A Simple Method for Simulating Groundwater Interactions with Fens to Forecast Development Effects

Protection of fens–wetlands dependent on groundwater discharge–requires characterization of groundwater sources and stresses. Because instrumentation and numerical modeling of fens is labor intensive, easy-to-apply methods that model fen distribution and their vulnerability to development are desirable. Here we demonstrate that fen areas can be simulated using existing steady-state MODFLOW models when the unsaturated zone flow (UZF) package is included. In cells where the water table is near land surface, the UZF package calculates a head difference and scaled conductance at these “seepage drain” cells to generate average rates of vertical seepage to the land. This formulation, which represents an alternative to blanketing the MODFLOW domain with drains, requires very little input from the user because unsaturated flow-routing is inactive and results are primarily driven by easily obtained topographic information. Like the drain approach, it has the advantage that the distribution of seepage areas is not predetermined by the modeler, but rather emerges from simulated heads. Beyond the drain approach, it takes account of intracell land surface variation to explicitly quantify multiple surficial flows corresponding to infiltration, rejected recharge, recharge and land-surface seepage. Application of the method to a basin in southeastern Wisconsin demonstrates how it can be used as a decision-support tool to first, reproduce fen distribution and, second, forecast drawdown and reduced seepage at fens in response to shallow pumping.     

The transition from porphyry- to epithermal-style gold mineralization at Ladolam, Lihir Island, Papua New Guinea: a reconnaissance study

The exceptionally large gold resource at Ladolam (>1,300 metric tons of gold), Lihir Island, resulted from the transition of an early-stage, low-grade porphyry gold system to a low-sulfidation epithermal gold event. This transition was probably triggered by rapid decompression during the partial slope failure of Luise stratovolcano and accompanied by the ingress of seawater. The original porphyry stage is indicated by remnant hydrothermal breccia clasts of strongly biotite-magnetite altered monzodiorite with disseminated pyrite - chalcopyrite and poorly developed pyrite - quartz stockwork veins. The breccias are overprinted by biotite-magnetite alteration and their matrix is strongly mineralized with disseminated auriferous pyrite. The breccias are cut by late-stage epithermal quartz-chalcedony-illite-adularia-pyrite veins and associated illite-adularia alteration that locally contain bonanza gold grades of up to 120 g/t. Isotope data suggest a magmatic source of sulfur in the gold-bearing fluids at Ladolam. Electronic supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/10.1007/s00126-001-0230-y     

Diagenetic evolution of lower Jurassic platform carbonates flanking the Tazoult salt wall (Central High Atlas,Morocco)

Platform carbonates diagenesis in salt basins could be complex due to potential alterations of fluids related and non-related to diapirism. This paper presents the diagenetic history of the Hettangian to Pliensbachian platform carbonates from the Tazoult salt wall area (central High Atlas, Morocco). Low structural relief and outcrop conditions allowed to define the entire diagenetic evolution occurred in the High Atlas diapiric basins since early stages of the diapiric activity up to their tectonic inversion. Precipitation of dolomite and calcite from both warmed marine-derived and meteoric fluids characterised diagenetic stages during Pliensbachian, when the carbonate platforms were exposed and karstified. Burial diagenesis occurred from Toarcian to Middle Jurassic, due to changes of salt-induced dynamic related to increase in siliciclastic input, fast diapir rise and rapid burial of Pliensbachian platforms. During this stage, the diapir acted as a physical barrier for fluid circulation between the core and the flanking sediments. In the carbonates and breccias flanking the structures, dolomite and calcite precipitated from basinal brines, whereas carbonate slivers located in the core of the structure, were affected by the circulation of Mn-rich fluids. The final diagenetic event is characterised by the income of meteoric fluids into the system during uplift caused by Alpine orogeny. These results highlight the relevant influence of diapirism on the diagenetic modifications in salt-related basins in terms of diagenetic events and involved fluids.     

The effects of secondary processing in the unique carbonaceous chondrite Miller Range 07687

Our detailed mineralogical, elemental, and isotopic study of the Miller Range (MIL) 07687 meteorite showed that, although this meteorite has affinities to CO chondrites, it also exhibits sufficient differences to warrant classification as an ungrouped carbonaceous chondrite. The most notable feature of MIL 07687 is the presence of two distinct matrix lithologies that result from highly localized aqueous alteration. One of these lithologies is Fe‐rich and exhibits evidence for interaction with water, including the presence of fibrous (dendritic) ferrihydrite. The other lithology, which is Fe‐poor, appears to represent relatively unaltered protolith material. MIL 07687 has presolar grain abundances consistent with those observed in other modestly altered carbonaceous chondrites: the overall abundance of O‐rich presolar grains is 137 ± 3 ppm and the overall abundance of SiC grains is 71 ± 11 ppm. However, there is a large difference in the observed O‐rich and SiC grain number densities between altered and unaltered areas, reflecting partial destruction of presolar grains (both O‐ and C‐rich grains) due to the aqueous alteration experienced by MIL 07687 under highly oxidizing conditions. Detailed coordinated NanoSIMS‐TEM analysis of a large hotspot composed of an isotopically normal core surrounded by a rim composed of ¹⁷O‐rich grains is consistent with either original condensation of the core and surrounding grains in the same parent AGB star, or with grain accretion in the ISM or solar nebula.     

