New observations on high‐pressure phases in a shock melt vein in the Villalbeto de la Peña meteorite: Insights into the shock behavior of diopside

The petrology and mineralogy of shock melt veins in the L6 ordinary chondrite host of Villalbeto de la Peña, a highly shocked, L chondrite polymict breccia, have been investigated in detail using scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and electron probe microanalysis. Entrained olivine, enstatite, diopside, and plagioclase are transformed into ringwoodite, low‐Ca majorite, high‐Ca majorite, and an assemblage of jadeite‐lingunite, respectively, in several shock melt veins and pockets. We have focused on the shock behavior of diopside in a particularly large shock melt vein (10 mm long and up to 4 mm wide) in order to provide additional insights into its high‐pressure polymorphic phase transformation mechanisms. We report the first evidence of diopside undergoing shock‐induced melting, and the occurrence of natural Ca‐majorite formed by solid‐state transformation from diopside. Magnesiowüstite has also been found as veins injected into diopside in the form of nanocrystalline grains that crystallized from a melt and also occurs interstitially between majorite‐pyrope grains in the melt‐vein matrix. In addition, we have observed compositional zoning in majorite‐pyrope grains in the matrix of the shock‐melt vein, which has not been described previously in any shocked meteorite. Collectively, all these different lines of evidence are suggestive of a major shock event with high cooling rates. The minimum peak shock conditions are difficult to constrain, because of the uncertainties in applying experimentally determined high‐pressure phase equilibria to complex natural systems. However, our results suggest that conditions between 16 and 28 GPa and 2000–2200 °C were reached.     

Compositions and microstructures of CB sulfides: Implications for the thermal history of the CB chondrite parent body

We studied textures and compositions of sulfide inclusions in unzoned Fe,Ni metal particles within CBa Gujba, CBa Weatherford, CBb HH 237, and CBb QUE 94411 in order to constrain formation conditions and secondary thermal histories on the CB parent body. Unzoned metal particles in all four chondrites have very similar metal and sulfide compositions. Metal particles contain different types of sulfides, which we categorize as: homogeneous low‐Cr sulfides composed of troilite, troilite‐containing exsolved daubreelite lamellae, arcuate sulfides that occur along metal grain boundaries, and shock‐melted sulfides composed of a mixture of troilite and Fe, Ni metal. Our model for formation proposes that the unzoned metal particles were initially metal droplets that formed from splashing by a partially molten impacting body. Sulfide inclusions later formed as a result of precipitation of excess S from solid metal at low temperatures, either during single stage cooling or during a reheating event by impacts. Sulfides containing exsolution lamellae record temperatures of ?600 °C, and irregular Fe‐FeS intergrowth textures suggest localized shock melting, both of which are indicative of heterogeneous heating by impact processes on the CB parent body. Our study shows that CBa and CBb chondrites formed in a similar environment, and also experienced similar secondary impact processing.     

Performance results of HESP physical model

As a continuation to the published work on model based calibration technique with HESP(Hanle Echelle Spectrograph) as a case study, in this paper we present the performance results of the technique. We also describe how the open parameters were chosen in the model for optimization, the glass data accuracy and handling the discrepancies. It is observed through simulations that the discrepancies in glass data can be identified but not quantifiable. So having an accurate glass data is important which is possible to obtain from the glass manufacturers. The model’s performance in various aspects is presented using the ThAr calibration frames from HESP during its pre-shipment tests. Accuracy of model predictions and its wave length calibration comparison with conventional empirical fitting, the behaviour of open parameters in optimization, model’s ability to track instrumental drifts in the spectrum and the double fibres performance were discussed. It is observed that the optimized model is able to predict to a high accuracy the drifts in the spectrum from environmental fluctuations. It is also observed that the pattern in the spectral drifts across the 2D spectrum which vary from image to image is predictable with the optimized model. We will also discuss the possible science cases where the model can contribute.     

Altering intertidal sediment topography: effects on biodiversity and ecosystem functioning

Sedimentary marine systems are often highly productive and perform important nutrient regeneration functions as they efficiently decompose organic material. In recent years the role of habitat effects and of species composition in ecosystem functioning has become of interest. Estuarine environments are frequently subject to considerable anthropogenic pressures whilst supporting a variety of habitats ranging from well sorted soft muds through biogenically stable sediments to highly mobile coarse sands. There is therefore considerable spatial complexity in habitat type and faunal composition. This study set out to observe the effects of altering the topographical habitat features of an estuarine mudflat on a range of porewater nutrient concentrations (NH₄⁺, NO₃⁻, NO₂⁻, PO₄³⁻ and SiO) collected from four depths (3, 5, 9, and 12 cm) and on faunal composition. Two treatments (Shelled Nets and Net Controls) were used to alter the topography from simple mud to a mussel shell crumble and were compared to un-manipulated Control areas. Sediment granulometry and organic matter content analyses alongside biological traits analysis of the fauna were also conducted.
Differences were observed in porewater nutrient concentrations between the Control and both netted treatments at 5 cm depth only; the species diversity and abundance were also different in the netted treatments compared to the Controls, although no difference between the two manipulated treatments were observed. The changes in faunal composition were attributed solely to the altered topography and the observed nutrient changes were attributed to the faunal alteration rather than the topographical manipulation.     

