Batch and Column Experiments to Support Heavy Metals (Cu,Zn, and Mn) Transport Modeling in Alluvial Sediments Between the Mogan Lake and the Eymir Lake,Gölbaşı, Ankara

This article describes laboratory batch sorption and column transport experiments that were conducted using heterogeneous alluvial sediments with a wide physical characteristic from wells, located between Lake Mogan and Lake Eymir, Gölbaşı, Ankara. The batch sorption experiment was conducted in two separate systems, that is, single and multicomponents. Single batch experiment was performed to determine equilibrium condition between the heavy metal ions and the soil adsorption sites. The sorption isotherms data from multibatch experiments were used to calculate the sorption parameters. Single batch experiment indicated that equilibrium was attained within 9 days from the start of the sorption test. As a result of multicomponents batch experiments, for Zn and Mn, the sorption process was well described by the Freundlich or Langmuir isotherm model, whereas sorption of Cu was better described by the linear isotherm model. The K_d of Cu were found to be highest in soil 1 (32550.350 L kg⁻¹) and lowest in soil 5 (18170.76 L kg⁻¹). The maximum and minimum sorption capacity values for Zn were found to be in soil 1 (10985.148 mg kg⁻¹) and in soil 2 (8597.14 mg kg⁻¹) units, respectively. [Correction added after online publication 15 July, 2010: In the preceding sentence, the words “minimum” and “maximum” were initially switched.] Similarly, soil 1 (7587.391 mg kg⁻¹) and soil 5 (4908.695 mg kg⁻¹) units provided the maximum and minimum values for Mn. In the column experiments, flow and tracer transport was studied under saturated conditions using conservative tracer to determine the transport parameters. Transport parameter values were obtained by curve-fitting using the nonlinear least-squares optimization code CXTFIT. Results of the column experiments indicated that the dispersivity values obtained for soil samples were in the range of 0.024 to 1.13 cm.     

The effects of elevation on thermal bioclimatic conditions in Uludağ (Turkey)

This study compares the thermal bioclimatic conditions recorded at Bursa (100 m) and Uluda? (1878 m) meteorological stations at 7:00, 14:00 and 21:00 LST (local standard time) between 1975 and 2006, by using the physiologically equivalent temperature (PET), which is calculated from meteorological parameters. The effects of elevation-dependent environmental and atmospheric conditions on thermal perception (i.e., PET) values were analyzed and assessed. The analysis showed that the mean annual difference between PET values in Bursa and Uluda? was 12 ºC. The difference was lower in winter (9 ºC PET) and higher in summer (15 ºC PET). The highest difference between PET values occurred in the afternoon (16 ºC PET) and the lowest difference occurred in the morning (8.4 ºC PET). The differences occur as a result of high altitude and higher surface albedo due to snowfall, which leads to lower PET values and thus to less comfortable thermal conditions. The mean PET values of Bursa and Uluda? decrease 0.67 ºC every 100 m.     

Geomechanical Evaluation of Derinkuyu Antique Underground City and its Implications in Geoengineering

Derinkuyu Underground City, located in the Cappadocia Region of Turkey, is an important structure not only for its antique and archaeological characteristics, but also as a structure in terms of the long-term stability of underground rock structures excavated by mankind. The authors carried out some observational, experimental and theoretical rock mechanics studies in the region from 1996 in the context of a research project supported by the Ministry of Education, Culture, Sports, Science and Technology of Japan for the assessment of the long-term behaviour of Derinkuyu Underground City, and these studies are still continuing. In addition to the monitoring of the environmental conditions such as temperature, moisture and air pressure, they also installed acoustic emission (AE) and electrical potential (EP) measurement systems to monitor the behaviour and response of the surrounding rock at the fifth and seventh floors of the underground city. In this article, the geology, seismicity and state of stress of the Cappadocia Region, climatic conditions in the underground city and its vicinity, short- and long-term behaviours of the surrounding rock, its index and mechanical properties, and effects of water content and freezing–thawing processes were investigated. The stability of Derinkuyu Underground City was also evaluated using theoretical and numerical methods, and the results were presented. Furthermore, its implications in modern geoengineering are also discussed.     

Investigation of dynamic response of masonry minaret structures

Almost all historical minarets in Turkey were constructed using cut stone, masonry blocks or combination of these two materials. The structural and geometrical properties of each masonry minaret, or slender tower structure, depend on many factors including the structural knowledge and applications at the time of construction, experience of the architect or engineer, seismicity of the region, and availability of construction materials in that area. Recent earthquakes in Turkey have shown that most masonry minarets in high seismic regions are vulnerable to structural damage and collapse. In this study, in order to investigate the dynamic behavior of historical unreinforced masonry minarets, three representative minarets with 20, 25, and 30 m height were modeled and analyzed using two ground motions recorded during the 1999 Kocaeli and Duzce, Turkey earthquakes. The modal analyses of the models have shown that the structural periods and the overall structural response are influenced by the minaret height and spectral characteristics of the input motion. The dynamic displacement and axial stress time histories are computed at the critical points on the minarets. During recent earthquakes, most minaret failures occurred above the base of the structure. Consistent with the observed response, the largest stresses were calculated at the same location.     

