Accuracy assessment of moderate resolution image spectroradiometer products for dust storms in semiarid environment

Dust storms are strongly and negatively associated with the annual cycle of rainfall and coincide with the west and southwesterly winds in west and south west of Iran. Accuracy assessment of particulate matter products of moderate resolution image spectroradiometer was studied in this research. Moderate resolution image spectroradiometer products consist of aerosol optical thickness, its corresponding image red, green and blue and moderate resolution image spectroradiometer/ terra calibrated radiances 5 minutes L1B swath 1 km, which shows the environmental information at terrestrial, atmospheric and ocean phenomenology. Daily aerosol optical thickness data retrieved from moderate resolution image spectroradiometer from May 2009 to May 2010 were compared with the amount of particulate matter measured at ground in Sanandaj, Iran, using non-linear correlation coefficient. Results showed that the moderate resolution image spectroradiometer image / terra calibrated radiances 5 minutes L1B swath 1 km is able to detect dust storms distribution and their blowing direction over study area clearly. The air quality conditions obtained in with dust storm period were unhealthy and correlation coefficients between moderate resolution image spectroradiometer aerosol optical thickness and particulate matter concentration in this period were higher than without dust storm period. The moderate resolution image spectroradiometer aerosol optical thickness values lower than 0.1 were acquired uncertainty level. Comparison of moderate resolution image spectroradiometer images/ terra calibrated radiances 5 minutes L1B swath 1 km and image red, green and blue showed that moderate resolution image spectroradiometer has limitation in retrieval of aerosol optical thickness from the dust storm with high concentration of particulate matter. This study reveals that the algorithm which is applied to refine the aerosol optical thickness is not able to recognize the amount of particulate matter in low and very high concentrations sensitively. No study has previously been conducted to investigate the accuracy of the moderate resolution image spectroradiometer particulate matter products.     

Bioaugmentation for the enhancement of hydrocarbon phytoremediation by rhizobacteria consortium in pilot horizontal subsurface flow constructed wetlands

The development of the bioaugmentation during the phytoremediation of contaminated water with diesel in pilot horizontal subsurface flow constructed wetlands was investigated for 63 days. The objective of this study was to examine the enrichment of rhizobacteria in a pilot-scale system for efficient treatment of total petroleum hydrocarbon (TPH) effluent. A consortium of three rhizobacteria strains (Bacillus aquimaris, Bacillus anthracis and Bacillus cereus), which were able to utilize hydrocarbon compounds as sole carbon sources, was injected into the constructed wetlands (batchwise operation) planted with Scirpus grossus. The TPH removals from water, without or with the addition of rhizobacteria, were found to be 72 and 84%, while from sand was found to be 59 and 77%, for each treatment, respectively. These results showed that the rhizobacteria strains could enhance S. grossus growth by decreasing diesel stress and protecting S. grossus against diesel, with 12 and 18% additional TPH removal from water and sand, respectively. Our results demonstrate that S. grossus is potential to improve the phytoremediation of hydrocarbon contaminants through inoculation with effective rhizobacterial strains.     

Swelling Behaviour of Expansive Shales from the Middle Region of Saudi Arabia

Severe and widespread damage in residential buildings, sidewalks and pavements in various parts of the middle region of Saudi Arabia is caused by the development of heave and swelling pressure in the expansive shales in the region. This paper presents the problems and the geotechnical and physicochemical properties of the tested shales. The swelling potential was determined using various methods. Swell tests were conducted under different loading conditions and following different procedures to quantify the amount of vertical swell and swelling pressure. The conventional one-dimensional oedometer swell tests were performed using three different procedures, namely, free swell, constant volume swell and swell overburden. In addition, swell tests were performed in the stress path triaxial apparatus. Tests under different vertical stresses and confinements were conducted. Vertical swell and swelling pressure obtained from the various methods were compared. The reliability of the different methods for estimation of swelling potential is discussed.     

Modeling of gas generation from the Alam El-Bueib formation in the Shoushan Basin, northern Western Desert of Egypt

The Shoushan Basin is an important hydrocarbon province in the northern Western Desert, Egypt, but the burial/thermal histories for most of the source rocks in the basin have not been assigned yet. In this study, subsurface samples from selected wells were collected to characterize the source rocks of Alam El-Bueib Formation and to study thermal history in the Shoushan Basin. The Lower Cretaceous Alam El-Bueib Formation is widespread in the Shoushan Basin, which is composed mainly of shales and sandstones with minor carbonate rocks deposited in a marine environment. The gas generative potential of the Lower Cretaceous Alam El-Bueib Formation in the Shoushan Basin was evaluated by Rock–Eval pyrolysis. Most samples contain sufficient type III organic matter to be considered gas prone. Vitrinite reflectance was measured at eight stratigraphic levels (Jurassic–Cretaceous). Vitrinite reflectance profiles show a general increase of vitrinite reflectance with depth. Vitrinite reflectance values of Alam El-Bueib Formation range between 0.70 and 0.87 VRr %, indicating a thermal maturity level sufficient for hydrocarbon generation. Thermal maturity and burial histories models predict that the Alam El-Bueib source rock entered the mid-mature stage for hydrocarbon generation in the Tertiary. These models indicate that the onset of gas generation from the Alam El-Bueib source rock began in the Paleocene (60 Ma), and the maximum volume of gas generation occurred during the Pliocene (3–2 Ma).     

Socio-political and ecological stresses on traditional pastoral systems: A review

Journal of Geographical Sciences - Pastoralism is a viable socio-economic system-shaped by landless and agro-pastoral communities in many pastoral regions of the world. This system is mainly based...     

Comparative Analyses of the Point Cloud Produced by Using Close-Range Photogrammetry and Terrestrial Laser Scanning for Rock Surface

Point cloud produced by using theoretically and practically different techniques is one of the most preferred data types in various engineering applications and projects. The advanced methods to obtain point cloud data in terrestrial studies are close range photogrammetry (CRP) and terrestrial laser scanning (TLS). In the TLS technique, separated from the CRP in terms of system structure, denser point cloud at certain intervals can be produced. However, point clouds can be produced with the help of photographs taken at appropriate conditions depending on the hardware and software technologies. Adequate quality photographs can be obtained by consumer grade digital cameras, and photogrammetric software widely used nowadays provides the generation of point cloud support. The tendency and the desire for the TLS are higher since it constitutes a new area of research. Moreover, it is believed that TLS takes the place of CRP, reviewed as antiquated. In this study that is conducted on rock surfaces located at Istanbul Technical University Ayazaga Campus, whether point cloud produced by means photographs can be used instead of point cloud obtained by laser scanner device is investigated. Study is worked on covers approximately area of 30 m?×?10 m. In order to compare the methods, 2D and 3D analyses as well as accuracy assessment were conducted. 2D analysis is areal-based whereas 3D analysis is volume-based. Analyses results showed that point clouds in both cases are similar to each other and can be used for similar other studies. Also, because the factors affecting the accuracy of the basic data and derived product for both methods are quite variable, it was concluded that it is not appropriate to make a choice regardless of the object of interest and the working conditions.