Sediment grain size measurements are affected by site-specific sediment characteristics and analysis methods: implications for environmental monitoring

Sediment grain size, and specifically changes in the percent mud content (i.e. the fraction <63?µm) over time is often used as an indicator of estuarine environmental health. Using sediment samples from three distinct estuarine systems, we determined that different analytical methods (laser diffraction and wet sieving) gave significantly different results in terms of percent mud content. These differences are also ecologically meaningful when considering the influence of mud on estuarine macrofauna. We propose an approach to measuring sediment grain size termed Environmentally Available Sediment (EAS), which advocates for the measurement of the sediment that biota are directly exposed to. For the purposes of environmental monitoring, it is also essential to monitor sediment grain size in a repeatable way which is likely to be achieved using consistent (or no) pre-treatment and the use of a measurement technique that is unlikely to change over time, e.g. wet sieving.     

Resurge gullies and “inverted sombrero” morphology,Flynn Creek impact structure,Tennessee

The Flynn Creek impact structure is an approximately 3.8 km diameter, marine‐target impact structure, which is located in north central Tennessee, USA. The target stratigraphy consists of several hundreds of meters of Ordovician carbonate strata, specifically Knox Group through Catheys‐Leipers Formation. Like other, similarly sized marine‐target impact craters, Flynn Creek's crater moat‐filling deposits include, in stratigraphic order, gravity‐driven slump material, aqueous resurge deposits, and secular (postimpact) aqueous settling deposits. In the present study, we show that Flynn Creek also possesses previously undescribed erosional resurge gullies and an annular, sloping surface that comprises an outer crater rim surrounding an inner, nested bowl‐shaped crater, thus forming a concentric crater structure. Considering this morphology, the Flynn Creek impact structure has a crater shape that has been referred to at other craters as an “inverted sombrero.” In this paper, we describe the annular rim and the inner crater at Flynn Creek using geographic information system technology. We relate these geomorphic features to the marine environment of crater formation, and compare the Flynn Creek impact structure with other marine‐target impact structures having similar features.     

Antenna phase center calibration for precise positioning of LEO satellites

Phase center variations of the receiver and transmitter antenna constitute a remaining uncertainty in the high precision orbit determination (POD) of low Earth orbit (LEO) satellites using GPS measurements. Triggered by the adoption of absolute phase patterns in the IGS processing standards, a calibration of the Sensor Systems S67-1575-14 antenna with GFZ choke ring has been conducted that serves as POD antenna on various geodetic satellites such as CHAMP, GRACE and TerraSAR-X. Nominal phase patterns have been obtained with a robotic measurement system in a field campaign and the results were used to assess the impact of receiver antenna phase patterns on the achievable positioning accuracy. Along with this, phase center distortions in the actual spacecraft environment were characterized based on POD carrier phase residuals for the GRACE and TerraSAR-X missions. It is shown that the combined ground and in-flight calibration can improve the carrier phase modeling accuracy to a level of 4 mm which is close to the pure receiver noise. A 3.5 cm (3D rms) consistency of kinematic and reduced dynamic orbit determination solutions is achieved for TerraSAR-X, which presumably reflects the limitations of presently available GPS ephemeris products. The reduced dynamic solutions themselves match the observations of high grade satellite laser ranging stations to 1.5 cm but are potentially affected by cross-track biases at the cm-level. With respect to the GPS based relative navigation of TerraSAR-X/TanDEM-X formation, the in-flight calibration of the antenna phase patterns is considered essential for an accurate modeling of differential carrier phase measurements and a mm level baseline reconstruction.

Geochemistry of surface sediments in an acid stream estuary

Selective chemical attack has been used to separate recent surface marine sediments into organic, non-detrital and detrital components, and the concentrations of iron, manganese, copper and zinc in each fraction determined. The non-detrital fraction controlled the overall elemental concentrations and relationships apparent in the bulk sediment, particularly in the cases of copper, manganese and zinc. Copper was found associated with the organic fraction. The predominant processes of primary deposition are precipitation of hydrated ferric oxide and adsorption of copper and zinc onto this material.     

Phenotypic plasticity of Acanthoscaphites tridens (Late Cretaceous ammonites): additional data

The concept of phenotypic plasticity of the temporal species Acanthoscaphites tridens s. str., as recently proposed by myself is elaborated upon, in response to issues raised in a commentary to the original paper. The terms phenomorphic class and dominant phenotype are explained in greater detail, as well as the evaluation of phenotypic plasticity in studies for extinct species.