Investigation on the Effect of Geometrical and Geotechnical Parameters on Elongated Offshore Piles Using Fuzzy Inference Systems

Among numerous offshore structures used in oil extraction, jacket platforms are still the most favorable ones in shallow waters. In such structures, log piles are used to pin the substructure of the platform to the seabed. The pile’s geometrical and geotechnical properties are considered as the main parameters in designing these structures. In this study, ANSYS was used as the FE modeling software to study the geometrical and geotechnical properties of the offshore piles and their effects on supporting jacket platforms. For this purpose, the FE analysis has been done to provide the preliminary data for the fuzzy-logic post-process. The resulting data were implemented to create Fuzzy Inference System (FIS) classifications. The resultant data of the sensitivity analysis suggested that the orientation degree is the main factor in the pile’s geometrical behavior because piles which had the optimal operational degree of about 5° are more sustained. Finally, the results showed that the related fuzzified data supported the FE model and provided an insight for extended offshore pile designs.     

Evaporitic sedimentation and microbial mats in a salina system (Port Fouad,Egypt)

A salina system along the Mediterranean coast of Egypt was investigated. Five sedimentary facies are described. For each facies, the evaporitic sedimentation and the biological conditions are considered. Comparisons of evaporite precipitates in the salina with ancient deposits are made.     

Structural Setting and Kinematic Analysis of the Halaban Region,Eastern Arabian Shield,Saudi Arabia

The vorticity analysis technique was applied to measure the different lithological units,such as schist,metagranite and metavolcano-sedimentary rocks,which are present in the Halaban region.This work aims to interpret the relationship between the different lithologies and the tectonic setting,in order to elucidate the nature of kinematic analysis in the Halaban region.The kinematic analyses were applied to feldspar porphyroclasts,quartz and hornblende for twentysix samples.The kinematic vorticity number (W_m) for deformed rocks in the study area ranged from～0.6 to 0.9.The direction of the long axes for finite strain data (X axes) revealed a WNW trend with shallow dipping.The direction of the short axes for finite strain data (Z axes) were represented by vertical with associated horizontal foliation.The results of the kinematic vorticity and strain analyses are characterized by simple shear with different degrees of deformation in the Halaban region.Furthermore,our finite strain data shows no significant volume change during deformation.The subhorizontal foliation was synchronized with thrusting and deformation.Furthermore,throughout the overlying nappes,the same attitudes of tectonic contacts are observable,the nappes in the orogens being formed from simple shear deformation.     

Removal of uranium(VI) from aqueous solutions using Eucalyptus citriodora distillation sludge

Adsorption and desorption of uranium(VI) from dilute aqueous solutions by Eucalyptus citriodora distillation sludge was studied in a batch mode. The potential of Eucalyptus citriodora distillation sludge to remove uranium(VI) from aqueous solutions has been investigated at different conditions of solution pH, metal ion concentrations, biosorbent dosage, biosorbent particle size, contact time and temperature. The results indicated that biosorption capacity of Eucalyptus citriodora distillation sludge was strongly affected by the medium pH, the biosorbent dose, metal ion concentrations and medium temperature. Reduction in particle size increased the biosorption capacity. Langmuir and Freundlich isotherm models were applied to biosorption data to determine the biosorption characteristics. An optimum biosorption capacity (57.75 mg/g) was achieved with pH 4.0, particle size 0.255 mm, biosorbent dose 0.5 g/100 mL and initial uranium(VI) concentration of 100 mg/L. Uranium(VI) removal by Eucalyptus citriodora distillation sludge was rapid, the equilibrium was established within 60 min and pseudo-second-order model was found to fit with the experimental data. The biosorption process decreased with an increase in the temperature indicating its exothermic nature. Pretreatments of biomass with different reagents affected its biosorption capacity. A significant increase (34 %) in biosorption capacity (83.25 mg/g) was observed with benzene treatment. Fourier-transform infra-red studies showed the involvement of carbonyl, carboxyl and amide groups in the biosorption process. The results indicated that sulfuric acid had the best effects as an eluent showing 93.24 % desorption capacity.     

Laboratory study of soil-CFRP interaction using pull-out test

Soil is a material which is weak in tension; however, different materials such as geotextiles are used to address this inadequacy. In recent years more than one million square metres of geotextiles were used for reinforcing soil. Nevertheless, there are several significant problems associated with geotextiles, such as creep, low modulus of elasticity and susceptibility to aggressive environments. Carbon fibre reinforced polymer (CFRP) was introduced over two decades ago to the field of structural engineering and it can also be used in geotechnical engineering. CFRP has all the benefits associated with geotextiles and it boasts a higher strength, higher modulus, no creep and reliability in aggressive environments. In this investigation, the interface properties of CFRP-sand and fine sand were investigated using the pull-out test. The pull-out test device was designed and assembled using a triaxial loading device and a direct shear device. In the pull-out test, the normal force applied by the triaxial loading and pull-out force is applied by a direct shear device. CFRP samples were prepared in the lab. Precast and cast-in-place samples were tested. The pull-out force and corresponding displacements of each of the materials were recorded and compared.     

Distribution of heavy metals in the clastic fine-grained sediments of Gavkhuni playa lake (Southeast of Isfahan,Iran)

The sedimentary basin of Gavkhuni playa lake includes two sedimentary environments of delta and playa lake. These environments consist of mud, sand and salt flats. There are potentials for concentration of heavy metals in the fine-grained sediments (silt and clay) of the playa due to existence of Pb/Zn ore deposits, industrial and agricultural regions in the water catchment of Zayandehrud River terminating to this area. In order to study the concentration of heavy metals and the controlling factors on their distribution in the fine-grained sediments, 13 samples were taken from the muddy facies and concentration of the heavy metals were determined. The results showed that the heavy metal concentrations range in the sediments (in ppm) are Mn (395.5–1,040), Sr (100.4–725.76), Pb (14.66–91.06), Zn (23.59–80.9), Ni (37–73.66), Cu (13.83–29.83), Co (5.73–13.78), Ag (3.03–4.76) and Cd (2.3–5.5) in their order of abundances. The concentration of Ag is noticeable in the sediments relative to the average concentration of this element in mud sediments. The amounts of Pb and Zn are relatively high in all the samples in comparison with the other elements. The concentration of Ni is relatively high in the oxidized samples. The distribution of Pb is directly related to organic matter content of the sediments. The concentrations of Zn, Sr, Cu, Co and Cd in the samples of the playa are lower than those in the delta. The amount of illite is another factor influencing Zn and Pb concentrations. Sr is more concentrated in the sediments with the high content of calcium carbonate. The distribution pattern of Cu, Co, Pb and Mn resembles to that of the clay content of the sediments. The clay content shows positive correlations with Co, Cu and Mn concentrations and negative correlation with Ag. The Sr and Ag concentrations are positively correlated with the amount of CaCO₃. The amounts of Co, Cu, Ni and Mn show negative correlations with the calcium carbonate content. Pb and Co are noticeably correlated with Mn.