Viscous damping of nonlinear magneto-acoustic waves

The motivation for the present work is discussed, and in Section 2 the nonlinear Burger's equation is derived for wave propagation in a compressible unstratified viscous fluid permeated by a magnetic field (initially constant), using the reductive perturbation method of Taniuti and Wei (1968). An analytic solution of the equation is given (after Sakai, 1972) and the angular behaviour is shown for certain parameters describing the nonlinearity and damping of the system, for both fast- and slow-mode disturbances.     

Coral Recruitment and Regeneration on a Maldivian Reef 21 Months after the Coral Bleaching Event of 1998

Abstract. This paper describes the quantitative inventory of stony corals on a Maldivian reef after the bleaching event of 1998. The detailed data, collected in March 1999 and March 2000, comprise survival, new recruitment and regenerates. They were obtained in 6 transects laid out randomly on the reef flat, on 22 Acropora tables on 6 sites at the reef edge and on 39 Porites lobata blocks and 1 Diploastrea heliopora colony. The present cover of living zooxanthellate corals is reduced to ca. 2 – 5 % of its previous state. Acroporidae and Pocilloporidae were practically wiped out, while Poritidae survived partly and Agariciidae (esp. Pavona) are now the dominant group. New settlements on dead Acropora tables were mainly Agariciidae, followed by Acroporidae and Pocilloporidae. Regenerates on Porites were pronounced and the apparent yearly increase in mass was about threefold that of Diploastrea, which is 3 – 4 mm per year. The influence on reef ecology in terms of coral substrate and species, possible sources of larvae, change of guilds in reef builders, other species and the prospect for further development of the reef, with respect to growth versus erosion, is discussed.     

Implementation of Solute Transport in the Vadose Zone into the “HYDRUS Package for MODFLOW”

The “HYDRUS package for MODFLOW” is an existing MODFLOW package that allows MODFLOW to simultaneously evaluate transient water flow in both unsaturated and saturated zones. The package is based on incorporating parts of the HYDRUS-1D model (to simulate unsaturated water flow in the vadose zone) into MODFLOW (to simulate saturated groundwater flow). The coupled model is effective in addressing spatially variable saturated-unsaturated hydrological processes at the regional scale. However, one of the major limitations of this coupled model is that it does not have the capability to simulate solute transport along with water flow and therefore, the model cannot be employed for evaluating groundwater contamination. In this work, a modified unsaturated flow and transport package (modified HYDRUS package for MODFLOW and MT3DMS) has been developed and linked to the three-dimensional (3D) groundwater flow model MODFLOW and the 3D groundwater solute transport model MT3DMS. The new package can simulate, in addition to water flow in the vadose zone, also solute transport involving many biogeochemical processes and reactions, including first-order degradation, volatilization, linear or nonlinear sorption, one-site kinetic sorption, two-site sorption, and two-kinetic sites sorption. Due to complex interactions at the groundwater table, certain modifications of the pressure head (compared to the original coupling) and solute concentration profiles were incorporated into the modified HYDRUS package. The performance of the newly developed model is evaluated using HYDRUS (2D/3D), and the results indicate that the new model is effective in simulating the movement of water and contaminants in the saturated-unsaturated flow domains.     

Jet Deflection by a Quasi-Steady-State Side Wind in the Laboratory

We present experimental data on the steady state deflection of a highly supersonic jet by a side-wind in the laboratory. The use of a long interaction region enables internal shocks to fully cross the jet, leading to the development of significantly more structure in the jet than in previous work with a similar setup (Lebedev et al., 2004). The ability to control the length of the interaction region in the laboratory allows the switch between a regime representing a clumpy jet or wind and a regime similar to a slowly varying mass loss rate. The results indicate that multiple internal oblique shocks develop in the jet and the possible formation of a second working surface as the jet attempts to tunnel through the ambient medium.     

