地球介质的非定常参数黏弹模型

用开尔文黏弹模型对实验蠕变曲线和冰后期地面抬升观测曲线进行反演,得到相关的黏弹参数,发现所有的黏弹参数都随实验（或观测）时间长度发生有规律的变化, 表明黏弹参数是实验(或观测)时间的函数.在此基础上提出非定常参数的黏弹模型,将通常采用的剪切模量μ₂、弛豫时间τ 和黏度η 相应地从常数修正为时间的函数μ₂(t)、τ(t) 和η（t）,检验表明修正后的开尔文模型可以更好地符合实测蠕变曲线.用修正后的μ₂(t)对软流层的黏度进行估算,其值约为4.6×10²⁰ Pa·s.     

Caractérisation de la structure interne et de l'état hydrique de glissements argilo-marneux par tomographie géophysique : l'exemple du glissement-coulée de Super-Sauze (Alpes du Sud,France)

Geophysical methods such as seismic surveying and electrical resistivity imaging appear to be well-adapted to investigate and understand landslide mechanisms. They allow direct and non-intrusive measurement of acoustic velocity and electrical resistivity, two fundamental parameters used to define the physical properties of the reworked moving materials. Both methods were applied at the Super-Sauze site in the French South Alps, where a typical example of an intra-material earthflow-mudslide can be observed. Measurements were taken simultaneously along two orthogonal profiles: one 325 m in length is perpendicular to the axis of the earthflow; the other 235 m in length is located along the axis of the earthflow. The results show a correlation between the seismic and electrical resistivity data, confirming that the simultaneous use of both methods gives complementary information about landslide mechanisms. The seismic data provide information on fracture density variations, whereas the electrical resistivity data provide information on water content variations. To cite this article: G. Grandjean et al., C. R. Geoscience 338 (2006).     

Effect of increasing temperatures on cooling systems. A case of study: European greenhouse sector

The work attempts to assess the effects of global warming on the efficacy of current greenhouse cooling methods following a methodology previously proved for other agricultural buildings. The cooling potential of four greenhouse cooling techniques (natural ventilation, forced ventilation, fogging and shading) were simulated by computer modelling for five European locations, calculating the greenhouse internal air temperature from measured external climate data. Four 2080s scenarios were analysed in these five locations. They were constructed as a combination of General Circulation Models (Had CM3 and ECHAM4) downscaled for Europe with the HIRHAM and RCA3 regional models and driven by the A2 and B2 socio-economic scenarios. The crop considered as reference was tomato. The results showed that, in locations in southern Europe, adding evaporative cooling methods to ventilation and/or shading will be indispensable. In some areas of northern Europe, natural ventilation will no longer be sufficient, and shading or fogging will also be necessary. The economic consequences will be important, over all in the southern locations where water consumption, investment and working costs will be higher and necessary to ensure the crop production.     

Mapping subvertical discontinuities in rock cuts using a 400-MHz ground penetrating radar antenna

Hidden subvertical discontinuities oriented parallel to subparallel to the exposed faces of outcropping sandstone were effectively mapped at three different study sites in central Missouri using a ground-penetrating radar system (GPR) equipped with a 400-MHz monostatic antenna and a survey wheel. At each site, a suite of 2-D ground-penetrating radar profiles were acquired along multiple closely spaced traverses on relatively smooth exposed rock surfaces. Time-zero correction was applied to the raw GPR data which were then processed using band-pass filtering, range and display gain, color transformation, and deconvolution techniques. Pseudo 3D images of each identified discontinuity at each site were constructed based on the interpretation of the nonmigrated ground-penetrating radar profiles. These pseudo 3D images were hand-migrated and transformed into true 3D images which depict variable depths at “perpendicular horizontal distance” to each discontinuity relative to the exposed rock face. The results demonstrate that GPR can be used to detect and map hidden discontinuities. This information can then be used for rock slope stability analysis and rock engineering purposes.     

Lithological mapping with multispectral data–setup and application of a spectral database for rocks in the Balakot area,Northern Pakistan

In the frame of landslide susceptibility assessment, a spectral library was created to support the identification of materials confined to a particular region using remote sensing images. This library, called Pakistan spectral library (pklib) version 0.1, contains the analysis data of sixty rock samples taken in the Balakot region in Northern Pakistan. The spectral library is implemented as SQLite database. Structure and naming are inspired by the convention system of the ASTER Spectral Library. Usability, application and benefit of the pklib were evaluated and depicted taking two approaches, the multivariate and the spectral based. The spectral information were used to create indices. The indices were applied to Landsat and ASTER data to support the spatial delineation of outcropping rock sequences in stratigraphic formations. The application of the indices introduced in this paper helps to identify spots where specific lithological characteristics occur. Especially in areas with sparse or missing detailed geological mapping, the spectral discrimination via remote sensing data can speed up the survey. The library can be used not only to support the improvement of factor maps for landslide susceptibility analysis, but also to provide a geoscientific basis to further analyze the lithological spot in numerous regions in the Hindu Kush.