Wavelet regression model as an alternative to neural networks for monthly streamflow forecasting

The accuracy of the wavelet regression (WR) model in monthly streamflow forecasting is investigated in the study. The WR model is improved combining the two methods—the discrete wavelet transform (DWT) model and the linear regression (LR) model—for 1‐month‐ahead streamflow forecasting. In the first part of the study, the results of the WR model are compared with those of the single LR model. Monthly flow data from two stations, Gerdelli Station on Canakdere River and Isakoy Station on Goksudere River, in Eastern Black Sea region of Turkey are used in the study. The comparison results reveal that the WR model could increase the forecast accuracy of the LR model. In the second part of the study, the accuracy of the WR model is compared with those of the artificial neural networks (ANN) and auto‐regressive (AR) models. On the basis of the results, the WR is found to be better than the ANN and AR models in monthly streamflow forecasting. Copyright © 2009 John Wiley & Sons, Ltd.     

Examination of the structural characteristics arising in gypsums by the GPR and MASW methods (Sivas,Turkey)

This study was performed at an area of 50?×?48 m² being defined as a new settlement in the northeast of Sivas. In the study, the discontinuities that are not deep and their geophysical characteristics were examined by the GPR and MASW methods. For interpretation, GPR cross sections were prepared as 2D–3D, and MASW cross sections were prepared as 2D. As for geophysical cross sections, about 10 m depth was examined. It was understood that the reflections observed in the form of hyperbolas in GPR cross sections correspond to areas having low S wave velocity (V_s) in MASW cross sections. It was understood that the S wave velocities are lower than 653 m/s, that the seismic velocities in between 653 and 275 m/s indicate partially deteriorated areas and that the S wave velocities of unweathered gypsums are higher than 1275 m/s at these low-velocity zones. Thus, it was thought that the fill material that may arise in the fracture, crack and deterioration areas arises from intercalation and clastic gypsum units, and that it plays a role in having low value S wave velocities. In all the geophysical cross sections, it was understood that the structures with gypsum are intense at the initial 5 m. And a fracture at the south of the study area, that it was estimated might be longer than 40 m, was determined as the largest gypsum structure. It was understood that this fracture starts from a depth of about 5 m in the west and that it slopes down to 7 m depth in the east. According to these results, it was understood that the damage amount arising in time in the gypsum structures from the effect of water may increase, the study area was defined as risky, and the required importance should be attached to these structures especially in foundation engineering.     

Soil gas radon concentrations along the Ganos Fault (GF)

In this study, soil radon levels have been measured for the first time across the Ganos fault (GF), which is known as the western part of the North Anatolian Fault Zone. LR 115 Type 2 Solid State Nuclear Track Detectors (time integrated) have been applied to determine soil gas radon levels, and the survey was performed in 16 stations along the fault line. The results showed that soil gas radon concentrations and variation of concentration levels are comparable high along the fault line. It is also observed that in the middle of the Ganos Fault, fairly elevated radon levels were detected. These can be related to the activity of the fault lines. It is confirmed that the study area has a very active tectonic structure and is great location for analyzing radon variations.     

Monitoring of fault healing after the 1999 Kocaeli, Turkey, earthquake

The North Anatolian fault zone that ruptured during the mainshock of theM 7.4 Kocaeli (Izmit) earthquake of 17 August 1999 has beenmonitored using S wave splitting, in order to test a hypothesisproposed by Tadokoro et al. (1999). This idea is based on the observationof the M 7.2 1995 Hyogo-ken Nanbu (Kobe) earthquake, Japan.After the Hyogo-ken Nanbu earthquake, a temporal change was detectedin the direction of faster shear wave polarization in 2–3 years after the mainshock (Tadokoro, 1999). Four seismic stations were installed within andnear the fault zone at Kizanlik where the fault offset was 1.5 m, about80 km to the east of the epicenter of the Kocaeli earthquake. Theobservation period was from August 30 to October 27, 1999. Preliminaryresult shows that the average directions of faster shear wave polarization attwo stations were roughly parallel to the fault strike. We expect that thedirection of faster shear wave polarization will change to the same directionas the regional tectonic stress reflecting fault healing process. We havealready carried out a repeated aftershock observation at the same site in2000 for monitoring the fault healing process.