels, can be run uncoupled or coupled to NEMURO. In the uncoupled mode, the growth and weight of an individual fish is computed using plankton densities simulated by NEMURO but with no feedback between fish consumption and plankton mortality. In the coupled mode, the feeding, growth and weight of a representative fish are computed, and prey removals due to feeding by fish appear as mortality terms on the prey. The NEMURO family of models continues to evolve, including effects of the microbial loop and iron limitation at lower trophic levels, and full life cycle, multi-species and multi-generational simulations at higher trophic levels. We outline perspectives for future end-to-end modeling efforts that can be used to study marine ecosystems in response to global environmental change.