Hydrocarbon lakes on Titan

The Huygens Probe detected dendritic drainage-like features, methane clouds and a high surface relative humidity (∼50%) on Titan in the vicinity of its landing site [Tomasko, M.G., and 39 colleagues, 2005. Nature 438, 765-778; Niemann, H.B., and 17 colleagues, 2005. Nature 438, 779-784], suggesting sources of methane that replenish this gas against photo- and charged-particle chemical loss on short (10-100) million year timescales [Atreya, S.K., Adams, E.Y., Niemann, H.B., Demick-Montelara, J.E., Owen, T.C., Fulchignoni, M., Ferri, F., Wilson, E.H., 2006. Planet. Space Sci. In press]. On the other hand, Cassini Orbiter remote sensing shows dry and even desert-like landscapes with dunes [Lorenz, R.D., and 39 colleagues, 2006a. Science 312, 724-727], some areas worked by fluvial erosion, but no large-scale bodies of liquid [Elachi, C., and 34 colleagues, 2005. Science 308, 970-974]. Either the atmospheric methane relative humidity is declining in a steady fashion over time, or the sources that maintain the relative humidity are geographically restricted, small, or hidden within the crust itself. In this paper we explore the hypothesis that the present-day methane relative humidity is maintained entirely by lakes that cover a small part of the surface area of Titan. We calculate the required minimum surface area coverage of such lakes, assess the stabilizing influence of ethane, and the implications for moist convection in the atmosphere. We show that, under Titan's surface conditions, methane evaporates rapidly enough that shorelines of any existing lakes could potentially migrate by several hundred m to tens of km per year, rates that could be detected by the Cassini orbiter. We furthermore show that the high relative humidity of methane in Titan's lower atmosphere could be maintained by evaporation from lakes covering only 0.002-0.02 of the whole surface.     

The formation of Ganymede's grooved terrain: Numerical modeling of extensional necking instabilities

Ganymede's grooved terrain likely formed during an epoch of global expansion, when unstable extension of the lithosphere resulted in the development of periodic necking instabilities. Linear, infinitesimal-strain models of extensional necking support this model of groove formation, finding that the fastest growing modes of an instability have wavelengths and growth rates consistent with Ganymede's grooves. However, several questions remain unanswered, including how nonlinearities affect instability growth at large strains, and what role instabilities play in tectonically resurfacing preexisting terrain. To address these questions we numerically model the extension of an icy lithosphere to examine the growth of periodic necking instabilities over a broad range of strain rates and temperature gradients. We explored thermal gradients up to 45 K km⁻¹ and found that, at infinitesimal strain, maximum growth rates occur at high temperature gradients (45 K km⁻¹) and moderate strain rates (10⁻¹³ s⁻¹). Dominant wavelengths range from 1.8 to 16.4 km (post extension). Our infinitesimal growth rates are qualitatively consistent with, but an order of magnitude lower than, previous linearized calculations. When strain exceeds ∼10% growth rates decrease, limiting the total amount of amplification that can result from unstable extension. This fall-off in growth occurs at lower groove amplitudes for high-temperature-gradient, thin-lithosphere simulations than for low-temperature-gradient, thick-lithosphere simulations. At large strains, this shifts the ideal conditions for producing large amplitude grooves from high temperature gradients to more moderate temperature gradients (15 K km⁻¹). We find that the formation of periodic necking instabilities can modify preexisting terrain, replacing semi-random topography up to 100 m in amplitude with periodic ridges and troughs, assisting the tectonic resurfacing process. Despite this success, the small topographic amplification produced by our model presents a formidable challenge to the necking instability mechanism for groove formation. Success of the necking instability mechanism may require rheological weakening or strain localization by faulting, effects not included in our analysis.     

