C, O, S and Sr isotope studies on the genesis of Fe-carbonate and barite mineralizations in the Attepe iron district (Adana, Southern Turkey)

The Attepe district consists of Precambrian, Lower–Middle Cambrian, Upper Cambrian–Lower Ordovician and Mesozoic formations. It contains several iron deposits and occurrences. Three types of iron-mineralizations can be distinguished in the area; (i) Sedimentary Fe-sulfide in Precambrian bituminous metapelitic rocks, and Fe-oxides in Precambrian metasandstones (SISO), (ii) vein-type Fe-carbonate and oxides composed of mainly siderite, ankerite and hematite including barite in Lower–Middle Cambrian metacarbonates of the Çaltepe Formation (HICO), (iii) karstic Fe-oxides and hydroxides essentially in the Lower–Middle Cambrian metacarbonates and the unweathered Fe-carbonates (KIO). The latter type is more widespread and located at the upper parts of the most important mineable iron deposits like Attepe deposit.

Oxygen-, carbon-, sulfur- and strontium-isotope studies have been performed on siderites and barites in the vein-type ores, and on calcites in the recrystallized Çaltepe Limestones to investigate the sources and formation mechanism of primary ore-forming constituents. The δ¹³C values of siderites and calcites in limestones of the Çaltepe Formation range from −10.10‰ to −8.20‰, and from −0.8‰ to 2.30‰. Both carbonate minerals show δ¹⁸O values between 17.50–18.30‰ and 16.20–23.00‰, respectively. The δ¹³C and δ¹⁸O isotopic variations do not indicate any direct or linear relations between siderites and limestones. However, it is possible that the carbon and oxygen isotopic compositions of carbonate minerals could be changed to some extent, when limestones were subjected to hydrothermal processes or thermal alterations during metamorphism.

The isotopic values of barites display 32.40–38.30‰ for δ³⁴S and 12.20–14.70‰ for δ¹⁸O. The strontium isotope ratios (0.717169–0.718601) of barites and the sulfur isotope compositions of barites and pyrites suggest that there are no direct linkages of ore-forming compounds neither with a magmatic source nor with sedimentary pyrite formations in the Precambrian bituminous shales of the Attepe formation.

According to the field observations and the stable isotope data, siderites and ankerites should be formed by interaction between iron-rich hydrothermal fluids and Çaltepe limestones, whereas isotope ratios of barites indicate that they were formed by mixing of sulfur-rich meteoric waters and deeply circulated hydrothermal solutions.     

A field application for lime stabilization

This study presents the improvements achieved as a result of the lime stabilization application conducted by the joint effort of the Turkish Association of Lime Industrialists and the General Directorate of Rural Services on the 200 m long section of the Ankara Province Yukar? Yurtçu Village road where green and brown clays are dominant. The study also numerically demonstrates the impacts of these improvements on the road section based on the results of various laboratory and field tests. The lime stabilization in field conditions was performed with 5% lime for both clays and was applied as a 30 cm thick single layer. In the soaked California bearing-ratio (CBR) tests conducted in the laboratory, increases that reach up from 16 and 21 times compared to initial soaked CBR values were observed in green and brown clays, respectively, at the end of 28 days. The high increases observed in soaked CBR values would reduce the upper layer thickness of the roads. The similar improvements are also achieved in unconfined compression and plate loading tests. The comparisons performed with the plate loading tests clearly demonstrated the behavior of the surface to lime and its cure impact.     

Landslide susceptibility mapping using Bayesian approach in the Sultan Mountains (Akşehir,Turkey)

Landslides cause heavy damage to property and infrastructure, in addition to being responsible for the loss of human lives in many parts of the Turkey. The paper presents GIS-based spatial data analysis for landslide susceptibility mapping in the regions of the Sultan Mountains, West of Akşehir, and central part of Turkey. Landslides occur frequently in the area and seriously affect local living conditions. Therefore, spatial analysis of landslide susceptibility in the Sultan Mountains is important. The relationships between landslide distributions with the 19 landslide affecting parameters were analysed using a Bayesian model. In the study area, 90 landslides were observed. The landslides were randomly subdivided into 80 training landslides and 10 test landslides. A landslide susceptibility map was produced by using the training landslides. The test landslides were used in the accuracy control of the produced landslide susceptibility map. Approximately 9% of the study area was classified as high susceptibility zone. Medium, low and very low susceptibility zones covered 8, 23 and 60% of the study area, respectively. Most of the locations of the observed landslides actually fall into moderate (17.78%) and high (77.78. %) susceptibility zones of the produced landslide susceptibility map. This validates the applicability of proposed methods, approaches and the classification scheme. The high susceptibility zone is along both sides of the Akşehir Fault and at the north-eastern slope of the Sultan Mountains. It was determined that the surface area of the Harlak and Deresenek formations, which have attained lithological characteristics of clayey limestone with a broken and separated base, and where area landslides occur, possesses an elevation of 1,100–1,600 m, a slope gradient of 25°–35° and a slope aspect of 22.5°–157.5° facing slopes.     

