Regional modelling of rainfall-induced runoff using hydrological model by incorporating plant cover effects: case study in Kelantan,Malaysia

The objective of this paper is to develop a spatial temporal runoff modelling of local rainfall patterns effect on the plant cover hilly lands in Kelantan River Basin. Rainfall interception loss based on leaf area index, loss/infiltration on the ground surface, and runoff calculation were considered as the main plant cover effects on the runoff volume. In this regard, a hydrological and geotechnical grid-based regional model (integrated model) was performed using Microsoft Excel^® and GIS framework system for deterministic modelling of rainfall-induced runoff by incorporating plant cover effects. The infiltration process of the current model was integrated with the precipitation distribution method and rainfall interception approach while the runoff analysis of integrated model was employed based on loss/infiltration water on the ground surface with consideration of water interception loss by canopy and the remaining surface water. In the following, the spatial temporal analysis of rainfall-induced runoff was performed using 10 days of hourly rainfall events at the end of December 2014 in Kelantan River Basin. The corresponding changes in pressure head and consequent rate of infiltration were calculated during rainfall events. Subsequently, flood volume is computed using local rainfall patterns, along with water interception loss and the remaining surface water in the study area. The results showed the land cover changes caused significant differences in hydrological response to surface water. The increase in runoff volume of the Kelantan River Basin is as a function of deforestation and urbanization, especially converting the forest area to agricultural land (i.e. rubber and mixed agriculture).     

Mapping cropland fallow areas in myanmar to scale up sustainable intensification of pulse crops in the farming system

Cropland fallows are the next best-bet for intensification and extensification, leading to increased food production and adding to the nutritional basket. The agronomical suitability of these lands can decide the extent of usage of these lands. Myanmar’s agricultural land (over 13.8 Mha) has the potential to expand by another 50% into additional fallow areas. These areas may be used to grow short-duration pulses, which are economically important and nutritionally rich, and constitute the diets of millions of people as well as provide an important source of livestock feed throughout Asia. Intensifying rice fallows will not only improve the productivity of the land but also increase the income of the smallholder farmers. The enhanced cultivation of pulses will help improve nutritional security in Myanmar and also help conserve natural resources and reduce environmental degradation. The objectives of this study was to use remote sensing methods to identify croplands in Myanmar and cropland fallow areas in two important agro-ecological regions, delta and coastal region and the dry zone. The study used moderate-resolution imaging spectroradiometer (MODIS) 250-m, 16-day normalized difference vegetation index (NDVI) maximum value composite (MVC), and land surface water index (LSWI) for one 1 year (1 June 2012–31 May 2013) along with seasonal field-plot level information and spectral matching techniques to derive croplands versus cropland fallows for each of the three seasons: the monsoon period between June and October; winter period between November and February; and summer period between March and May. The study showed that Myanmar had total net cropland area (TNCA) of 13.8 Mha. Cropland fallows during the monsoon season account for a meagre 2.4% of TNCA. However, in the winter season, 56.5% of TNCA (or 7.8 Mha) were classified as cropland fallows and during the summer season, 82.7% of TNCA (11.4 Mha) were cropland fallows. The producer’s accuracy of the cropland fallow class varied between 92 and 98% (errors of omission of 2 to 8%) and user’s accuracy varied between 82 and 92% (errors of commission of 8 to 18%) for winter and summer, respectively. Overall, the study estimated 19.2 Mha cropland fallows from the two major seasons (winter and summer). Out of this, 10.08 Mha has sufficient moisture (either from rainfall or stored soil water content) to grow short-season pulse crops. This potential with an estimated income of US$ 300 per hectare, if exploited sustainably, is estimated to bring an additional net income of about US$ 1.5 billion to Myanmar per year if at least half (5.04 Mha) of the total cropland fallows (10.08 Mha) is covered with short season pulses.     

Unveiling buried aeolian landscapes: reconstructing a late Holocene dune environment using 3D ground-penetrating radar

Across the UK, sandy beaches and dunes protect coastal infrastructure from waves and extreme water levels during large-scale storms, while providing important habitats and recreational opportunities. Understanding their long-term evolution is vital in managing their condition in a changing climate. Recently, ground-penetrating radar (GPR) methods have grown in popularity in geomorphological applications, yielding centimetre-scale resolution images of near-surface stratigraphy and structure, thus allowing landscape evolution to be reconstructed. Additionally, abrupt changes in palaeo-environments can be visualized in three dimensions. Although often complemented by core data, GPR allows interpretations to be extended into areas with minimal ground-truth control. Nonetheless, GPR data interpretation can be non-intuitive and ambiguous, and radargrams may not initially resemble the expected subsurface geometry. Interpretation can be made yet more onerous when handling the large 3D data volumes that are facilitated with modern GPR technology. Here we describe the development of novel semi-automated GPR feature-extraction tools, based on ‘edge detection’ and ‘thresholding’ methods, which detect regions of increased GPR reflectivity which can be applied to aid in the reconstruction of a range Quaternary landscapes. Since reflectivity can be related to lithological and/or pore fluid changes, the 3D architecture of the palaeo-landscape can be reconstructed from the features extracted from a geophysical dataset. We present 500 MHz GPR data collected over a buried Holocene coastal dune system in North Wales, UK, now reclaimed for use as an airfield. Core data from the site, reaching a maximum depth 2 m, suggest rapid vertical changes from sand to silty-organic units, and GPR profiles suggest similar lateral complexity. By applying thresholding methods to GPR depth slices, these lateral complexities are effectively and automatically mapped. Furthermore, automatic extraction of the local reflection power yields a strong correlation with the depth variation of organic content, suggesting it is a cause of reflectivity contrast. GPR-interpolated analyses away from core control thus offer a powerful proxy for parameters derived from invasive core logging. The GPR data collected at Llanbedr airfield highlight a complex dune system to a depth of 2.8 m, probably deposited in several phases over ~700 years, similar to elsewhere in North Wales.     