Thermal convection in ice-I shells of Titan and Enceladus

Cassini-Huygens observations have shown that Titan and Enceladus are geologically active icy satellites. Mitri and Showman [Mitri, G., Showman, A.P., 2005. Icarus 177, 447-460] and McKinnon [McKinnon, W.B., 2006. Icarus 183, 435-450] investigated the dynamics of an ice shell overlying a pure liquid-water ocean and showed that transitions from a conductive state to a convective state have major implications for the surface tectonics. We extend this analysis to the case of ice shells overlying ammonia-water oceans. We explore the thermal state of Titan and Enceladus ice-I shells, and also we investigate the consequences of the ice-I shell conductive-convective switch for the geology. We show that thermal convection can occur, under a range of conditions, in the ice-I shells of Titan and Enceladus. Because the Rayleigh number Ra scales with δ³/ηb, where δ is the thickness of the ice shell and ηb is the viscosity at the base of the ice-I shell, and because ammonia in the liquid layer (if any) strongly depresses the melting temperature of the water ice, Ra equals its critical value for two ice-I shell thicknesses: for relatively thin ice shell with warm, low-viscosity base (Onset I) and for thick ice shell with cold, high-viscosity base (Onset II). At Onset I, for a range of heat fluxes, two equilibrium states—corresponding to a thin, conductive shell and a thick, convective shell—exist for a given heat flux. Switches between these states can cause large, rapid changes in the ice-shell thickness. For Enceladus, we demonstrate that an Onset I transition can produce tectonic stress of ∼500 bars and fractures of several tens of km depth. At Onset II, in contrast, we demonstrate that zero equilibrium states exist for a range of heat fluxes. For a mean heat flux within this range, the satellite experiences oscillations in surface heat flux and satellite volume with periods of ∼50-800 Myr even when the interior heat production is constant or monotonically declining in time; these oscillations in the thermal state of the ice-I shell would cause repeated episodes of extensional and compressional tectonism.     

Long-term diagnostics of precipitation estimates and the development of radar hardware monitoring within a radar product data quality management system

Abstract

Quality is key to ensuring that the potential offered by weather radar networks is realized. To achieve optimum quality, a comprehensive radar data quality management system, designed to monitor the end-to-end radar data processing chain and evaluate product quality, is being developed at the UK Met Office. Three contrasting elements of this system are described: monitoring of key radar hardware performance indicators; generation of long-term integrations of radar products; and monitoring of radar reflectivity factor using synthesized observations from numerical weather prediction model fields. Examples of each component are presented and ways in which the different types of monitoring information have been used to both identify issues with the radar product data quality and help formulate solutions are given.

Editor Z.W. Kundzewicz; Guest editor R.J. Moore

Citation Harrison, D., Georgiou, S., Gaussiat, N., and Curtis, A., 2013. Long-term diagnostics of precipitation estimates and the development of radar hardware monitoring within a radar product data quality management system. Hydrological Sciences Journal, 59 (7), 1327–1342. http://dx.doi.org/10.1080/02626667.2013.841316     

Application of trichloroacetic acid (TCA) to extraction of soft body for the determination of tissue Cd, Cu, Pb and Zn in the prosobranch Hydrobia ulvae (Pennant)

The application of trichloroacetic acid (TCA) as a shell extractant for preparation of soft body parts with reference to tissue metal concentrations (Cd, Cu, Pb, Zn) in shellfish has been evaluated on the example of the mud snail Hydrobia ulvae, a small marine prosobranch densely present in rocky and soft-bottom habitats of the eastern Atlantic. A solution of 0.1 M TCA was tested on individuals treated according to two different protocols: (1) thawed after freezing ("non-dried") and (2) thawed and air-dried to a constant weight ("dried"). Two points were investigated in detail to improve the method: individual soft tissue dry weight and tissue metal concentration following a standard digestion method. In both instances, the results were compared with those from manually dissected snails. Conditions for total shell decalcification of 60 individuals (3-4 mm long) were 5.5 h in 20 ml of 0.1 M TCA.No differences in individual soft tissue weight were observed between the treatments, indicating good efficiency of the TCA extraction with respect to weight of soft body parts. In contrast, tissue metal concentrations varied among treatments. The TCA extraction of the dried animals had a good recovery for Cd, most likely due to the lower solubility of Cd vital cellular components (proteins and mineral concretions) from the dried tissue. Satisfactory recoveries of the tissue concentrations of Cu and Pb were obtained for the non-dried individuals. This might be related to the specific distribution of metals in the organism (namely in the digestive glands and gonads) and their different chemical reactivity with TCA after the tissue was dried. Limited susceptibility of Zn-bearing protein bindings to complexing with TCA also accounts for significantly lower concentrations of Zn in the mud snail's soft tissue that was extracted. The 0.1 M TCA solution is therefore recommended for extraction of the shells of Hydrobia ulvae for tissue determination of Cd, Cu and Pb; however the treatment protocol does affect metal recovery and thus a consistent procedure should be followed.The extracted metals from the soft tissues and shells of the mud snails (on the basis of both metal concentrations and contents) were ranked in order of increasing contribution of soft body parts to the total (shell+tissue): Pb相似文献