基于GIS的土耳其国际保护区G(o)ksu河水质的调查与建模

Gksu Delta is an important wetland where the Gksu River reaches to sea in the eastern of the town Tasucu-Ice1. The delta is classified as a Wetland of International Impor-tance according to the Ramsar Convention on Wetlands of International Importance. The amount of fertilizers used in this area was 7200 tons in 2006. These pollutants affect the surface and groundwater quality negatively. The intensively used fertilizers and pesticides contain not only N- and P compounds but also some heavy metals. The contents of all pol-lutants in surface waters were determined for four different seasons between 2006 and 2008 and with these data a Geographic Information System (GIS) has been constructed by using Map Info. From the photometric heavy metal analysis, it is inferred that the excess concen-tration of Fe, Ni, Mn, Mo and Cu at some locations is the cause of undesirable quality for drinking purposes. The source of excess concentration of various heavy metals is the agri-cultural activities and fertilizers. It is determined that in all periods between 2006 and 2008 the heavy metals and other pollutants in the fertilizers and pesticides transported easily to river water with irrigation return flow. The organic pollutants, including COD, BOD, NH3 and NO3 followed the sharply increasing trends from Silifke city to Mediterranean Sea. The water quality of Gksu River is modeled and determined that the waste water discharge of 10,700 m3/day from Silifke city does not create a serious problem because of the high amount of flow rate of Gksu River.     

An Analysis of the Light Curves of the Early-Type Binary BF Aurigae

The UBV observations of the massive binary BF Aur were made at the Ankara University Observatory during 1988, 1989 and 1996. Asymmetry of the light curves, arising from unequal height of successive maxima, indicates that the system is active. By analysing these observations in the framework of the Roche model (including the presence of bright regions on the components) one obtains a semidetached configuration of the system, with the cooler secondary component filling its Roche lobe. The analysis of the light curves yields consistent solutions for mass ratio q = m₂/m₁ somewhat less than one. The influence of the mass transfer on the change of the system-orbital-period is relatively small. The upward parabolic character of the O–C diagram (Zhang et al., 1993) indicates a mass transfer from the less massive secondary to the more massive primary. This inturn requires the less massive secondary to fill its Roche lobe. This is consistent with our solution. Based on these facts we introduced the following working hypothesis. At the place where the gas stream from the secondary falls on the primary, relatively small in size but a high temperature contrast active hot-spot (hs) region is formed. As a result of the heating effect caused by the irradiation of the hot-spot region, on the secondary's side facing the hot spot a bright-spot (bs) region is formed. The bright-spot region is larger in size but with significantly lower temperature than the hot spot. This region can be treated as a ‘reflection cap’. By analysing the light curves in the framework of this working hypothesis the basic parameters of the system and the active regions are estimated. The problem is solved in two stages: by obtaining a synthetic light curve in the case when the parameters of the corresponding Close Binary (CB) Roche model (Djurašević, 1992a) are given a priori (the direct problem) and by determining the parameters of the given model for which the best fit between the synthetic light curve and the observations is achieved (the inverse problem) (Djurašević, 1992b). This revised version was published online in July 2006 with corrections to the Cover Date.     

An experimental study of the intensity and stability of thermoremanent magnetization acquired by synthetic monodomain titanomagnetite substituted by aluminium

Summary. Titanomagnetites of composition Fe_2.4-δAl_δTi_0.6O₄ and Fe_2.6-δAl_δTi_0–4O₄(δ=0, 0.1 and 0.2 in both cases) were prepared in the monodomain state by pulverization of sintered synthetic material. In low fields, the thermoremanence (TRM) was found to be linear with inducing field and of high enough intensity to account for typical natural remanent magnetizations of fresh submarine basalts. The higher field TRM acquisition curves follow the Néel model curve for an assemblage of non-interacting identical particles in a general way only, the differences being due to interactions, or the range of particle blocking temperatures and volumes or other features of the samples not included in the model. The unblocking temperatures of low field TRM lie in a narrow range below the Curie point. The low field TRM is very resistant to alternating field demagnetization and provides a very striking illustration of the strength of the TRM mechanism in preserving a stable record of a weak magnetic field. The result of a Lowrie-Fuller test on the material is consistent with the monodomain state.     

