Statistical landslide susceptibility assessment of the Mansehra and Torghar districts,Khyber Pakhtunkhwa Province,Pakistan

This paper presents laboratory experiments and numerical simulations of effects of submerged obstacles on tsunami-like solitary wave and its run-up. This study was carried out for the breaking and non-breaking solitary waves on 1:19.85 uniform slope which contains a submerged obstacle. New laboratory experiments are performed to describe the mitigation of tsunami amplitude and run-up under the effect of submerged obstacles. We are based on experimental results obtained to validate the numerical model. The numerical modeling using COULWAVE aims essentially to show the effect of the obstacle on the shape of solitary wave and the limit of this effect. Using a multiple nonlinear regression, we have determined a model to estimate height of run-up according to the amplitude of the wave and the obstacle peak depth.     

Cd(II), Pb(II) and Zn(II) Removal from Contaminated Water by Biosorption Using Activated Sludge Biomass

Biosorption using activated sludge biomass (ASB) as a potentially sustainable technology for the treatment of wastewater containing different metal ions (Cd(II), Pb(II) and Zn(II)) was investigated. ASB metal uptake clearly competed with protons consumed by microbial biomass compared with control tests with non‐activated sludge biomass. Biosorption tests confirmed maximum exchange between metal ions and protons at pH 2.0–4.5. It was revealed by the study that the amount of metal ions released from the biomass increased with biomass sludge concentration. The result showed that maximum absorption of metal ions was observed for Cd(II) at pH 3.5, Pb(II) at pH 4.0, and pH 4.5 for Zn(II) ions. The maximum absorption capacities of ASB for Cd(II), Pb(II) and Zn(II) were determined to be 59.3, 68.5 and 86.5%, respectively. The biosorption of heavy metals was directly proportional to ASB stabilization corresponding to a reduction in heavy metals in the order of Cd < Pb < Zn. The order of increase of biosorption of metal ions in ASB was Zn(II) < Pb(II) < Cd(II), and this was opposite to that of non active sludge. The results indicate that ASB is a sustainable tools for the bioremediation of Cd(II), Pb(II) and Zn(II) ions from industrial sludge and wastewater treatment plants.     

A geocomputational analysis of Twitter activity around different world cities

The penetration and use of social media services differs from city to city. This paper is aimed to provide a comparison of the use of Twitter between different cities of the world. We present a temporal analysis of activity on Twitter in 15 cities. Our study consists of two parts: First, we created temporal graphs of the activity in the 15 cities, through which hours of high and low activity could be identified. Second, we created heat map visualizations of the Twitter activities during the period of 19 September 2012–25 September 2013. The heat map visualizations make the periods of intense and sparse activity apparent and provide a snapshot of the activity during the whole year.     

Analysis and farmers’ perception of climate change in the Kashmir Valley,India

Theoretical and Applied Climatology - Analysis of climatic variables is important for the detection and attribution of climate change trends and has received considerable attention from researchers...     

A new approach for developing comprehensive agricultural drought index using satellite-derived biophysical parameters and factor analysis method

The accurate assessment of drought and its monitoring is highly depending on the selection of appropriate indices. Despite the availability of countless drought indices, due to variability in environmental properties, a single universally drought index has not been presented yet. In this study, a new approach for developing comprehensive agricultural drought index from satellite-derived biophysical parameters is presented. Therefore, the potential of satellite-derived biophysical parameters for improved understanding of the water status of pistachio (Pistachio vera L.) crop grown in a semiarid area is evaluated. Exploratory factor analysis with principal component extraction method is performed to select the most influential parameters from seven biophysical parameters including surface temperature (T _s), surface albedo (α), leaf area index (LAI), soil heat flux (G _o), soil-adjusted vegetation index (SAVI), normalized difference vegetation index (NDVI), and net radiation (R _n). T _s and G _o were found as the most effective parameters by this method. However, T _s, LAI, α, and SAVI that accounts for 99.6 % of the total variance of seven inputs were selected to model a new biophysical water stress index (BPWSI). The values of BPWSI were stretched independently and compared with the range of actual evapotranspiration estimated through well-known METRIC (mapping evapotranspiration at high resolution with internal calibration) energy balance model. The results showed that BPWSI can be efficiently used for the prediction of the pistachio water status (RMSE of 0.52, 0.31, and 0.48 mm/day on three image dates of April 28, July 17, and August 2, 2010). The study confirmed that crop water status is accounted by several satellite-based biophysical parameters rather than single parameter.     

Groundwater vulnerability to pesticides in Northwest Bangladesh

The transport and leaching potential hazards of various pesticides were studied in a shallow unconfined aquifer located in Northwest Bangladesh. Pesticide leaching potential was quantified using a one-dimensional advective–dispersive transport equation for a non-conservative chemical that follows first-order decay and linear adsorption in soils. Leaching potential index (LPI) was calculated for 69 sites in the study area to evaluate the relative vulnerability to pesticide leaching and to prioritize sites for model study and soil sampling. The numerical ranks of computed LPI were grouped by quantiles into very high, high, moderate, low and very low categories; and based on these rankings, the most vulnerable site was selected. The fate and transport of pesticides in this most vulnerable site was modeled using MT3D. The model results indicate that pesticides with high sorptivity and moderate to high persistence have low potential impact on groundwater. Top soils are found to be particularly vulnerable to the accumulation of organochlorine pesticides. Results also revealed that decreasing the soil organic matter and increasing the half-life of the pesticides at deeper depths did not make any significant change. Finally, six soil samples were collected from the same site at depths of 0.0, 1.5, 3.0, 4.5, 6.0, and 7.5 m for the analysis of pesticide residues. The soil–water was extracted from the samples following standard extraction technique and tested using gas chromatography (GC) and high-performance liquid chromatography (HPLC) for pesticide residues. Results showed no trace of pesticide residues in the soil–water; however, a few unknown peaks were detected indicating the use of some unknown brand of chemicals in the study area.     