Optimization of two GPS/MEMS-IMU integration strategies with application to sports

The application of low-cost L1 GPS receivers integrated with micro-electro-mechanical system (MEMS) inertial measurement units (IMU) allows the continuous observation of position, velocity and orientation which opens new possibilities for comparison of athletes’ performance throughout a racecourse. In this paper, we compare loosely and closely coupled integration strategies under realistic racing scenarios when GPS is partially or completely masked. The study reveals that both integration approaches have a similar performance when the satellite constellation is completed or the outages are short. However, for less than four satellites, the closely coupled strategy clearly outperforms the loosely coupled approach. The second part of the paper is devoted to the important problem of system initialization, because the conventional GPS/IMU alignment methods are no longer applicable when using MEMS-IMU. We introduce a modified coarse alignment method and a quaternion estimation method for the computation of the initial orientation. Simulations and practical experiments reveal that both methods are numerically stable for any initial orientation of the sensors with the error characteristics of MEMS-IMUs. Throughout the paper, our findings are supported by racing experiments with references provided in both, the measurement and the navigation domains.     

Comparison of sedimentation-compression curves obtained by nuclear and gravimetric methods for Wilkinson Basin,Gulf of Maine,sediments

Accurate measurements of bulk density are important in the construction of sedimentation-compression curves of water-saturated, fine-grained cohesive sediments for consolidation studies. The bulk density of five cores was measured nondestructively on a laboratory nuclear transmission densitometer and the water content, expressed as void ratio, was derived from an empirical relationship between bulk density and water content. Bulk density and water content measured destructively was determined every 10 cm for a comparison with the nuclear data. Agreement between nuclear and gravimetric methods was within ± 0.02 g/cm³ for bulk density ranging from 1.2 to 1.4 g/cm³. Sedimentation-compression curves made using both methods were in generally good agreement.In the Wilkinson Basin, void ratio gradually decreases with increasing effective overburden pressure. This indicates that consolidation by dewatering the surficial sediments is normal and that the environmental conditions during deposition remained relatively constant.     

Modeling long-period noise in kinematic GPS applications

We develop and test an algorithm for modeling and removing elevation error in kinematic GPS trajectories in the context of a kinematic GPS survey of the salar de Uyuni, Bolivia. Noise in the kinematic trajectory ranges over 15 cm and is highly autocorrelated, resulting in significant contamination of the topographic signal. We solve for a noise model using crossover differences at trajectory intersections as constraints in a least-squares inversion. Validation of the model using multiple realizations of synthetic/simulated noise shows an average decrease in root-mean-square-error (RMSE) by a factor of four. Applying the model to data from the salar de Uyuni survey, we find that crossover differences drop by a factor of eight (from an RMSE of 5.6 to 0.7 cm), and previously obscured topographic features are revealed in a plan view of the corrected trajectory. We believe that this algorithm can be successfully adapted to other survey methods that employ kinematic GPS for positioning.     

Do free-ranging domestic goats show ‘landscapes of fear’? Patch use in response to habitat features and predator cues

One factor that influences foraging is predation risk. As a result, herbivores may not use landscapes uniformly due to spatial differences in perceived predation risk. Wild herbivores forage across these ‘landscapes of fear’; however, the extent to which domestic herbivores consider them is generally unknown. Using a grid of artificial food patches and measuring giving up densities (GUDs), we mapped landscapes of fear of free-ranging domestic goats on three substrates. In the first experiment, we related GUDs to landscape variables. Goats preferred feeding in open ground with firm substrate compared to a sandy riverbed or a rocky hillside. We suggest that differences relate to escape potential and the occurrence of ambush sites. Landscape variables that influenced feeding effort were patch visibility and plants next to a patch. In a second experiment, we increased predation risk by adding predator dung and urine into the habitats. In response, feeding effort declined across all three habitats. Furthermore, goats only responded to patch visibility and not plants next to the patches. Better sightlines increase predator detection and allow individuals to see group members. Our results indicate that predation risk influences the extent to which free-ranging domestic herbivores utilise landscapes.     

Recent Environmental Change and Atmospheric Contamination on Svalbard as Recorded in Lake Sediments – an Introduction

This paper outlines an interdisciplinary project on recent environmental change and atmospheric contamination on the high Arctic archipelago of Svalbard (76°30′N–80°30′N). It describes the rationale and aims of the project and summarises the location, climate, geology, vegetation, and land-use of Svalbard.