Land Cover Mapping for Namdapha National Park (Arunachal Pradesh), India Using Harmonized Land Cover Legends

Since last few decades RS-GIS is playing vital role in studying and mapping spatiotemporal responses of land cover, however, as a matter of fact, the mapping outputs largely depend on the expert's/user's preferences because location specific and people specific land cover classification systems are adopted autonomously for image classification in GIS. This may actually lead to an ambiguous definition of a particular land cover type when such different maps are compared at global level. In 1993, FAO and UNEP started efforts for development of a software tool know as LCCS which is a comprehensive standardized tool capable of providing land cover characterization to all possible land cover types in the world regardless of spatial relevance, mapping scale, data collection method etc. Adding to the global efforts of land cover legend harmonization and mapping, this study presents development of harmonized land cover legends for Namdapha National Park located in north-eastern Indian Himalayan region using LCCS and subsequent mapping. The potential of Remote Sensing (RS) and Geographical Information Systems (GIS) in forest/land cover mapping is very well recognized. Therefore, adopting the developed harmonized legends for the study area, land cover mapping was done using RS-GIS approach.     

Multifrequency algorithms for precise point positioning: MAP3

We present the new MAP3 algorithms to perform static precise point positioning (PPP) from multifrequency and multisystem GNSS observations. MAP3 represents a two-step strategy in which the least squares theory is applied twice to estimate smoothed pseudo-distances, initial phase ambiguities, and slant ionospheric delay first, and the absolute receiver position and its clock offset in a second adjustment. Unlike the classic PPP technique, in our new approach, the ionospheric-free linear combination is not used. The combination of signals from different satellite systems is accomplished by taking into account the receiver inter-system bias. MAP3 has been implemented in MATLAB and integrated within a complete PPP software developed on site and named PCube. We test the MAP3 performance numerically and contrast it with other external PPP programs. In general, MAP3 positioning accuracy with low-noise GPS dual-frequency observations is about 2.5 cm in 2-h observation periods, 1 cm in 10 h, and 7 mm after 1 day. This means an improvement in the accuracy in short observation periods of at least 7 mm with respect to the other PPP programs. The MAP3 convergence time is also analyzed and some results obtained from real triple-frequency GPS and GIOVE observations are presented.     

Non-linear motions of Australian geodetic stations induced by non-tidal ocean loading and the passage of tropical cyclones

We investigate daily and sub-daily non-tidal oceanic and atmospheric loading (NTOAL) in the Australian region and put an upper bound on potential site motion examining the effects of tropical cyclone Yasi that crossed the Australian coast in January/February 2011. The dynamic nature of the ocean is important, particularly for northern Australia where the long-term scatter due to daily and sub-daily oceanic changes increases by 20–55 % compared to that estimated using the inverted barometer (IB) assumption. Correcting the daily Global Positioning System (GPS) time series for NTOAL employing either a dynamic ocean model or the IB assumption leads to a reduction of up to 52 % in the weighted scatter of daily coordinate estimates. Differences between the approaches are obscured by seasonal variations in the GPS precision along the northern coast. Two compensating signals during the cyclone require modelling at high spatial and temporal resolution: uplift induced by the atmospheric depression, and subsidence induced by storm surge. The latter dominates ( \(>\) 135 %) the combined net effect that reaches a maximum of 14 mm, and 10 mm near the closest GPS site TOW2. Here, 96 % of the displacement is reached within 15 h due to the rapid transit of cyclones and the quasi-linear nature of the coastline. Consequently, estimating sub-daily NTOAL is necessary to properly account for such a signal that can be 3.5 times larger than its daily-averaged value. We were unable to detect the deformation signal in 2-hourly GPS processing and show that seasonal noise in the Austral summer dominates and precludes GPS detection of the cyclone-related subsidence.     

Prediction of Land Cover Change Using Markov and Cellular Automata Models: Case of Al-Ain,UAE, 1992-2030

The UAE has witnessed rapid urban development and economic growth in recent years. With its ambitious vision to become one of the advanced nations by 2021, planners and policy-makers need to know the most likely direction of future urban development. In this study, remotely sensed imagery coupled with cellular automata models were used to predict land cover in Al Ain, the second largest city in the Emirate of Abu Dhabi. Markov and cellular automata models were used for 1992 and 2006 to predict land cover in 2012. Land Use and Land Cover maps for the study area were derived from 1992, 2006, and 2012 Landsat satellite images (TM, ETM⁺). The models achieved an overall accuracy of approximately 80 %. A Markov model was applied for 2006 and 2012 to predict land cover in 2030. The results conformed to the general trend of the Al Ain Master Plan 2030. This study demonstrates that remote sensing, with the availability of free Landsat data, is a viable technology that could be used to help in the prediction process especially in developing countries, where data availability is a problem.     