Lattice Boltzmann Models for Flow and Transport in Saturated Karst

Flow and transport simulation in karst aquifers remains a significant challenge for the ground water modeling community. Darcy's law–based models cannot simulate the inertial flows characteristic of many karst aquifers. Eddies in these flows can strongly affect solute transport. The simple two-region conduit/matrix paradigm is inadequate for many purposes because it considers only a capacitance rather than a physical domain. Relatively new lattice Boltzmann methods (LBMs) are capable of solving inertial flows and associated solute transport in geometrically complex domains involving karst conduits and heterogeneous matrix rock. LBMs for flow and transport in heterogeneous porous media, which are needed to make the models applicable to large-scale problems, are still under development. Here we explore aspects of these future LBMs, present simple examples illustrating some of the processes that can be simulated, and compare the results with available analytical solutions. Simulations are contrived to mimic simple capacitance-based two-region models involving conduit (mobile) and matrix (immobile) regions and are compared against the analytical solution. There is a high correlation between LBM simulations and the analytical solution for two different mobile region fractions. In more realistic conduit/matrix simulation, the breakthrough curve showed classic features and the two-region model fit slightly better than the advection-dispersion equation (ADE). An LBM-based anisotropic dispersion solver is applied to simulate breakthrough curves from a heterogeneous porous medium, which fit the ADE solution. Finally, breakthrough from a karst-like system consisting of a conduit with inertial regime flow in a heterogeneous aquifer is compared with the advection-dispersion and two-region analytical solutions.     

The effect of discontinuity frequency on ground vibrations produced from bench blasting: A case study

A good number of empirical formulae and methods dealing with the analysis of the effects of blast-induced ground vibrations have been developed. The most common approach suggested for estimating the attenuation of particle velocity on the ground is to scale the distance (scaled distance, SD). This approach makes it possible to estimate the peak particle velocity when the amount of explosive charge or the distance or both are altered.Many parameters known to have an influence on particle velocity have been used for particle velocity prediction equations. Some of these parameters are maximum charge per delay, the distance between the station and shot location, burden, inelastic attenuation factor and site factors. However, the impacts of the discontinuities existing on the benches where blasts are detonated on the propagation velocity of seismic waves have not been taken into consideration in these equations.This study aims to examine the impacts of the discontinuity frequency parameter derived through geological measurements carried out on the blasting benches or nearby in a quarry mine (Supren, Eskisehir) in Turkey on the propagation of blast-induced ground vibrations. Developed based on the geological observations carried out on the benches, the model was formed by adding discontinuity frequency parameter to the particle velocity prediction model suggested by Nicholls et al. [Nicholls HR, Johnson CF, Duvall WI. Blasting vibrations and their effects on structures. Bulletin no. 656. Washington, DC: US Bureau of Mines; 1971]. In order to research the effect of the discontinuity frequency in the bench on the blast-induced ground vibrations, the relationship between the recorded peak particle velocity, scaled distance and discontinuity frequency was statistically evaluated for the site. The established relationship and the results of the study are presented.     

Impact of future climate change on wheat production in relation to plant-available water capacity in a semiaridenvironment

Conceptions encompassing climate change are irreversible rise of atmospheric carbon dioxide (CO₂) concentration, increased temperature, and changes in rainfall both in spatial- and temporal-scales worldwide. This will have a major impact on wheat production, particularly if crops are frequently exposed to a sequence, frequency, and intensity of specific weather events like high temperature during growth period. However, the process of wheat response to climate change is complex and compounded by interactions among atmospheric CO₂ concentration_, climate variables, soil, nutrition, and agronomic management. In this study, we use the Agricultural Production Systems sIMulator (APSIM)-wheat model, driven by statistically downscaled climate projections of 18 global circulation models (GCMs) under the 2007 Intergovernmental Panel on Climate Change (IPCC) Special Report on Emission Scenarios (SRES) A2 CO₂ emission scenario to examine impact on future wheat yields across key wheat growing regions considering different soil types in New South Wales (NSW) of Australia. The response of wheat yield, yield components, and phenology vary across sites and soil types, but yield is closely related to plant available water capacity (PAWC). Results show a decreasing yield trend during the period of 2021–2040 compared to the baseline period of 1961–1990. Across different wheat-growing regions in NSW, grain yield difference in the future period (2021–2040) over the baseline (1961–1990) varies from +3.4 to ?14.7 %, and in most sites, grain number is decreased, while grain size is increased in future climate. Reduction of wheat yield is mainly due to shorter growth duration, where average flowering and maturing time are advanced by an average of 11 and 12 days, respectively. In general, larger negative impacts of climate change are exhibited in those sites with higher PAWC. Current wheat cultivars with shorter growing season properties are viable in the future climate, but breading for early sowing wheat varieties with longer growing duration will be a desirable adaptation strategy for mitigating the impact of changing climate on wheat yield.