Nondestructive spectroscopic and petrochemical investigations of Paleoarchean spherule layers from the ICDP drill core BARB5, Barberton Mountain Land,South Africa

A Paleoarchean impact spherule‐bearing interval of the 763 m long International Continental Scientific Drilling Program (ICDP) drill core BARB5 from the lower Mapepe Formation of the Fig Tree Group, Barberton Mountain Land (South Africa) was investigated using nondestructive analytical techniques. The results of visual observation, infrared (IR) spectroscopic imaging, and micro‐X‐ray fluorescence (μXRF) of drill cores are presented. Petrographic and sedimentary features, as well as major and trace element compositions of lithologies from the micrometer to kilometer‐scale, assisted in the localization and characterization of eight spherule‐bearing intervals between 512.6 and 510.5 m depth. The spherule layers occur in a strongly deformed section between 517 and 503 m, and the rocks in the core above and below are clearly less disturbed. The μXRF element maps show that spherule layers have similar petrographic and geochemical characteristics but differences in (1) sorting of two types of spherules and (2) occurrence of primary minerals (Ni‐Cr spinel and zircon). We favor a single impact scenario followed by postimpact reworking, and subsequent alteration. The spherule layers are Al₂O₃‐rich and can be distinguished from the Al₂O₃‐poor marine sediments by distinct Al‐OH absorption features in the short wave infrared (SWIR) region of the electromagnetic spectrum. Infrared images can cover tens to hundreds of square meters of lithologies and, thus, may be used to search for Al‐OH‐rich spherule layers in Al₂O₃‐poor sediments, such as Eoarchean metasediments, where the textural characteristics of the spherule layers are obscured by metamorphism.     

Automatic Building Extraction from Image and LiDAR Data with Active Contour Segmentation

Automatic building extraction is an important topic for many applications such as urban planning, disaster management, 3D building modeling and updating GIS databases. Its approaches mainly depend on two data sources: light detection and ranging (LiDAR) point cloud and aerial imagery both of which have advantages and disadvantages of their own. In this study, in order to benefit from the advantages of each data sources, LiDAR and image data combined together. And then, the building boundaries were extracted with the automated active contour algorithm implemented in MATLAB. Active contour algorithm uses initial contour positions to segment an object in the image. Initial contour positions were detected without user interaction by a series of image enhancements, band ratio and morphological operations. Four test areas with varying building and background levels of detail were selected from ISPRS’s benchmark Vaihingen and Istanbul datasets. Vegetation and shadows were removed from all the datasets by band ratio to improve segmentation quality. Subsequently, LiDAR point cloud data was converted to raster format and added to the aerial imagery as an extra band. Resulting merged image and initial contour positions were given to the active contour algorithm to extract building boundaries. In order to compare the contribution of LiDAR to the proposed method, the boundaries of the buildings were extracted from the input image before and after adding LiDAR data to the image as a layer. Finally extracted building boundaries were smoothed by the Awrangjeb (Int J Remote Sen 37(3): 551–579.  https://doi.org/10.1080/01431161.2015.1131868, 2016) boundary regularization algorithm. Correctness (Corr), completeness (Comp) and accuracy (Q) metrics were used to assess accuracy of segmented building boundaries by comparing extracted building boundaries with manually digitized building boundaries. Proposed approach shows the promising results with over 93% correctness, 92% completeness and 89% quality.     

Analysis and catalogue of sneaker waves in the US Pacific Northwest between 2005 and 2017

Sneaker waves are responsible for many casualties and beach rescues in the Pacific Northwest (PNW) region of the USA. In this paper, a catalogue of these events from 2005 to mid-2017 in Oregon and Northern California is presented. The events are grouped depending on the local characteristics into those involving structures, semi-enclosed beaches, and open-coast beaches. It was found that sneaker waves occurred between the months of October and April, which is also the time of the year of most storm activity in the PNW. The majority of the events are associated with long-period swell approaching the coast. Beach slope and significant wave height were not found to correlate with sneaker wave incidents. However, total water level analysis reveals that the run-up level was expected to reach the beachgoers for the majority of the investigated cases indicating that a forecasting system to warn beachgoers is possible.