The 2020 glacial lake outburst flood process chain at Lake Salkantaycocha (Cordillera Vilcabamba,Peru)

Glacial lakes represent a threat for the populations of the Andes and numerous disastrous glacial lake outburst floods (GLOFs) occurred as a result of sudden dam failures or dam overtoppings triggered by landslides such as rock/ice avalanches into the lake. This paper investigates a landslide-triggered GLOF process chain that occurred on February 23, 2020, in the Cordillera Vilcabamba in the Peruvian Andes. An initial slide at the SW slope of Nevado Salkantay evolved into a rock/ice avalanche. The frontal part of this avalanche impacted the moraine-dammed Lake Salkantaycocha, triggering a displacement wave which overtopped and surficially eroded the dam. Dam overtopping resulted in a far-reaching GLOF causing fatalities and people missing in the valley downstream. We analyze the situations before and after the event as well as the dynamics of the upper portion of the GLOF process chain, based on field investigations, remotely sensed data, meteorological data and a computer simulation with a two-phase flow model. Comparison of pre- and post-event field photographs helped us to estimate the initial landslide volume of 1–2 million m³. Meteorological data suggest rainfall and/or melting/thawing processes as possible causes of the landslide. The simulation reveals that the landslide into the lake created a displacement wave of 27 m height. The GLOF peak discharge at the dam reached almost 10,000 m³/s. However, due to the high freeboard, less than 10% of the lake volume drained, and the lake level increased by 10–15 m, since the volume of landslide material deposited in the lake (roughly 1.3 million m³) was much larger than the volume of released water (57,000 m³, according to the simulation). The model results show a good fit with the observations, including the travel time to the uppermost village. The findings of this study serve as a contribution to the understanding of landslide-triggered GLOFs in changing high-mountain regions.

     

Influence of a permeable sand layer on the mechanism of backward erosion piping using 3D pipe depth measurements

Backward erosion piping (BEP) poses a threat to the stability of water-retaining structures. This can lead to severe erosion and collapse of embankments. A novel economically appealing measure against BEP is the coarse sand barrier (CSB). The CSB is a trench filled with coarse sand that is placed below the blanket layer on the landward side of the embankment, which prevents the pipe from developing upstream when it encounters the CSB. Inclusion of a CSB creates a vertically layered sand, which is the situation that can also exist in practice but is different from traditional BEP tests with one homogeneous sand. This paper presents new observations and measurements in medium-scale laboratory tests. 3D measurements of the pipe depth and dimensions are presented and analysed. This analysis indicates how the pipe dimensions evolve during the piping process and shows the erosion mechanism for BEP in vertically layered sands. The findings demonstrate the significance of three-dimensional study of the pipe rather than two dimensions. The pipe depth, width and depth-to-width ratios at the pipe tip in critical erosion stages are measured and presented. In the presented tests, two different erosion behaviours (stepwise pipe progression until failure and straight failure) are found and analysed with respect to possible influential parameters. Higher head drops and flow rates are found in tests with straight failure at the stage before progression. A linear relationship between the hydraulic conductivity contrast (k_c) and the critical head drops (h_c) is found and observations are used to investigate deviations from the line.

     

Can a dam type of an alpine lake be derived from lake geometry?A negative result

Glacial lake outburst floods(GLOFs)represent one of the most serious hazard and risk in deglaciating high mountain regions worldwide and the need for GLOF hazard and risk assessment is apparent.As a consequence,numerous region-and nation-wide GLOF assessment studies have been published recently.These studies cover large areas and consider hundreds to thousands of lakes,prioritizing the hazard posed by them.Clearly,certain simplification is required for executing such studies,often resulting in neglecting qualitative characteristics which would need manual assignment.Different lake dam types(e.g.,bedrock-dammed,moraine-dammed)are often not distinguished,despite they control GLOF mechanism(dam overtopping/dam breach)and thus GLOF magnitude.In this study,we explore the potential of easily measurable quantitative characteristics and four ratios to approximate the lake dam type.Our dataset of 851 lakes of the Cordillera Blanca suggests that while variances and means of these characteristics of individual lake types differ significantly(F-test,t-test),value distribution of different geometrical properties can’t be used for the originally proposed purpose along the spectra.The only promising results are obtained for extreme values(selected bins)of the ratios.For instance,the low width to length ratio indicates likely morainedammed lake while the high value of ratio indicating round-shape of the lake indicates increased likelihood of bedrock-dammed lake.Overall,we report a negative result of our experiment since there are negligible differences of relative frequencies in most of the bins along the spectra.     