Generation of Vegetation Fraction and Surface Albedo Products Over India from Ocean Colour Monitor (OCM) Data Onboard Oceansat-2

The use of Local Area Coverage (LAC) data from Ocean Color Monitor (OCM) sensor of Oceansat-2 with its high radiometric resolution (12 bits/pixel) and 2-day repeat cycle for rapid monitoring of vegetation growth and estimating surface albedo for the Indian region is demonstrated in this study. For the vegetation monitoring, normalized difference vegetation index (NDVI) and vegetation fraction (VF) products were estimated by maximum value composite approach fortnightly and were resampled to 1 km. The surface albedo products were realized by converting narrow-band eight-band spectral reflectance OCM data to a) visible (300–700 nm) and b) broad band (300–3,000 nm) data. For validation, the derived products were compared with respective MODIS global products and found to be in good agreement.     

Monitoring of salt affected soils — A case study using aerial photographs,salyut‐7 space photographs,and landsat TM data

Soils of part of Ukai‐kakarapar Command area, Gujarat (India) have been mapped at 1:25, 000 scale using aerial photographs of December 1977. It was observed that about 36.3% of the area was affected by soil salinity/alkalinity. The test area has been remapped using Salyut‐7 space photographs taken during Indo‐Soviet joint flight in April, 1984. The area affected by soil salinity/alkalinity was found to be substantially higher (80.3%). The earlier mapping using aerial photographs was done when the soil surface was compartively moist (December 1977) as compared to date of Salyut‐7 photography (April 1984), when the soil surface was likely to be devoid of moisture and the salts moved to the surface. To have easy comparision with the map prepared by using aerial photographs, Landsat TM data of December, 1985 was used in which 45.7% of the total area was mapped as salt affected. The extent of area delineated using Landsat TM was higher than that of 1977 but much lesser than the area delineated using Salyut‐7 (MKF‐6M) photographs. This indicated that the increase in the extent of salt affected area in the map prepared using the MKF‐6M photographs might be partly due to actual increase in the salinity/alkalinity and partly due to the seasonal affects. Among the various bands of MKF‐6M, band ‐4 was found to be the best for delineating the salt affected soils. The boundaries were sharper in the FCC and band No.4 of MKF‐6M than in the aerial photographs.     

Mapping burns and natural reforestation using thematic Mapper data

Remote sensing techniques are specially suitable to detect and to map areas affected by forest fires. In this work, Landsat 5 Thematic Mapper (TM) data has been used to study a number of forest fires that occurred in the province of Valencia (Spain) and to monitor the vegetation regeneration over burnt areas.

A reference area (non‐burnt forest) was established to assess the change produced by fire. The radiance in the thermal band (10.4–12.5 μm) and the normalized difference in reflectance between near 1R (0.76–0.90 μm) and middle IR (2.08–2.35 μm) were the most suitable parameters to map burnt areas. This index can also be used for monitoring vegetation regeneration in burnt areas. About a month after the fire, the burns show temperatures of 5–6 °C higher than those found in the reference area, and the vegetation index shows negative values whereas the reference area values remain positive. The differences between the burns and the reference area for the vegetation index decrease with time as vegetation regenerates.     

Earth observations during space shuttle flight STS‐41: Discovery's mission to planet earth

Abstract

Multi‐temporal ERS‐1 SAR data acquired over a large agricultural region in West Bengal was used to classify kharif crops like rice, jute and sugarcane. Rice crop grown under lowland management practice showed a temporal characteristic. The dynamic range of backscatter was highest for this crop in temporal SAR data. This was used to classify rice using temporal SAR data. Such temporal character was not observed for the other study crops, which may be due to the difference in cultivation practice and crop calendar. Significant increase in backscatter from the ploughed fields was used to derive information on onset and duration of land preparations. Synergistic use of optical remote sensing data and SAR data increased the separability of rice crop from homesteads and permanent vegetation classes.     

Noaa's avhrr archive

The Satellite Data Services Division (SDSD) maintains a digital browse file of Advanced Very High Resolution Radiometer (AVHRR) data. The AVHRR instrument is aboard the TIROS‐N series of spacecraft. The instrument has five channels for viewing the earth, two channels are in the visible part of the spectrum and three are in the infrared portion of the spectrum. Selected data from this instrument are converted to digital browse files and loaded on the Image Library and Browse System (1LABS). The ILABS allows SDSD personnel to review data before the digital tapes are sent to satisfy the user's order. It also allows hardcopy images be sent to users. Working in conjunction with the ILABS is the Electronic Catalog System (ECS). The ECS is able to be directly accessed by the user community and it allows the users to find data in their areas of interest. Once the data are found, then that data can be ordered from the SDSD.     

AEROSPACE METHODS AND DATA FOR THE STUDY OF EXOGENIC PROCESSES IN THE MOUNTAIN REGIONS OF THE BAIKAL-AMUR MAINLINE

Basic exogenic dynamic processes are analysed and discussed. Such processes are actively developed and intensively utilized in mountainous regions of the Baikal-Amur Mainline. Investigation of these regions, which call for reliance on aerospace methods is of considerable economic significance. Translated from: Kosmicheskiye Issledovaniya Prirodnykh Kompleksov Sibiri i Dal'nego Vostoka, Novosibirik, 1983, pp. 57-63.