Morphological and molecular evidence supports the first occurrence of two fishes,Siganus sutor(Valenciennes, 1835)and Seriolina nigrofasciata(Rüppell, 1829)(Actinopterygii:Perciformes), from marine waters of Odisha coast,Bay of Bengal,India

Marine ecosystems provide a wide variety of diverse habitats that frequently promote migration and ecological adaptation. The extent to which the geographic distribution of marine organism has reshaped by human activities remains underappreciated. The limitations intrinsic to morphology-based identification systems have engendered an urgent need for reliable genetic methods that enable the unequivocal recognition of fish species,particularly those that are prone to overexploitation and/or market substitution. In the present study, however, an attempt has been taken to identify two locally adapted fish species, Siganus sutor(Valenciennes, 1835) and Seriolina nigrofasciata(Rüppell, 1829) of order Perciformes, which happens to be the first record in Odisha coast,Bay of Bengal. The diagnostic characteristics of Siganus sutor are: dorsal fin XIII-10, anal fin VII-9, pectoral fin 15,pelvic fin II-3, while that of Seriolina nigrofasciata dorsal fin VI-I-35, anal fin I-17, pectoral fin 16, pelvic fin 5. All COI barcodes generated in this study were matched with reference sequences of expected species, according to morphological identification. Bayesian and likelihood phylogenetic trees were drawn based on DNA barcodes and all the specimens clustered in agreement with their taxonomic classification at the species level. The phylogeographic studies based on haplotype network and migration rates suggest that both the species were not panmitic and the high-frequency population distribution indicates successful migration. The result of this study provides an important validation of the use of DNA barcode sequences for monitoring species diversity and changes within a complex marine ecosystem.     

The brecciated texture of polymict eucrites: Petrographic investigations of unequilibrated meteorites from the Antarctic Yamato collection

We report on the petrography and mineralogy of five Yamato polymict eucrites to better constrain the formation and alteration of crustal material on differentiated asteroids. Each sample consists of different lithic clasts that altogether form four dominant textures and therefore appear to originate from closely related petrological areas within Vesta′s crust. The textures range from subophitic to brecciated, porphyritic, and quench‐textured, that differ from section to section. Comparison with literature data for these samples is therefore difficult, which stresses that polymict eucrites are extremely complex in their petrography and investigation of only one thick section may not be representative for the host rock. We also show that sample Y‐793548 consists of more than one lithic unit and must therefore be classified as polymict instead of monomict. The variety and nature of lithic textures in the investigated Yamato meteorites indicate shock events, intense post‐magmatic thermal annealing, and secondary alteration. These postmagmatic features occur in different intensities, varying from clast to clast or among coexisting mineral fragments on a small, local scale. Several clasts within the eucrites studied have been modified by late‐stage alteration processes that caused deposition of Fe‐rich olivine and Fe enrichment along cracks crosscutting pyroxene crystals. However, formation of these secondary phases seems to be independent of the degree of thermal metamorphism observed within every type of clast, which would support a late‐stage metasomatism model for their formation.     

Palaeo-environmental and dietary analysis of intestinal contents of a mammoth calf (Yamal Peninsula,northwest Siberia)

Intestinal samples from the one-month-old Siberian mammoth calf ‘Lyuba’ were studied using light microscopy and ancient DNA to reconstruct its palaeo-environment and diet. The palynological record indicates a ‘mammoth steppe’. At least some pollen of arboreal taxa was reworked, and thus the presence of trees on the landscape is uncertain. In addition to visual comparison of 11 microfossil spectra, a PCA analysis contributed to diet reconstruction. This yielded two clusters: one of samples from the small intestine and the other of large-intestine samples, indicating compositional differences in food remains along the intestinal tract, possibly reflecting different episodes of ingestion. Based on observed morphological damage we conclude that the cyperaceous plant remains and some remains of dwarf willows were originally eaten by a mature mammoth, most likely Lyuba’s mother. The mammoth calf probably unintentionally swallowed well-preserved mosses and mineral particles while eating fecal material deposited on a soil surface covered with mosses. Coprophagy may have been a common habit for mammoths, and we therefore propose that fecal material should not be used to infer season of death of mammoths. DNA sequences of trnL and rbcL genes amplified from ancient DNA extracted from intestinal samples confirmed and supplemented plant identifications based on microfossils and macro-remains. Results from different extraction methods and barcoding markers complemented each other and show the value of longer protocols in addition to fast and commercially available extraction kits.